Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 941-167-8 | CAS number: 1584709-99-8
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2014-01-28
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- The study was conducted according to OECD/EU guideline, and under GLP. No deviation was reported. Test substance is adequately specified with purity. Therefore full validation applies.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Deviations:
- no
- Principles of method if other than guideline:
- Not applicable
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- inspected on June 3 to 5, 2013 / signed on November 5, 2013
- Type of method:
- pycnometer method
- Dynamic viscosity of test material:
- no data
- Key result
- Type:
- relative density
- Density:
- 0.949
- Temp.:
- 20 °C
- Type:
- density
- Density:
- 0.949 g/cm³
- Temp.:
- 20 °C
- Conclusions:
- The substance is less dense than water.
- Executive summary:
The relative density of the test substance was measured under GLP according OECD 109 / EU A3 guideline, pycnometer method. The sample was measured in triplicate at 20 °C, and the mean relative density was calculated.
The relative density D20 4 of the test substance has been determined to be 0.9491.
Reference
Table 4.4/1: Density of the Test Item
Replicate |
No. 1 |
No. 2 |
No. 3 |
VP |
25.1606 |
25.2173 |
24.9656 |
mP |
20.4629 |
20.7439 |
20.2979 |
mPTI |
44.3430 |
44.6714 |
43.9995 |
TP |
20.0 |
20.0 |
20.0 |
pTI |
0.9491 |
0.9489 |
0.9494 |
Mean value (g/cm3) |
0.9491 |
CV (%) |
0.02 |
VP = Volume of the calibrated pycnometer [cm3]
mp = Mass of the empty pycnometer [g]
mPTI = Mass of the pycnometer filled with test item [g]
TP = Temperature of the pycnometer at point of measurement [C]
pTI = Density of the test item [g/cm3]
CV = Coefficient of variation [%]
The relative density D20 4 of the test item was calculated to be 0.9491.
Validity Criteria
The temperatures at moments of weighing were kept constant within 20.0 ± 0.1 °C.
The coefficient of variation of the three replicate measurements was < 2 %. No outlier was ascertained.
Description of key information
The substance is less dense than water.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.949
Additional information
A fully reliable experimental study, conducted according to a recognized OECD/EU method and under GLP, is available. It is considered as a key study. The result is retained as key data.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
