Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- General advice:

Move out of dangerous area. Do not leave the victim unattended.

- Following inhalation:

If breathed in, move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

- Following skin contact:

Remove contaminated clothing. If irritation develops, get medical attention.

If on skin, rinse well with water. First aid is not normally required.  However, it is recommended that exposed areas be cleaned by washing with soap and water.

Wash contaminated clothing before re-use.

- Following eye contact:

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist.

- Following ingestion:

Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Fire-fighting measures

- Suitable extinguishing media:

High volume water jet, Water spray, Foam. Use extinguishing measures that are appropriate to local circumstances

and the surrounding environment.

- Special hazards arising from the substance or mixture:

No hazardous combustion products are known

- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus.

Standard procedure for chemical fires. Product is compatible with standard fire-fighting agents.

Avoid dust formation.

Take measures to prevent the build up of electrostatic charge.

Provide appropriate exhaust ventilation at places where dust is formed.

Accidental release measures

- Personal precautions:

Use personal protective equipment. Avoid dust formation. Avoid breathing dust. Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed.

- Environmental precautions:

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.

- Methods and material for containment and cleaning up: Keep in suitable, closed containers for disposal. Sweep up and shovel into suitable containers for disposal. Wash walking surfaces with detergent and water to reduce slipping hazard.

Comply with all applicable federal, state, and local regulations.

Handling and storage

- Precautions for safe handling:

Avoid dust formation. Do not breathe vapours/dust. Do not smoke.

Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.

Container hazardous when empty.

Smoking, eating and drinking should be prohibited in the application area.

Dispose of rinse water in accordance with local and national regulations.

Provide sufficient mechanical (general and/or local exhaust) ventilation  to maintain exposure below exposure guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects.

Provide appropriate exhaust ventilation at places where dust is formed.

- Conditions for safe storage, including any incompatibilities: Keep in a dry place. No decomposition if stored and applied as directed.

TRGS 510: Storage class (TRGS 510)

Keep container tightly closed in a dry and well-ventilated place. No smoking.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Industrial hygiene: Avoid breathing dust. Wash hands before breaks and at the end of workday.

Hand protection: The suitability for a specific workplace should be discussed with the producers of the protective gloves.

butyl rubber gloves: 480 min > 0.5 mm - The exact break through time can be obtained from the protective glove producer and this has to be observed.

Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Eye protection: Safety glasses

Body protection: Wear as appropriate: Safety shoes, Dust impervious protective suit, Choose body protection according to the amount and concentration of

the dangerous substance at the work place. Discard gloves that show tears, pinholes, or signs of wear.

Respiratory protection: In the case of dust or aerosol formation use respirator with an approved filter within the capabilities of the respirator/filter

combination. Where concentrations are above recommended limits or are unknown, or a cartridge type respirator is not adequate, wear a positive-pressure

supplied-air respirator.

Stability and reactivity

Keep in a dry place.

No decomposition if stored and applied as directed.

Disposal considerations

Empty remaining contents.

Dispose of as unused product.

Empty containers should be taken to an approved waste handling site for recycling or disposal.

Do not re-use empty containers.

Do not dispose of waste into sewer.

Do not contaminate ponds, waterways or ditches with chemical or used container.

Send to a licensed waste management company.