Registration Dossier

Administrative data

First-aid measures

Eyes: In case of contact, immediately flush eyes with plenty of water for a t least 15 minutes. Get medical aid.
Skin: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid immediately. Wash clothing before reuse.
Ingestion: If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician: For methemoglobinemia, administer oxygen alone or with Methylene Blue
depending on the methemoglobin concentration in the blood.

Fire-fighting measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid and vapor. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas.
Extinguishing Media: Water may be ineffective. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Flash Point: 77 deg C
Autoignition Temperature: 490 deg C ( 932.00 deg F)
Explosion Limits, Lower:N/A
Upper: N/A
NFPA Rating: (estimated) Health: 2; Flammability: 2; Instability: 0

Accidental release measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Handling and storage

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Use only with adequate ventilation. Keep away from heat and flame.
Storage: Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Isolate from oxidizing materials and acids.

Transport information

Land transport (ADR/RID)

UN number:
2294
Proper shipping name and description:
N-METHYLANILINE
Class:
6.1
Packaging group:
III
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Chemical name: N-methylaniline
ACGIH: 0.5 ppm TWA; Skin -potential significant contribution to overall exposure by the cutaneous route
NiOSH: 0.5 ppm TWA; 2 mg/m3 TWA 100 ppm IDLH
OSHA - Final PELs: 2 ppm TWA; 9 mg/m3 TWA OSHA Vacated
OSHA Vacated PELs: N-Methylaniline: 0.5 ppm TWA; 2 mg/m3 TWA

Personal Protective Equipment
Eyes: Wear chemical splash goggles.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced

Stability and reactivity

Chemical Stability: Stable under normal temperatures and pressures. Substance undergoes color change upon exposure to air. Turns reddish-brown on exposure to light.
Conditions to Avoid: Ignition sources, excess heat, prolonged exposure to air.
Incompatibilities with Other Materials: Strong oxidizing agents, acids, acid chlorides, acid anhydrides.
Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Disposal considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.