Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 263-005-9 | CAS number: 61788-78-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Based on the results from the in vitro and read across in vivo irritation studies, the test substance is considered to be corrosive to skin as well as eyes.
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vivo
- Type of information:
- read-across based on grouping of substances (category approach)
- Adequacy of study:
- key study
- Study period:
- 1982
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- comparable to guideline study with acceptable restrictions
- Justification for type of information:
- Refer to the Quaternary ammonium salts (QAS) category or section 13 of IUCLID for details on the category justification.
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- OECD Guideline 404 (Acute Dermal Irritation / Corrosion)
- GLP compliance:
- not specified
- Species:
- rabbit
- Strain:
- New Zealand White
- Type of coverage:
- occlusive
- Preparation of test site:
- other: intact and abraded
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent no treatment
- Amount / concentration applied:
- 0.5 mL of undiluted test substance (50% pure)
- Duration of treatment / exposure:
- 4 or 1 h
- Observation period:
- 4 or 1 hour, 48 h and 10 days
- Number of animals:
- Six males and females
- Details on study design:
- Six healthy adult New Zealand White albino rabbits (M/F) were used for the test. 24 hours prior to applying the test substance, the hair was removed from the back of the animals with electric clippers in such a way as to avoid abrasions.
An amount of 0.5 mL of the undiluted test substance was brought on the intact skin under a surgical patch measuring 1 x 1 inch. The patches were fixed to the application site by means of adhesive tape and the entire trunk of the rabbits was wrapped with an impervious material to maintain the test patches in position and to retard evaporation of volatile substances.
Each rabbit was treated on the intact skin. The abrasions were minor incisions through the stratum corneum, but not sufficiently deep to disturb the derma or to produce bleeding.
After an exposure period of 4 or 1 hour the patches and the test substance applied were removed and the resulting skin reactions were evaluated by the method of Draize scoring. A second reading was made 48 hours later. - Irritation parameter:
- overall irritation score
- Basis:
- mean
- Time point:
- other: 1 h
- Score:
- 0.85
- Max. score:
- 8
- Reversibility:
- fully reversible within: 10 days
- Remarks on result:
- other: Study II, following exposure period of 1 hour
- Irritation parameter:
- overall irritation score
- Basis:
- mean
- Time point:
- other: 4 h
- Score:
- 4
- Max. score:
- 8
- Reversibility:
- not reversible
- Remarks:
- within 10 days
- Remarks on result:
- other: Study I, following exposure period of 4 hours
- Irritation parameter:
- erythema score
- Remarks:
- 4 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- 3.84
- Max. score:
- 4
- Reversibility:
- not fully reversible within: 10 days
- Remarks on result:
- other: well-defined to moderate erythema
- Irritation parameter:
- erythema score
- Remarks:
- 1 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- 1.08
- Max. score:
- 4
- Reversibility:
- fully reversible within: 10 days
- Remarks on result:
- other: very slight to moderate erythema
- Irritation parameter:
- edema score
- Remarks:
- 1 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- ca. 0.33
- Max. score:
- 4
- Reversibility:
- fully reversible within: 10 dys
- Remarks on result:
- other: very slight to slight edema
- Irritation parameter:
- edema score
- Remarks:
- 4 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- ca. 1.58
- Max. score:
- 4
- Reversibility:
- not fully reversible within: 10 days
- Remarks on result:
- other: very slight or slight edema
- Irritation parameter:
- overall irritation score
- Remarks:
- 4 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- ca. 5.4
- Max. score:
- 8
- Reversibility:
- not reversible
- Remarks:
- within 10 days
- Remarks on result:
- other: Corrosive to skin
- Irritation parameter:
- overall irritation score
- Remarks:
- 1 h exposure
- Basis:
- mean
- Time point:
- 48 h
- Score:
- ca. 1.25
- Max. score:
- 8
- Reversibility:
- fully reversible within: 10 days
- Remarks on result:
- other: corrosive to skin
- Irritation parameter:
- erythema score
- Basis:
- mean
- Time point:
- 24 h
- Remarks on result:
- not measured/tested
- Irritation parameter:
- erythema score
- Basis:
- mean
- Time point:
- 72 h
- Remarks on result:
- not measured/tested
- Irritation parameter:
- edema score
- Basis:
- mean
- Time point:
- 72 h
- Remarks on result:
- not measured/tested
- Irritation parameter:
- edema score
- Basis:
- mean
- Time point:
- 24 h
- Remarks on result:
- not measured/tested
- Irritant / corrosive response data:
- Observations in 4 hours test:
- After 4 hours: Very slight to well-defined erythema, very slight ischemia and very slight edema
- After 48 hours: Well-defined to moderate erythema, very slight to slight ischemia and very slight or slight edema
- After 10 days: Slight to distinct incrustation and decreased hair growth
Observations in 1 h test:
After 1 h: Very slight erythema
After 48 h: Very slight to moderate erythema and very slight or slight edema
After 10 d: No skin effects were observed - Interpretation of results:
- other: Category 1C based on CLP criteria
- Conclusions:
- Based on the results of the read across study, the undiluted test substance is considered to be corrosive to skin.
