Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 204-881-4
CAS number: 128-37-0
The vapour pressure of the test substance was measured over the
temperature range 300 to 334 K (27 to 61 ºC) using the gas saturation
method. The vapour pressure of 2,6-di-tert-butyl-4-methylphenol at 298 K
obtained by the gas saturation method was 0.39 N/m2.
Based on the experimental results from the study report (key study), the
vapour pressure at 24.85 ºC is 0.39 N/m2 (0.39 Pa).
Based on the experimental results from the scientific article, the
vapour pressure is 0.0047 mmg Hg (0.63 Pa).
Based on the estimated data using EPI-Suite, the vapour pressure is
0.00177 at 25 ºC (0.24 Pa).
Key study: Experimental result from a study report:
the vapour pressure at 24.85 ºC is 0.39 N/m2 (0.39 Pa).
Supporting studies: experimetal results from one scientific
article and estimated data using EPI-Suite (EPA, USA).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Siekdami užtikrinti, kad būtų patogu naudotis mūsų svetaine, jos tinklapiuose naudojame slapukus.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again