Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

EYES: Flush eyes with water for 15 minutes. If irritation persists, get medical attention
SKIN: Wash skin thoroughly with soap and water. If irritation persists, get medical attention. For hot resin, immediately immerse in or flush with large amounts of cold water and get prompt medical attention. No attempt should be made to remove material from skin, except under the direction or care of a medical provider.
INHALATION: Remove to fresh air.
INGESTION: Give on or two glasses of water to drink. Consult with medical professional.

Fire-fighting measures

FIRE & EXPLOSION HAZARDS: During a fire, irritating and toxic gases may be generated by thermal decomposition or combustion.
EXTINGUISHING MEDIA: All extinguishing agents classified as A or B, such as water, dry chemical, and carbon dioxide, are effective.
FIRE FIGHTING INSTRUCTIONS: Avoid inhalation of smoke. As in any fire, wear self-contained breathing apparatus, pressure demand and full protective gear.

Accidental release measures

Allow hot resin to solidify and scrape up. Place spilled resin in suitable disposal container.

Handling and storage

HANDLING: Use basic industrial and personal hygiene practices applicable to all chemical handling. Avoid contact with skin and eyes; avoid breathing vapors of hot resin. Wash after handling, and before eating, drinking, or smoking. When working with hot resin, avoid contact and use appropriate personal protective equipment to prevent burns.
STORAGE: Avoid high temperatures. Keep resin below 50°C.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

When heating resin, use adequate mechanical ventilation to remove molten resin vapors. When working with hot resin, wear personal protective equipment, such as chemical goggles, face shield, heat-resistant gloves, and other protective clothing, appropriate to the task and exposure, to prevent burns.

Stability and reactivity

STABILITY: Stable.
CONDITIONS TO AVOID: Temperatures above 200°C
IMCOMPATIBILITY WITH OTHER MATERIALS: None.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: Material may decompose into toxic byproducts when heated to temperatures above 200°C.

Disposal considerations

This product is not listed as a federal hazardous waste and does not exhibit any hazardous waste characteristics in 40 CFR 261 (US EPA). State or local hazardous waste regulations may apply if different form federal regulations.