- Executive summary:
A study was conducted to determine the skin irritation potential of the read across substance, C16 -18 and C18 -unsatd. TMAC (50% active) in rabbits, according to a method similar to OECD Guideline 204. Six rabbits (both sexes) were treated with 0.5 mL of undiluted read across substance (50% active ingredient) in an occlusive patch fixed with adhesive tape and wrapped with an impervious material, for 4 h. Observations were made at 4 h, 48 h and 10 days post-exposure. If the read across substance appeared to be corrosive after 4 h, another study was conducted with a 1 h exposure period under similar test conditions. The Draize scoring criteria was used for evaluating the corrosion potential. At 4 h, very slight to well-defined erythema, very slight ischemia and very slight oedema were observed, with an average irritation score of 4/8. At 48 h, there was well-defined to moderate erythema, very slight to slight ischemia and very slight or slight oedema and the average irritation score was 5.4/8. After 10 days, slight to distinct incrustation and decreased hair growth was observed. After an exposure period of 1 h, very slight erythema was observed with an average irritation score of 0.85/8. After 48 h, there was very slight to moderate erythema and very slight or slight oedema and the average irritation score was 1.25/8. No skin effects were observed after 10 days. Under the study conditions, the undiluted read across substance (50% active ingredient) was corrosive after 4 h of occlusive exposure. Based on the results of the read across study, similar corrosive potential is expected for the test substance.
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- From 24 August, 2001 to 01 September, 2001
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study with acceptable restrictions
- Remarks:
- Study was conducted according to acceptable scientific principles; in compliance with GLP. However, because the test substance is a surfactant, a second step (dye binding) should have been performed.
- Qualifier:
- according to guideline
- Guideline:
- other: Rat Skin Transcutaneous Electrical Resistance (TER) Test INVITTOX no. 115
- Principles of method if other than guideline:
- The skin corrosivity potential of the test substance was assessed using the Transcutaneous Electrical Resistance Assay (TER). This method is based on the fact that corrosive substances produce an irreversible loss of normal stratum comeum integrity and function, which can be measured as a reduction in the inherent transcutaneous electrical resistance (TER) below a corrosive threshold level (i.e., 5kΩ).
- GLP compliance:
- yes (incl. QA statement)
- Species:
- rat
- Strain:
- Wistar
- Details on test animals or test system and environmental conditions:
- Male Wistar rats (Crl: (WI) BR), obtained from Charles River (UK) Limited, Margate, Kent, were used for the in vitro TER assay.
