Registration Dossier

Administrative data

Endpoint:
flash point of flammable liquids
Data waiving:
study technically not feasible
Justification for data waiving:
the study does not need to be conducted because the flash point is only relevant to liquids and low melting point solids
Justification for type of information:
JUSTIFICATION FOR DATA WAIVING
The melting point of the substance was determined in DSC experiments to be 121.4°C, thus the substance is not a low melting point solid.
Cross-reference
Reason / purpose:
data waiving: supporting information
Reference
Endpoint:
melting point/freezing point
Type of information:
experimental study
Adequacy of study:
key study
Study period:
22 January 2018 - 02 August 2018
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
EU Method A.1 (Melting / Freezing Temperature)
Version / remarks:
2016
Deviations:
no
Qualifier:
according to
Guideline:
OECD Guideline 102 (Melting point / Melting Range)
Version / remarks:
1995
Deviations:
no
Qualifier:
according to
Guideline:
EPA OPPTS 830.7200 (Melting Point / Melting Range)
Version / remarks:
1998
Deviations:
no
GLP compliance:
yes
Type of method:
differential scanning calorimetry
Key result
Melting / freezing pt.:
121.4 °C
Atm. press.:
1 013.25 hPa
Decomposition:
yes
Decomp. temp.:
275 °C
Remarks on result:
other: Decomposition started after melting.

Two experiments were performed to investigate the melting (and boiling) behaviour of the substance.

 

DSC EXPERIMENT 1

An endothermic peak was observed between 100°C and 150°C followed by another endothermic effect starting at ca. 275°C. The extrapolated onset temperature of the peak was 121.715°C. This endothermic effect was most likely caused by melting of the test item. The second endothermic effect was probably due to reaction and/or decomposition of the test item.

After the experiment, a yellow molten residue remained in the sample container. The change of the colour indicated reaction and/or decomposition of the test item. Based on this visual observation, it was concluded that the test item had molten and that the change of the colour demonstrated reaction and/or decomposition of the test item.

 

DSC EXPERIMENT 2

In order to investigate the melting peak, in Experiment 2 heating was stopped directly after the melting peak. The extrapolated onset temperature was 121.102°C. 

After the experiment, a white molten residue remained in the sample container. It demonstrated that melting was the reason for the endothermic effect.

 

DATA HANDLING

The melting temperature was determined as the mean melting temperature of Experiment 1 (121.715°C) and Experiment 2 (121.102°C).

 

TGA and DSC curve recorded during heating: see Illustration

Conclusions:
The melting temperature of the substance was determined to be 121.4°C.

Executive summary:

Differential Scanning Calorimetry (DSC) experiments were performed in a GLP study according to EC A.1, OECD 102 and OPPTS 830.7200.

The melting temperature of the substance was determined in duplicate obtaining a mean value of 121.4°C.

Reaction and/or decomposition of the substance was observed at temperatures > 275°C.

Data source

Materials and methods

Results and discussion

Applicant's summary and conclusion