Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 222-328-5 | CAS number: 3426-45-7
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 15 September 2016 to 31 August 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- yes
- Remarks:
- The deviation is not considered to affect the quality or the integrity of the study. The purging time was less than 20 minutes.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- yes
- Remarks:
- The deviation is not considered to affect the quality or the integrity of the study. The purging time was less than 20 minutes.
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- air comparison pycnometer (for solids)
- Key result
- Type:
- relative density
- Density:
- >= 2.607 - <= 2.609 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- The relative density of the test item is 2.608 +/- 0.001.
- Executive summary:
The density of the test item was determined with the air comparison pycnometer according to recognized guidelines (OECD Guideline 109 and EU method A.3) and under GLP.
A deviation (which didn't affect the quality or the integrity of the study) has been observed during this test.
Before the test, the validity of the apparatus was check with a reference item. The results obtained were conform with the theroretical data so the apparatus was considered suitable for used.
The relative density of the test item was obtained by the ratio of the test item density at 20°C and the water density at 4°C. The relative density obtained was 2.608 +/- 0.001.
Reference
Two assays (consisting of 3 runs) have been performed. The difference between the results obtained was less than 0.2%.
Based on the data obtained in these tests and the water density at 4°C (0.999975 g.cm3), the relative density of the test item is between 2.607 and 2.609.
Description of key information
The density of the test item was determined with the air comparison pycnometer according to recognized guidelines (OECD Guideline 109 and EU method A.3) and under GLP.
A deviation (which didn't affect the quality or the integrity of the study) has been observed during this test.
Before the test, the conformity of the apparatus was check with a reference item. The results obtained were conform with the theoretical data so the apparatus was considered suitable for used.
Key value for chemical safety assessment
- Relative density at 20C:
- 2.608
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