- Type of coverage:
- open
- Preparation of test site:
- other: Skin discs, obtained from the pelts of humanely killed young Crl (WI) BR Wistar strain rats
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes
- Amount / concentration applied:
- A volume of 150 µL of the test substance was applied to the inner epidermal surface using an automatic pipettor
- Duration of treatment / exposure:
- 1, 4 and 24 h
- Observation period:
- 1, 4 and 24 h
- Details on study design:
- SKIN DISC PREPARATION:
The animals were humanely killed by inhalation of a rising concentration of CO2 followed by cervical dislocation. The animals were in the telogen phase of hair growth and little or no hair growth was visible. The quality of the stratum corneum was critical to the success of the assay and so the stage of hair growth was controlled by using animals of exactly the correct age. When the animals had been humanely killed the dorsal skin was removed from each rat as a single pelt. Care was taken during the procedure to avoid unnecessary damage to the pelt. Excess fat was removed and the pelt mounted, epidermal side uppermost, onto a polytetrafluoroethylene (PTFE) tube. The tissue was secured in place using a rubber "O" ring. Excess tissue was trimmed away and the "O" ring/PTFE interface sealed with soft paraffin wax. The tube was supported by a clamp inside a labelled 30 ml glass receptacle containing 10 mL electrolyte solution (1 54 mM MgSO4).
Each disc had to give a resistance value of between 10 kΩ and 25 kΩ in order for the remainder of the pelt to be used in the assay.
TEST SUBSTANCE APPLICATION:
The test substance was applied to the epidermal surface of three skin discs per time point. The test substance was applied for contact periods of 1 h, 4 h and 24 h. The test substane was used as supplied. A volume of 150 µL was applied to the inner epidermal surface using an automatic pipettor.
At the end of the exposure period, the test substance was removed by washing the skin disc with a jet of warm tap water for approximately 10 seconds until no further test substance could be removed.
CONTROLS:
As part of a quality control procedure, a positive and negative control disc were assayed. The positive control was hydrochloric acid (approximately 36%) and the negative control was sterile distilled water. The contact period for the positive and negative controls was 24 h.
DETERMINATION OF TRANSCUTANEOUS ELECTRICAL RESISTANCE (TER):
The TER was measured using a Wheatstone Bridge with a low voltage alternating current. Prior to measurement of the resistance, the surface tension of the skin disc was reduced by adding a sufficient volume of 70% ethanol to cover the epidermis. The ethanol was removed by inverting the tube after approximately 3 secs. The PTFE tube was then placed in the labelled receptor chamber and the tissue was hydrated by the addition of 3 mL MgSO4 solution (154 mM) to the inside of the PTFE tube. Any air bubbles present were dislodged by tapping the tube. The stainless steel electrodes of the databridge were placed on either side of the skin disc. The measurement was taken and a value in Ω/kΩ per skin disc was displayed on the databridge display. The mean TER for the skin discs was calculated for each time point. - Irritation / corrosion parameter:
- transcutaneous electrical resistance (in kΩ)
- Run / experiment:
- Mean
- Value:
- 7
- Remarks on result:
- other: Time point: 1 h. Standard deviation = 3.8
- Irritation / corrosion parameter:
- transcutaneous electrical resistance (in kΩ)
- Run / experiment:
- Mean
- Value:
- 2.6
- Remarks on result:
- other: Time point: 4 h, Standard deviation = 2.2
- Irritation / corrosion parameter:
- transcutaneous electrical resistance (in kΩ)
- Run / experiment:
- Mean
- Value:
- 2.2
- Remarks on result:
- other: Time point: 24 h. Standard deviation = 3.8
- Interpretation of results:
- other: Category1 (corrosive) based on CLP criteria
- Conclusions:
- Under the study conditions, the test substance was considered to have the potential to be corrosive to skin.
- Executive summary:
An in vitro transcutaneous electrical resistance (TER) assay was conducted to assess the skin corrosivity potential of the test substance, C16-18 TMAC (50% active ingredient) using skin discs obtained from the pelts of humanely killed young Crl (WI) BR Wistar rats. The test substance was applied to the epidermal surface of three skin discs per contact period, 1, 4, and 24 hours. At the end of the contact period the test substance was removed using a jet of warm tap water. Corrosive substances are found to produce an irreversible loss of normal stratum corneum integrity and function, which can be measured as a reduction in the inherent TER. A threshold value of 5 kΩ has been established below which substances are considered likely to be corrosive in vivo. The mean electrical resistance measured using low voltage alternating current electronic databridge after 1, 4 and 24 hours was 7, 2.6 and 2.2 kΩ. Under the study conditions, the test substance was considered to have the potential to be corrosive to skin (Sanders, 2002).
