Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 232-476-2
CAS number: 8050-15-5
Calculated BCF values for rosin esters range from 554.8 to 8053 L/kg for mono-esters and 3.82 to 137.2 L/kg for di-esters; the BCF for tri-esters and tetra-esters is 3.162. Measured BCF values for resin acids range from <25 to 130.
substances are poorly soluble UVCBs and as such conducting a BCF study
would be very complex. No measured bioaccumulation data is available for
rosin ester substances. Measured Kow values are available for rosin
ester substances, however results are variable due to the difficulties
with testing these substances, with log Kow values ranging from 2.44 to
> 6.5. Due to the difficulties with measuring Kow for these substances
and the fact that a single measured Kow is unlikely to be representative
of the constituents in the UVCB, bioaccumulation potential is assessed
based on QSAR predictions for representative structures in the UVCB
substances are UVCB substances containing rosin ester and non-esterified
resin acid constituents. The bioaccumulation potential of the substances
is therefore assessed based on a QSAR screening assessment of rosin
ester constitiuents and measured data for resin acids.
was estimated for representative structures of mono, di, tri and tetra
ester substances using the US EPA's EPISuite model BCF
BAF (regression-based method). Calculated
BCF values for rosin ester constituents range from 554.8 to 8053 L/kg
for mono-esters and 3.82 to 137.2 L/kg for di-esters; the BCF for
tri-esters and tetra-esters is 3.162. Calculated BAF values for rosin
substances range from 131.2833 to 2319.69 L/kg for mono-esters, 21.8399
to 1450.283 L/kg for di-esters and 0.893 to 0.9041 L/kg for tri-esters;
the BAF for tetra-esters is 0.893.
The applicability domain of the BCFBAF model
is based on the molecular weight and log Kow of 527 training set
compounds (minimum MW: 68.08, maximum MW: 959.17, average MW: 244,
minimum log Kow: 1.37, maximum log Kow: 11.26). According to the
training set molecular weight range and log Kow range, di-, tri- and
tetra-esters are outside of the BCF model domain.
Although some of these constituents are
outside the domain of the QSAR model, the QSAR approach is considered to
be appropriate as a screening assessment in order to identify any
constituents that may require further assessment. Measured BCF values
are available for resin acid constituents (Niimi and Lee 1992). Rainbow
trout (Oncorhynchus mykiss) were exposed to nine resin acids that
included abietic, dehydroabietic, chlorodehydroabietic,
dichlorodehydroabietic, neoabietic, pimaric, isopimarie,
sandaracopimaric, and palustric acids for 20 days, followed by a 10 day
depuration period. BCF values for resin acids were determined to range
from <25 to 130.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Šajā tīmekļa vietnē tiek izmantoti sīkfaili, lai nodrošinātu Jums vislabāko lietojumu mūsu tīmekļa vietnēs.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again