Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency and First Aid Procedures       

If inhaled, remove the exposed person from exposure. Get medical attention immediately, if symptoms develop.

If breathing has stopped, start artificial respiration immediately and maintain until physician takes charge of the exposed person.

If swallowed and the exposed person is conscious, give 1 or 2 glasses of water or milk and induce vomiting by touching the back of throat with finger. If vomiting occurs, give several glasses of fluids again. Never give anything by mouth to an unconscious person. Make the exposed person lie down and keep him/her steady. Get medical attention immediately.

If in eyes, wash immediately with large amounts of water until no evidence of chemical remains. Get medical attention immediately.

In case of contact with skin, immediately flush skin with plenty of water while removing contaminated clothing and shoes. Get medical attention if needed.

      

Note to Physician              

Treatment is symptomatic.

Fire-fighting measures

Extinguishing Media and Procedure       

Dry chemical, carbon dioxide, water spray or foam.

Use water spray to keep fire-exposed containers cool. Approach fire from upwind to avoid hazardous vapours and toxic

decomposition products. Fight fire from protected location or maximum possible distance. Avoid heavy hose streams. Dike area to prevent water runoff. Firemen should wear self-contained breathing apparatus and protective clothing.

      

Hazardous Decomposition or Byproducts in a Fire                

The essential breakdown carbon monoxide and carbon dioxide.

Accidental release measures

Personal Protection                

Observe all protection and safety precautions when cleaning up spills, see 8. Do not touch spilled material.

Steps to Be Taken in Case of Spill         

Small liquid spills on the floor or other impervious surface should be swept up by means of an inert absorptive material such as hydrated lime, sawdust, Fuller’s earth or other inert absorbent. Scoop into proper containers and dispose of in accordance with the instructions provided under Disposal (see 13). Rinse area with strong industrial detergent.

Large liquid spills on the floor or other impervious surface should be contained or diked and then absorbed with an inert absorptive material such as hydrated lime, sawdust, Fuller’s earth or other inert absorbent. Collect the contaminated absorbent, place in a metal drum and dispose of in accordance with the instructions provided under Disposal (see 13). Rinse area with strong industrial detergent.

Large spills that soak into the ground should be dug up, placed in metal drums and disposed of in accordance with instructions provided under Disposal .

Handling and storage

Avoid all contact with the substance. Chemical is an intermediate under strictly controlled conditions and as such not ment to be handled manually, but instead ment to be handled mechanically and consumed in a chemical reaction.

Precautions to Be Taken in Handling  

Static electricity may develop when carenone flows through pipes or tubes, when flowing from at tap or drain, or when a free falling flow splits while forming droplets. Take precautions to divert static electricity.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Substance is not transported, since it is an onsite isolated intermediate

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Substance is not transported, since it is an onsite isolated intermediate

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Substance is not transported, since it is an onsite isolated intermediate

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Substance is not transported, since it is an onsite isolated intermediate

Additional transport information

Additional information
Special provisions / remarks / other:
Substance is not transported, since it is an onsite isolated intermediate

Exposure controls / personal protection

Chemical is an intermediate under strictly controlled conditions and as such not ment to present any chance for exposure, but instead ment to be consumed in a chemical reaction. However the following can be considered when the possibily for exposure arises, for example at accidents, spills, but also when maintaing and inspecting equipment.

The substance is not expected to be harmful by single exposure. However, it should always be treated with the usual care of handling chemicals.

1. Technical protection measures: used under strictly controlled conditions

2. Organisational protection measures: used under strictly controlled conditions

3. Hand protection: Wear chemical resistant gloves such as barrier laminate, butyl rubber, nitrile rubber or viton if much manual labour with the substance is required.

4. Feet protection: Wear appropriate chemical resistant footwear to avoid skin contact.

5. Body protection: Wear appropriate chemical resistant clothing to avoid skin contact.

6. Eye protection: Wear safety glasses. It is recommended to have an emergency eye wash fountain immediately available in the work area, if the possibility of eye contact exists.

7. Respiratory protection

Stability and reactivity

Reactivity              

To our knowledge, the substance has no special reactivities.

Chemical stability              

The substance is stable during normal handling and storage at ambient temperatures.

Possibility of hazardous reactions       

None known.

Conditions to avoid              

Heating of the substance will evolve harmful and irritant vapours.

Incompatible materials              

None known.

Disposal considerations

Chemical is an intermediate and as such not ment to be disposed of, but instead ment to be consumed in a chemical reaction.

Remains and unclean packagings should be treated as hazardous material. Waste can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not discharge to sewer systems.

Disposal of waste and packagings must always be in accordance with all applicable local regulations.