- Endpoint:
- skin corrosion: in vitro / ex vivo
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- an in vitro skin irritation study does not need to be conducted because adequate data from an in vivo skin irritation study are available
- Reason / purpose for cross-reference:
- data waiving: supporting information
Referenceopen allclose all
For result tables, kindly refer to the attached background material section of the IUCLID.
According to the guideline INVITTOX no. 115, in case TER values below 5 kilo-Ohm are found, and in case the test substance is a surfactant, then a dye binding study (Sulforrhodamine B) should have been performed to determine whether this would be a false positive result. This has not been done.
Endpoint conclusion
- Endpoint conclusion:
- adverse effect observed (corrosive)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- the study does not need to be conducted because the substance is classified as skin corrosion, leading to classification as serious eye damage (Category 1)
- Reason / purpose for cross-reference:
- data waiving: supporting information
- Endpoint:
- eye irritation: in vivo
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- the study does not need to be conducted because the substance is classified as skin corrosion, leading to classification as serious eye damage (Category 1)
- Reason / purpose for cross-reference:
- data waiving: supporting information
Referenceopen allclose all
Endpoint conclusion
- Endpoint conclusion:
- no study available
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Skin
Study 1: Anin vitrotranscutaneous electrical resistance (TER) assay was conducted to assess the skin corrosivity potential of the test substance, C16-18 TMAC (50% active ingredient) using skin discs obtained from the pelts of humanely killed young Crl (WI) BR Wistar rats. The test substance was applied to the epidermal surface of three skin discs per contact period, 1, 4, and 24 hours. At the end of the contact period the test substance was removed using a jet of warm tap water. Corrosive substances are found to produce an irreversible loss of normal stratum corneum integrity and function, which can be measured as a reduction in the inherent TER. A threshold value of 5 kΩ has been established below which substances are considered likely to be corrosivein vivo. The mean electrical resistance measured using low voltage alternating current electronic databridge after 1, 4 and 24 hours was 7, 2.6 and 2.2 kΩ. Under the study conditions, the test substance was considered to have the potential to be corrosive to skin (Sanders, 2002).
Study 2: A study was conducted to determine the skin irritation potential of the test substance, C16 -18 and C18 -unsatd. TMAC (50% active) in rabbits, according to a method similar to OECD Guideline 204. Six rabbits (both sexes) were treated with 0.5 mL of undiluted test substance (50% active ingredient) in an occlusive patch fixed with adhesive tape and wrapped with an impervious material, for 4 h. Observations were made at 4 h, 48 h and 10 days post-exposure. If the test substance appeared to be corrosive after 4 h, another study was conducted with a 1 h exposure period under similar test conditions. The Draize scoring criteria was used for evaluating the corrosion potential. At 4 h, very slight to well-defined erythema, very slight ischemia and very slight oedema were observed, with an average irritation score of 4/8. At 48 h, there was well-defined to moderate erythema, very slight to slight ischemia and very slight or slight oedema and the average irritation score was 5.4/8. After 10 days, slight to distinct incrustation and decreased hair growth was observed. After an exposure period of 1 h, very slight erythema was observed with an average irritation score of 0.85/8. After 48 h, there was very slight to moderate erythema and very slight or slight oedema and the average irritation score was 1.25/8. No skin effects were observed after 10 days. Under the study conditions, the undiluted test substance (50% active ingredient) was corrosive after 4 h of occlusive exposure.
Eye
In accordance with Annex VII, Section 8.2, Column 2, eye irritation studydoes not need to be conducted because the substance is classified as corrosive to the skin (Category 1C).
Justification for classification or non-classification
Based on the available results from in vitro and in vivo read across studies, the test substance warrants a corrosive, 'Skin Corr. 1C; H314: Causes severe skin burns and eye damage' as well as serious eye damage, 'Eye dam. 1; H31: Causes serious eye damage' classification according to the EU CLP criteria (Regulation EC 1272/2008). Labelling for this endpoint is covered by the above classifications for skin effects.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.