Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-984-6 | CAS number: -
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Version / remarks:
- 2016
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Version / remarks:
- 2006
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
- Version / remarks:
- 2002
- Deviations:
- no
- GLP compliance:
- yes
- Type of method:
- pycnometer method
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: PX708164
- Expiration date of the lot/batch:
STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: At room temperature container flushed with nitrogen - Dynamic viscosity of test material:
- 27 - 63 mPa.s at 23 °C (ISO 3219)
- Key result
- Type:
- relative density
- Density:
- 0.965 other: no dimension
- Temp.:
- 20 °C
- Type:
- density
- Density:
- 0.965 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- The density of the test item at 20ºC was 0.965 g/cm3 (0.965x103 kg/m3). The relative density was 0.965.
- Executive summary:
A pycnometer was used for the determination of the density and relative density of Setalux 7002 BX-55.
The density of the test item at 20ºC was 0.965 g/cm3 (0.965x103 kg/m3). The relative density was 0.965.
Reference
Table 1 shows the determined volume of the pycnometer. The results of the test for the determination of the density of the test item are given in Table 2.
The individual measurements were obtained with a deviation of≤ 0.01 g/cm3. According to the guideline, the density of the test item is given as the mean value.
Table 1 Volume of the Pycnometer
|
Test 1 |
Test 2 |
Mean |
Mass empty pycnometer (A) |
30.4745 g |
30.4755 g |
30.4750 g |
Mass pycnometer with water (B) |
40.1095 g |
40.1094 g |
|
Volume of the pycnometer |
9.6524 cm3 |
9.6513 cm3 |
9.6519 cm3 |
Table 2 Density of the Test Item
|
Test 1 |
Test 2 |
Mean |
Mass pycnometer with test item (C) |
39.7872 g |
39.7950 g |
|
Density |
0.9648 g/cm3 |
0.9656 g/cm3 |
0.965 g/cm3 |
Description of key information
A pycnometer was used for the determination of the density and relative density of Setalux 7002 BX-55. The density of the test item at 20ºC was 0.965 g/cm3 (0.965x103 kg/m3). The relative density was 0.965.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.965
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
