Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
If inhaled: Move to fresh air.
In case of skin contact: Rinse immediately with plenty of water and rinse thoroughly.
In case of eye contact: Rinse opened eye for several minutes under running water and seek medical
advice.
If swallowed: Immediately give large quantities of water to drink. Consult a physician.
Indication of any immediate medical attention and special treatment needed
Symptoms:
Causes serious eye irritation.
Hazards:
No information available.
Treatment:
No information available.





Fire-fighting measures

Extinguishing media
Suitable extinguishing media: Foam. Dry powder. Carbon dioxide (CO2). Water spray jet.
Unsuitable extinguishing media: High volume water jet.
Special hazards arising from the substance or mixture
Hazardous combustion products: Nitrogen oxides (NOx). Carbon monoxide.
Advice for firefighters
Self-contained breathing apparatus (EN 133).
Additional advice:
The product itself does not burn. Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Environmental precautions
Do not flush into surface water or sanitary sewer system.
Methods and materials for containment and cleaning up
Use mechanical handling equipment. Put into suitable containers and take for recycling or disposal. Dispose of
recovered material according to the regulations.

Handling and storage

Precautions for safe handling
Specific requirements or handling rules: Keep container tightly closed in a dry and well-ventilated place. Tightly
seal any begun barrels after use. Limit the inventory of substances at the workplace to the amount required for
continued operations. The danger areas must be delimited and identified using relevant warning and safety signs.
Floors, walls and other surfaces must be regularly cleaned. Use approved industrial vacuum cleaners (of the H
class) for cleaning only.
Fire prevention measures: Keep away from heat and sources of ignition.
Environmental precautions: Positively avoid ingress into the soil. Observe and comply with any legislation
governing the storage or use of water-hazardous substances.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers: Provide sufficient air exchange and/or exhaust in work rooms.
Route exhaust air into the open air via appropriate separators or scrubbers only. Positively avoid ingress into the
soil. Observe and comply with any legislation governing the storage or use of water-hazardous substances. Keep
and store locked up, with access only for competent personnel. Store, handle or transport in tightly sealed, clearly
and visibly marked containers only.
German storage class: 6.1D - Non-combustible, acute toxic or hazardous materials causing chronic effects

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not classified
Not dangerous goods in the meaning of ADR/RID, ADNR, IMDG-Code, ICAO/IATA-DGR
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not classified
Not dangerous goods in the meaning of ADR/RID, ADNR, IMDG-Code, ICAO/IATA-DGR
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not classified
Not dangerous goods in the meaning of ADR/RID, ADNR, IMDG-Code, ICAO/IATA-DGR
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not classified
Not dangerous goods in the meaning of ADR/RID, ADNR, IMDG-Code, ICAO/IATA-DGR
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Exposure limit(s): none
Biological occupational exposure limits: none
Exposure controls
Engineering measures:
Design all manufacturing processes such that inhalation of the substance as well as skin or eye contact will be
prevented. Use sealed devices for refilling, metering or sampling wherever possible. Extract any dust immediately
at the point of origin when handling open systems. Keep the number of people working in the affected areas as low
as possible.
Personal protective equipment:
Eye/face protection: Tightly fitting safety goggles.
Hand protection:
Glove material: Nitrile rubber
Ensure that the type of material and the quality of the body protective equipment correspond with the recommendations
of the producer for your particular type of work.
Skin and body protection: Light protective clothing.
Hygiene measures: When using do not eat, drink or smoke. Take off all contaminated clothing
immediately. Wash hands before breaks and at the end of workday.
Respiratory protection: Not required.
General protective measures:
No special protective equipment required.

Stability and reactivity

Chemical stability
Heating can release hazardous gases.
Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
Keep away from heat and sources of ignition.

Disposal considerations

Waste treatment methods
Waste from residues:
In accordance with the waste recycling/disposal regulations, has to be taken to an approved waste disposal facility.
The classification of the waste has to be made according to its source in accordance with the European waste code
regulations.
Contaminated packaging:
Disposal according to the regulations, contaminated packaging has to be treated in the same way as the substance
itself. Packaging should be completely emptied, and then taken to an approved recycler after appropriate cleaning.
Recommended cleaning agent: Water