Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

. FIRST AID MEASURES
General advice
Move out of dangerous area. Place and transport victim in stable position (lying sideways). Remove contaminated clothing immediately and dispose of safely.

Inhalation
Move to fresh air. Keep patient warm and at rest. Call a physician or poison control center immediately.

Skin contact
Wash off thoroughly with plenty of soap and water, if available with polyethyleneglycol 400, subsequently rinse with water. Call a physician or poison control center immediately.

Eye contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a physician or poison control center immediately.

Ingestion
Rinse mouth. Do NOT induce vomiting. Call a physician or poison control center immediately.

Notes to physician

Treatment
Treat symptomatically.
In case of ingestion gastric lavage should be considered in cases of significant ingestions only within the first 2 hours. However, the application of activated charcoal and sodium sulphate is always advisable.

Fire-fighting measures

FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable
Water spray, Carbon dioxide (CO2), Foam, Sand
5.2 Special hazards arising from the substance or mixture
In the event of fire the following may be released:, Hydrogen chloride (HCl), Hydrogen cyanide (hydrocyanic acid), Carbon monoxide (CO), Nitrogen oxides (NOx)
5.3 Advice for firefighters
Special protective equipment for fire-fighters
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing apparatus.
Further information
Contain the spread of the fire-fighting media. Do not allow run-off from fire fighting to enter drains or water courses.

Accidental release measures

ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Precautions
Avoid contact with spilled product or contaminated surfaces. Use personal protective equipment.
6.2 Environmental precautions
Do not allow to get into surface water, drains and ground water.
6.3 Methods and materials for containment and cleaning up
Methods for cleaning up
Use mechanical handling equipment. Clean contaminated floors and objects thoroughly, observing environmental regulations. Keep in suitable, closed containers for disposal.

Handling and storage

Manufacture and use takes place under strictly controlled conditions. The substance is rigorously contained (production, use), appropriate risk management measures are applied and a management system is in place. An authorisation scheme covers the process and a procedure ensures that only trained and authorised persons handle the substance. Process procedures for containment during cleaning and maintenance have been accounted for in plant and engineering design as appropriate for the site. Procedures to ensure containment have been applied for all stages of production and processing. Occupational procedures have been assessed and are documented.

Precautions for safe handling
Advice on safe handling
Use only in area provided with appropriate exhaust ventilation.
Hygiene measures
Avoid contact with skin, eyes and clothing. Keep working clothes separately. Wash hands immediately after work, if necessary take a shower. Remove soiled clothing immediately and clean thoroughly before using again. Garments that cannot be cleaned must be destroyed (burnt).
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Store in a place accessible by authorized persons only.
Advice on common storage
Keep away from food, drink and animal feedingstuffs.

Transport information

Land transport (ADR/RID)

UN number:
2928
Proper shipping name and description:
TOXIC SOLID, CORROSIVE, ORGANIC, N.O.S.
(2-CHLORO-5-CHLOROMETHYLPYRIDINE )
Chemical name:
2-Chloro-5-chloromethylpyridine
Language:
English
Class:
6.1
Classification code:
TC2
Packaging group:
II
Labels:
6.1 (8)
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2928
Proper shipping name and description:
TOXIC SOLID, CORROSIVE, ORGANIC, N.O.S.
(2-CHLORO-5-CHLOROMETHYLPYRIDINE )
Chemical name:
2-Chloro-5-chloromethylpyridine
Language:
English
Class:
6.1
Classification code:
TC2
Packaging group:
II
Labels:
6.1 (8)
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2928
Proper shipping name and description:
TOXIC SOLID, CORROSIVE, ORGANIC, N.O.S.
(2-CHLORO-5-CHLOROMETHYLPYRIDINE )
Chemical name:
2-Chloro-5-chloromethylpyridine
Class:
6.1
Packaging group:
II
EmS code:
F-A, S-B
Labels:
6.1 (8)
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2928
Proper shipping name and description:
TOXIC SOLID, CORROSIVE, ORGANIC, N.O.S.
(2-CHLORO-5-CHLOROMETHYLPYRIDINE )
Chemical name:
2-Chloro-5-chloromethylpyridine
Class:
6.1
Packaging group:
II
Labels:
6.1 (8)
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Manufacture and use takes place under strictly controlled conditions. The substance is rigorously contained (production, use), appropriate risk management measures are applied and a management system is in place. An authorisation scheme covers the process and a procedure ensures that only trained and authorised persons handle the substance. Process procedures for containment during cleaning and maintenance have been accounted for in plant and engineering design as appropriate for the site. Procedures to ensure containment have been applied for all stages of production and processing. Occupational procedures have been assessed and are documented.

Exposure controls
Respiratory protection
If product is handled while not enclosed, and if contact may occur:
Wear respirator with a particle filter mask (protection factor 20) conforming to European Norm EN149FFP3 or EN140P3 or equivalent.
Hand protection
Wear CE Marked (or equivalent) nitrile rubber gloves (minimum thickness of 0,4 mm). Wash when contaminated and dispose ofwhen contaminated inside, when perforated or when contamination on the outside cannot be removed. Wash hands frequently and always before eating, drinking, smoking or using the toilet.
Eye protection
Wear goggles (conforming to EN166, Field of Use = 5 or equivalent) and faceshield (conforming to EN166, Field of Use = 3 or equivalent).
Skin and body protection
Wear standard coveralls and Category 3 Type 3 suit.
Wear two layers of clothing wherever possible. Polyester/cotton or cotton overalls should be worn under chemical protection suit and should be professionally laundered frequently.
If chemical protection suit is splashed, sprayed or significantly contaminated, decontaminate as far as possible, then carefully remove and dispose of as advised by manufacturer.
General protective measures
If product is handled while not enclosed, and if contact may occur:
Complete suit protecting against chemicals

Stability and reactivity

Reactivity
Thermal decomposition
from 290 °C, Heating rate: 3 K/min
10.3 Possibility of hazardous reactions
No hazardous reactions when stored and handled according to prescribed instructions.

Disposal considerations


This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management systems is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant’s intermediate.

During the whole life cycle of the substance all necessary measures in accordance to art. 18(4) of (EC) 1907/2006 are undertaken. The substance is handled under strictly controlled conditions.