Registration Dossier

Administrative data

First-aid measures

Skin contact: Wash off with plenty of water. Suitable emergency safety shower facility should be available in work area.
Eye contact: Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.
Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.

Fire-fighting measures

Suitable extinguishing media: Water spray Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical
Hazardous combustion products: Silicon oxides Formaldehyde Carbon oxides
Unusual Fire and Explosion Hazards: Exposure to combustion products may be a hazard to health.
Fire Fighting Procedures: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area. Special protective equipment for firefighters: Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Follow safe handling advice and personal protective equipment recommendations.
Environmental precautions: Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g. by containment or oil barriers). Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.
When release; Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbant. Local or national regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which regulations are applicable. For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, Sections 13 and 15 of this SDS provide information regarding certain local or national requirements.

Handling and storage

Take care to prevent spills, waste and minimize release to the environment. Handle in accordance with good industrial hygiene and safety practice.
Use only with adequate ventilation.
Keep in properly labelled containers. Store in accordance with the particular national regulations.
Do not store with strong oxidizing agents.

Transport information

Land transport (ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
Class:
Not applicable
Classification code:
NA
Packaging group:
Not applicable
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Class:
Not applicable
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable
Proper shipping name and description:
Not regulated
Class:
NA
Packaging group:
NA
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable
Proper shipping name and description:
Not regulated or IATA
Packaging group:
NA
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task. No respiratory protection are required

Stability and reactivity

Stable under normal conditions

Disposal considerations

Do not dump into any sewers, on the ground, or into any body of water. This product, when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC. Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste. For used, contaminated and residual materials additional evaluations may be required.

The definitive assignment of this material to the appropriate EWC group and thus its proper EWC code will depend on the use that is made of this material. Contact the authorized waste disposal services.