Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 948-264-4 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2018-01-16 to 2018-04-06
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Version / remarks:
- adopted 28 July 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Qualifier:
- according to guideline
- Guideline:
- other: ECVAM international validation study on in vitro tests for acute skin irritation (Altern Lab Anim. 2007 Dec; 35 (6):559-601)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- signed 27 April 2017
Test material
- Reference substance name:
- Complexation products of bismuth(3+) neodecanoate with propane-1,2-diol, propoxylated and 2,2',2'',2'''-ethylenedinitrilotetraethanol
- EC Number:
- 948-264-4
- IUPAC Name:
- Complexation products of bismuth(3+) neodecanoate with propane-1,2-diol, propoxylated and 2,2',2'',2'''-ethylenedinitrilotetraethanol
- Test material form:
- liquid
Constituent 1
In vitro test system
- Test system:
- human skin model
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- The 0.5 cm² reconstructed epidermises (Episkin SA, RHE/S/17 - batch n° 18-RHE-006) were received on 30 January 2018. The same day, the insert (filter + epidermis) was gently removed from the agarose while avoiding leaving agarose on the polycarbonate filter. The inserts were placed in a 6 wells culture plate which had been previously filled with 1 mL of growth medium (EpiSkin SA, batch n° 18 SGM 007) during 2 hours and 34 minutes. Then just before treatment, the inserts were placed in 24 wells culture plate whic had been previously filled with 300 µL of maintenance medium (EpiSkin, batch n° 18 SMM 004).
- Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- The test item was applied at the dose of 16 µL to the epidermal surface of 3 living skin models during 42 minutes at room temperature. To ensure good contact with the epidermises, during all the treatment period, the test item was recovered with a nylon mesh provided by Episkin SA.
In the same experimental conditions, a positive control (5% SDS), and a negative control ( DPBS -Dutscher - batch n°3149117) were carried out. The 5% SDS solution was prepared by weighing 0.5 g of SDS (SIGMA - batch n° STBG6142V) in a 10 mL volumetric flask qsp 10 mL of distilled water. Then, the preparation was magnetically stirred, just before the treatment. To ensure good contact with the epidermises, during all the treatment period, the control items were recovered with a nylon mesh provided by Episkin SA. - Duration of treatment / exposure:
- 42 minutes
- Duration of post-treatment incubation (if applicable):
- 42 hours
- Number of replicates:
- 3 living skin models
Test system
- Vehicle:
- unchanged (no vehicle)
- Details on study design:
- 42 minutes after the test item application, the nylon mesh was removed and the human epidermises were washed with 25 x 1 mL of DPBS (Dutscher - batch n° 3149117). The rinsed tissues were checked for any coloration and noted to be whitish, comparable comparison to that of the negative control tissues.
They were incubated for 42 hours post-treatment incubation period in fresh medium between 36.1°c and 38.0°C, 5% CO2. Then, the epidermises were put in contact with the MTT solution.
The cell viability was quantified by measurement of the cell succinate dehydrogenase activity. This enzyme was responsible for the MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, Thiazol blue; CAS n° 298-93-1)] reduction into blue formazan crystal that is quantitatively measured by Optical Density (OD) after extraction of tissues.
The skin samples were placed in 300 µL of a MTT solution at 1.0 mg/L for 3 hours between 37.0°C and 38.0°C, 5% CO2.
The precipitated blue formazan product was then extracted using isopropanol during 2 hours under gentle agitation in the dark, and the concentration of formazan was measured by determining the OD at 570 nm, just after dilution of the extracts 1:2 in isopropanol.
The OD was measured in triplicate of MTT extract.
The measurement of OD at 570 nm of formazan was performed in triplicate samples using the ELx800 absorbance microplte reader (controlled every year and calibrated if necessary) supplied by BioTek and the validated software Gen5 ELISA V1.05.11 supplied by BioTek.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- % tissue viability
- Value:
- 44.3
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks:
- mean viability (%) = 1.6 (5% Sodium dodecyl sulfate)
- Other effects / acceptance of results:
- The results were expressed as a viability percentage compared with the negative control:
% viability = ODtest item / OD negative control * 100
Any other information on results incl. tables
Results after treatment with test item and the controls
Dose group |
Treatment |
Mean OD
|
Mean OD
|
Mean OD Skin 3*
|
Mean OD Product
|
Mean Viability % |
Negative control |
42 min |
0.680 |
0.742 |
0.703 |
0.708 |
100.0 |
Positive control |
42 min |
0.013 |
0.010 |
0.010 |
0.011 |
1.6 |
Test item |
42 min |
0.228 |
0.377 |
0.337 |
0.314 |
44.3 |
OD = Optical Density
EVALUATION AND INTERPRETATION OF THE RESULTS
The OD values obtained for each test sample are used to calculate a percentage of viability relative to the negative control, which was arbitrarely set at 100%. The cut-off value of percentage cell viability distinguishing irritant from non-classified test items associated with the SkinEthic RHE model is given below:
- The test item is considered as non-irritant to skin in accordance with UN GHS No Category: if the mean percent viability after 42 minutes of exposure and 42 hours of post-treatment incubation is > 50%.
- The test item is identified as requiring classification and labelling according to UN GHS (Category 2): if the mean percent viability after 42 minutes of exposure and 42 hours of post-treatment incubation is ≤ 50% and the result of a skin corrosion test is 'non-corrosive'. In accordance with the Regulation EC n° 1272/2008 and with a classification non-corrosive on a skin corrosion test, the test item has to be classified in Category 2 'Irritant'. The corresponding hazard statement is 'H315: Causes skin irritation' with the signal word 'Warning'.
- The test item is identified as requiring classification and labelling according to UN GHS (Category 2 or Category 1): if the mean percent viability after 42 minutes of exposure and 42 hours of post-treatment incubation is ≤ 50% and in absence of information on a skin corrosion test. In accordance with the Regulation EC n° 1272/2008 and in absence of information on a skin corrosion test, the test item has to be classified in Category 2 'Irritant' or in Category 1 'Corrosive'. The corresponding hazard statement is respectively 'H315: Causes skin irritation' with the signal word 'Warning' or 'H314: Causes severe skin burns and eye damage' with the signal word 'Danger'.
Applicant's summary and conclusion
- Interpretation of results:
- Category 2 (irritant) based on GHS criteria
- Conclusions:
- In accordance with the Regulation EC n° 1272/2008 and considering the results obtained during the in vitro skin corrosion study (study n° HSMC-PH-17/0679, test item classified as non corrosive), the test item has to be classified in Category 2 'Irritating to skin'. The hazard statement 'H315: Causes skin irritation' with the signal word 'Warning' are required.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.