Aangenomen adviezen en eerdere raadplegingen over autorisatieaanvragen

Aangenomen adviezen en eerdere raadplegingen over autorisatieaanvragen

Aangenomen adviezen en eerdere raadplegingen over autorisatieaanvragen

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0357-01 Review report potassium dichromate 231-906-6 7778-50-9 LYNRED Industrial use of potassium dichromate-based mixtures during the step of final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology. Opinion development Details
0332-02 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0351-01 Initial Potassium dichromate 231-906-6 7778-50-9 TURDUS TESTERS OF CAPACITY Industrial use of a potassium dichromate-based mixture for the manufacture of single-use chemical breathalysers Opinion development Details
0048-01 Initial Potassium dichromate 231-906-6 7778-50-9 LYNRED [name of applicant in the original application: “SOFRADIR” updated due to a notified corporate name change] Industrial use of potassium dichromate-based mixtures during the steps of initial and final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology Commission decided Details
0072-05 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided Details
0048-02 Initial Potassium dichromate 231-906-6 7778-50-9 LYNRED [name of applicant in the original application: “SOFRADIR” updated due to a notified corporate name change] Industrial use of potassium dichromate based mixture during the etching of both InSb substrate sides during the production of optoelectronic components gathering a readout and an infrared detecting circuit with the InSb technology Commission decided Details
0327-02 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0072-04 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0098-01 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of potassium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided Details
0342-02 Review report Potassium dichromate 231-906-6 7778-50-9 Brenntag Chemicals Distribution (Ireland) Ltd Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0062-01 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0358-01 Review report Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of printed circuit board. Opinion development Details
0115-04 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of alkali metal dispensers containing sodium chromate for production of photocathodes. Commission decided Details
0099-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change]
Formulation of Mixtures of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Commission decided Details
0341-03 Review report Sodium chromate 231-889-5 7775-11-3 Boeing Distribution Deutschland GmbH; HAAS GROUP INTERNATIONAL SP. Z.O.O Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0336-03 Review report Sodium chromate 231-889-5 7775-11-3 HAAS GROUP INTERNATIONAL SP. Z.O.O; Boeing Distribution Deutschland GmbH Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0115-02 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided Details
0030-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Dometic GmbH
  • Dometic Hűtőgépgyártó és Kereskedelmi Zrt.
The use of sodium chromate as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75% by weight (Cr6+) in the cooling solution Commission decided Details
0099-02 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change]
Use of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Commission decided Details
0136-01 Initial Sodium chromate 231-889-5 7775-11-3 Ariston Thermo SpA Use of sodium chromate as an anticorrosion agent of the carbon steel in sealed circuit of gas absorption appliances up to 0.70% by weight (as Cr6+) in the refrigerant solution Commission decided Details
0028-01 Initial Lead chromate 231-846-0 7758-97-6 Etienne LACROIX Industrial use of lead chromate in manufacture of pyrotechnical delay devices contained into ammunition for naval self-protection Commission decided Details
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided Details
0235-01 Initial Chromic acid 231-801-5 7738-94-5 Neoperl GmbH The use of chromic acid in the functional electroplating of brass-made sanitary articles with the specific purpose of obtaining a final Cr(0) coating that provides a surface with high durability and chemical resistance. Opinions adopted Details
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired Details
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired Details
0012-01 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided Details
0012-05 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired Details
0012-09 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use Commission decided Details
0012-11 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired Details
0012-03 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided Details
0012-07 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided Details
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 Airbus Helicopters Technik GmbH [name of applicant in the original application: “ZF Luftfahrttechnik GmbH” updated due to a notified corporate name change] Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided Details
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted Details
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD – [Decision discontinued as of 01/01/2021]
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided Details
0300-01 Initial Chromium trioxide 215-607-8 1333-82-0 WEBER-HYDRAULIK GMBH Chromium trioxide-based functional chrome plating of solid and hollow piston rods for hydraulic applications Opinions adopted Details
0336-01 Review report Chromium trioxide 215-607-8 1333-82-0 CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7) Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0032-06 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Passivation of tin-plated steel (ETP) Commission decided Details
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd – [Decision discontinued as of 01/01/2021] Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Discontinued as of 01 January 2021 Details
0345-02 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Passivation of stainless steel using chromium trioxide or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0280-02 Initial Chromium trioxide 215-607-8 1333-82-0 TECNOCROM INDUSTRIAL, S.A.;ALLION ESPAÑOLA S.A.; CROMADO INDUSTRIAL SARRASIN S.L.; CROMECAL, S.L. ; Talleres Acro, S. L. [name of the applicant in the original application: Talleres Acro, S.A. updated due to a change of corporate name]; DUROKROM, SL; IkanKronitek, S.L.; CROMO DURO ANFER S.A.; GIROCLAD, SL; OVIDICROM S.L.; RECTIFICADOS DELVAL S.A; REQUEL S.L.; Talleres Durocrom S. L.; TALLERES GUMILA, S.L. Functional chrome plating of parts with complex surface geometry and requiring the use of an auxiliary anode Opinions adopted Details
0288-01 Initial Chromium trioxide 215-607-8 1333-82-0 Leonardo S.p.A. Functional chrome plating of military gun barrels and outer jacket surfaces using chromium trioxide Opinions adopted Details
0309-01 Initial Chromium trioxide 215-607-8 1333-82-0 Cromatura Staff Srl Industrial use of chromium trioxide for the plating of brass valves destined for applications involving industrial and technical fluids and brass fittings for oxygen cylinders Opinions adopted Details
0291-01 Initial Chromium trioxide 215-607-8 1333-82-0 BELLONI S.a.s. DI BELLONI ADRIANO & C. Industrial use of chromium trioxide for the plating of coffee machine parts in contact with water and food Opinions adopted Details
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided Details
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 Airbus Helicopters Technik GmbH [name of applicant in the original application: “ZF Luftfahrttechnik GmbH” updated due to a notified corporate name change] Functional chrome plating Commission decided Details
0281-01 Initial Chromium trioxide 215-607-8 1333-82-0 ELECTRO-DUROCROM.S.L Industrial use of chromium trioxide for the hard chromium plating of moulds, dies and custom-made finished parts on any metal base, in order to provide hardness, wear resistance, corrosion resistance, demoulding properties, low friction ratio, for the manufacture of high-quality metal parts in several sectors as automotive, pharmaceutical, food and packaging industries Opinions adopted Details
0283-01 Initial Chromium trioxide 215-607-8 1333-82-0 KYB SUSPENSIONS EUROPE, S.A.U.; KYB Manufacturing Czech s.r.o. Functional chrome plating of piston rods for shock absorbers for automotive applications Opinions adopted Details
0333-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Pre-treatments: Deoxidising, pickling, etching and/or desmutting using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details