Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 211-745-8 | CAS number: 693-21-0
Guidance on Safe Use
Administrative data
First-aid measures
GENERAL INFORMATION:
Immediately remove any clothing soiled by the product.
Remove breathing equipment only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
AFTER INHALATION: Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation.
AFTER SKIN CONTACT: Immediately wash with water and soap and rinse thoroughly.
AFTER EYE CONTACT: Rinse opened eye for several minutes under running water. Then consult a doctor.
AFTER SWALLOWING: Do not induce vomiting; call for medical help immediately.
Fire-fighting measures
SUITABLE EXTINGUISHING AGENTS:
Water
Use fire extinguishing methods suitable to surrounding conditions.
FOR SAFETY REASONS UNSUITABLE EXTINGUISHING AGENTS: Sand
PROTECTIVE EQUIPMENT: Mouth respiratory protective device.
Accidental release measures
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Remove persons from danger area.
ENVIRONMENTAL PRECAUTIONS:
Inform respective authorities in case of seepage into water course or sewage system.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item DISPOSAL CONSIDERATIONS.
Ensure adequate ventilation.
Handling and storage
HANDLING:
PRECAUTIONS FOR SAFE HANDLING
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
INFORMATION ABOUT FIRE - AND EXPLOSION PROTECTION:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Prevent impact and friction.
Keep respiratory protective device available.
STORAGE:
REQUIREMENTS TO BE MET BY STOREROOMS AND RECEPTACLES: No special requirements.
INFORMATION ABOUT STORAGE IN ONE COMMON STORAGE FACILITY: Not required.
FURTHER INFORMATION ABOUT STORAGE CONDITIONS:
Keep container tightly sealed.
Protect from heat and direct sunlight.
STORAGE CLASS: 1
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
PERSONAL PROTECTIVE EQUIPMENT:
GENERAL PROTECTIVE AND HYGIENIC MEASURES:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
RESPIRATORY PROTECTION:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
PROTECTION OF HANDS:
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
MATERIAL OF GLOVES: butyl rubber, BR
PENETRATION TIME OF GLOVE MATERIAL: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
FOR THE PERMANENT CONTACT IN WORK AREAS WITHOUT HEIGHTENED RISK OF INJURY (E.G. LABORATORY) GLOVES MADE OF THE FOLLOWING MATERIAL ARE SUITABLE:
Butyl rubber, BR
Chloroprene rubber, CR
Nitrile rubber, NBR
BODY PROTECTION: Protective work clothing
Stability and reactivity
THERMAL DECOMPOSITION / CONDITIONS TO BE AVOIDED: No decomposition if used according to specifications.
INCOMPATIBLE MATERIALS:
acid
reducer
oxidiser
HAZARDOUS DECOMPOSITION PRODUCTS: nitrogen oxides
Disposal considerations
WASTE TREATMENT METHODS
RECOMMENDATION: Must not be disposed together with household garbage. Do not allow product to reach sewage system.
UNCLEANED PACKAGING:
RECOMMENDATION: Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
