Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation: If symptomatic, move to fresh air. Get medical attention if symptoms persist.
Eyes: Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention.
Skin: Wash with soap and water. Get medical attention if symptoms occur.
Ingestion: Seek medical advice.

Fire-fighting measures

Extinguishing Media: water spray, dry chemical, carbon dioxide
Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Hazardous Combustion Products: carbon dioxide, carbon monoxide
Unusual Fire and Explosion Hazards: Powdered material may form explosive dust-air mixtures.
Sensitivity to Static Discharge: This material exhibits low minimum ignition energy which indicates an unusual susceptibility to ignition by electrostatic discharge.

Accidental release measures

Use personal protective equipment. Sweep up and place in a clearly labeled container for chemical waste.

Handling and storage

Personal Precautionary Measures: Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling.
Prevention of Fire and Explosion: Keep from contact with oxidizing materials. Minimize dust generation and accumulation. In the United States of America, refer to NFPA® Pamphlet No. 654, "Prevention of Fire and Dust Explosions in the Chemical, Dye, Pharmaceutical, and Plastics Industries."
Storage: Keep container closed.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Ventilation: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Respiratory Protection: If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn. In the United States of America, if respirators are used, a program should be instituted to assure compliance with OSHA Standard 63 FR 1152, January 8, 1998. Respirator type: Air-purifying respirator with an appropriate, government approved (where applicable), air-purifying filter, cartridge or canister. Contact health and safety professional or manufacturer for specific information.
Eye Protection: Wear safety glasses with side shields (or goggles). Wear a full-face respirator, if needed.
Skin Protection: It is a good industrial hygiene practice to minimize skin contact.
Recommended Decontamination Facilities: eye bath, washing facilities

Stability and reactivity

Stability:
Stable; however, material can decompose at elevated temperatures.
Incompatibility:
Material reacts with strong oxidizing agents.
Hazardous Polymerization:
Will not occur.

Disposal considerations

Discharge, treatment, or disposal may be subject to national, state, or local laws. Incinerate. Since emptied containers retain product residue, follow label warnings even after container is emptied.