Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice

Remove contaminated, soaked clothing immediately and dispose of safely. First aider needs to protect himself.  

Inhalation

Keep at rest. Aerate with fresh air. When symptoms persist or in all cases of doubt seek medical advice.  

Eyes

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses. Obtain medical attention.  

Skin

Wash off immediately with soap and plenty of water. When symptoms persist or in all cases of doubt seek medical advice.  

Ingestion

Do not induce vomiting without medical advice. Call a physician immediately.  

Main symptoms

shortness of breath.  

Special hazard

Lung oedema.  

Notes to physician

Treat symptomatically. In case of lung irritation, first treatment with cortisone spray.  

Fire-fighting measures

Suitable extinguishing media

alcohol-resistant foam, dry chemical, carbon dioxide (CO2), water spray

Extinguishing media which must not be used for safety reasons

Do not use a solid water stream as it may scatter and spread fire.  

Special exposure hazards arising from the substance or preparation itself, its combustion products, or released gases

Under conditions giving incomplete combustion, hazardous gases produced may consist of:

carbon monoxide (CO)

carbon dioxide (CO2)

Combustion gases of organic materials must in principle be graded as inhalation poisons

Vapours are heavier than air and may spread along floors

Special protective equipment for fire-fighters

Fire fighter protection should include a self-contained breathing apparatus (NIOSH-approved or EN 133) and full fire-fighting turn out gear.  

Precautions for fire-fighting

Cool containers / tanks with water spray. Dike and collect water used to fight fire. Water run-off can cause environmental damage. Keep people away from and upwind of fire.  

Accidental release measures

Personal precautions

Avoid contact with skin and eyes. Avoid breathing vapors or mists. Keep people away from and upwind of spill/leak. Ensure adequate ventilation, especially in confined areas. Keep away from heat and sources of ignition.

For emergency responders: Personal protection see section 8.  

Environmental precautions

Prevent further leakage or spillage. Do not discharge product into the aquatic environment without pretreatment (biological treatment plant). Water runoff can cause environmental damage.  

Methods for containment

Stop the flow of material, if possible without risk. Dike spilled material, where this is possible.  

Methods for cleaning up

Soak up with inert absorbent material. DO NOT use combustible materials such as sawdust. Keep in suitable, closed containers for disposal. If liquid has been spilt in large quantities clean up promptly by scoop or vacuum. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours).

Handling and storage

Handling  

Advice on safe handling

Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Provide sufficient air exchange and/or exhaust in work rooms. Refill and handle product only in closed system.  

Advice on protection against fire and explosion

Keep away from sources of ignition - No smoking. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). In case of fire, emergency cooling with water spray should be available. Ground and bond containers when transferring material.  

Advice on the protection of the environment

See Section 8: Environmental exposure controls.  

Storage  

Technical measures/Storage conditions

Keep containers tightly closed in a cool, well-ventilated place. Handle and open container with care. Handle under nitrogen, protect from moisture.  

Advice on common storage

Incompatible products:

acids and bases

amines

oxidizing agents

Temperature class

T4

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3082
Shippingopen allclose all
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
class 9 plus fish and tree
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
ADNR-Container: not restricted
ADNR-Tanker: ID 9006
Shipping information
Proper shipping name and description:
Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
n-Undecanal
Language:
English
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
class 9 plus fish and tree
Special provisions / remarks
Remarks:
ADNR-Container: not restricted
ADNR-Tanker: +N3, F

Marine transport (UN RTDG/IMDG)

UN number:
UN 3082
Shippingopen allclose all
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3082
Shippingopen allclose all
Class or division:
Class 9: Miscellaneous dangerous substances and articles, including environmentally hazardous substances
Packing group:
Packing group III: Substances presenting low danger
Labels:
class 9 plus fish and tree
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure controls

 

Engineering measures

General or dilution ventilation is frequently insufficient as the sole means of controlling employee exposure. Local ventilation is usually preferred. Explosion-proof equipment (for example fans, switches, and grounded ducts) should be used in mechanical ventilation systems.  

Personal protective equipment  

General industrial hygiene practice

Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Ensure that eyewash stations and safety showers are close to the workstation location.  

Hygiene measures

When using, do not eat, drink or smoke. Take off all contaminated clothing immediately. Wash hands before breaks and immediately after handling the product.  

Hand protection

Wear protective gloves. Recommendations are listed below. Other protective material may be used, depending on the situation, if adequate degradation and permeation data is available. If other chemicals are used in conjunction with this chemical, material selection should be based on protection for all chemicals present.  

 Suitable material nitrile rubber

 Reference substance n/i-Undecanal

 Evaluation according to EN 374: level 6

 Glove thickness approx 0,55 mm

 Break through time > 480 min

 

Suitable material

Viton

 Reference substance n/i-Undecanal

 Evaluation according to EN 374: level 6

 Glove thickness approx 0,5 mm

 Break through time > 480 min

 

Eye protection

Tightly fitting safety goggles. In addition to goggles, wear a face shield if there is a reasonable chance for splash to the face. Equipment should conform to EN 166.  

Skin and body protection

Impervious clothing. Wear face-shield and protective suit for abnormal processing problems.  

Environmental exposure controls

If possible use in closed systems. If leakage can not be prevented, the substance needs to be suck off at the emersion point, if possible without danger. Observe the exposure limits, clean exhaust air if needed. If recycling is not practicable, dispose of in compliance with local regulations. Inform the responsible authorities in case of leakage into the atmosphere, or of entry into waterways, soil or drains.  

Stability and reactivity

Stability

Stable under recommended storage conditions.  

Hazardous reactions

Hazardous polymerisation may occur. Polymerization is a highly exothermic reaction and may generate sufficient heat to cause thermal decomposition and/or rupture containers. When finely distributed, self-ignition is possible. May form explosive peroxides.  

Conditions to avoid

Avoid contact with heat, sparks, open flame, and static discharge. Avoid any source of ignition.  

Materials to avoid

bases, amines, acids, oxidizing agents.  

Disposal considerations

Product Information

Disposal required in compliance with all waste management related state and local regulations. The choice of the appropriate method of disposal depends on the product composition by the time of disposal as well as the local statutes and possibilities for disposal. Hazardous waste according to European Waste Catalogue (EWC).  

Uncleaned empty packaging

Contaminated packaging should be emptied as far as possible and after appropriate cleansing may be taken for reuse.