Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 258-380-0 | CAS number: 53126-67-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
pH
Administrative data
- Endpoint:
- pH
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-12-15
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
Cross-reference
- Reason / purpose for cross-reference:
- reference to same study
Reference
- Endpoint:
- water solubility
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2017-12-15
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Qualifier:
- according to guideline
- Guideline:
- other: ISO 304:1985: Surface active agents -- Determination of surface tension by drawing up liquid films
- Principles of method if other than guideline:
- The surface tension of a solution of surfactant generally decreases with increasing concentration until the CMC is achieved. At higher concentration, the surface tension remains essentially unchanged. In a graph of the surface tension as a function of concentration, points form normally two straight lines with different slopes. The CMC is given by the intersection of the two straight lines.
- GLP compliance:
- no
- Type of method:
- other: critical micelle concentration (CMC)
- Key result
- Water solubility:
- 0.061 g/L
- Conc. based on:
- test mat.
- Incubation duration:
- 15 min
- Temp.:
- 20 °C
- pH:
- 6.73
- Remarks on result:
- other: Critical micelle concentration
- Details on results:
- Three independent measurements were performed. From each experiment the curves for the two straight lines were determined. The individual results differ by 15.8 % and thus were regarded as acceptable.
- Conclusions:
- The critical micelle concentration was determined to be 0.061 ± 0.0097 g/L at 20 °C.
- Executive summary:
A study was conducted to determine critical micelle concentration (CMC) of the test item in water. The substance is a surfactant and thus the determination of the water solubility was technically not feasible. Upon reaching CMC, any further addition of test item will just increase the number of micelles. Below the CMC concentration the test item only individual surfactant molecules are present. Using the plate method to determine the surface tension, three individual experiments were performed to determined the surface tension as a function of the test item concentration. The functions of the two curves above and below the CMC were determined and the CMC was determined by the intersection of the two straight lines. The CMC was determined to be 0.061 ± 0.0097 g/L at 20 °C in water.
Experiment 1
Concentration (g/L) |
0.00187 |
0.00367 |
0.00487 |
0.00857 |
0.01543 |
0.22120 |
0.49600 |
1.08900 |
2.02600 |
Surfacetension (mN/m) |
70.0 |
63.2 |
56.8 |
48.0 |
48.2 |
31.4 |
32.1 |
32.4 |
31.9 |
Experiment 2
Concentration (g/L) |
0.00092 |
0.00238 |
0.00352 |
0.00711 |
0.0087 |
0.03045 |
0.23343 |
0.5220 |
0.5950 |
1.9310 |
Surfacetension (mN/m) |
71.0 |
58.0 |
53.1 |
52.9 |
44.0 |
41.9 |
31.6 |
31.8 |
32.0 |
31.9 |
Experiment 3
Concentration (g/L) |
0.00093 |
0.00205 |
0.00378 |
0.00525 |
0.00984 |
0.01596 |
0.07024 |
0.09314 |
0.469 |
1.101 |
2.051 |
Surface tension (mN/m) |
70.2 |
66.5 |
61.1 |
52.8 |
50.5 |
44.4 |
34.3 |
31.1 |
32.2 |
31.8 |
32.1 |
curves of the surface tension as a function of the concentration of the test item in water
Curve |
Straight line 1 |
Straight line 2 |
CMC (g/L) |
Average |
Standard deviation |
1 |
y = -11.37 ln(x) -2.2107 |
y = 0.2626 ln(x) +32.043 |
0.053 |
0.061 |
0.0097 |
2 |
y = -8.185 ln(x) + 10.006 |
y = 0.1328 ln(x) +31.89 |
0.072 |
||
3 |
y = -9.433 ln(x) + 6.086 |
y = 0.292 ln(x) + 32.01 |
0.059 |
Data source
Materials and methods
Test guideline
- Qualifier:
- no guideline followed
- GLP compliance:
- no
Reagents
- Reagent:
- water
Results and discussion
pH value
- Key result
- pH value:
- 6.73
- Temp.:
- 20 °C
- Concentration:
- 1 g/L
Applicant's summary and conclusion
- Conclusions:
- The pH vale of the test item was determined to be 6.73 at 20°C and 1 g/L.
- Executive summary:
A study was conducted to determine the pH value of the test item. Using a pH-Meter the pH-value of the test item was determined to be 6.73 at 20 °C and 1 g/L.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.