Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to microorganisms
Administrative data
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 16 February 2011
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study conducted to EU, OECD & US EPA test guidance in compliance with GLP and reoprted with a valid GLP certificate.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 011
- Report date:
- 2011
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.11 (Biodegradation: Activated Sludge Respiration Inhibition Test)
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 850.6800 (Modified Activated Sludge, Respiration Inhibition Test for Sparingly Soluble Chemicals)
- GLP compliance:
- yes (incl. QA statement)
Test material
- Details on test material:
- Name: Reactive Red F03-0318
Constituent 1
- Specific details on test material used for the study:
- Details on properties of test surrogate or analogue material (migrated information):
None
Sampling and analysis
- Analytical monitoring:
- no
- Details on sampling:
- Before the start of the test defined amounts of the test item were dosed into the test flasks in a form of stock solution (2500 mg/L) by mechanical dispersion.
The test concentrations (10, 31, 100, 313 and 1000 mg/L) were chosen to permit the determination of the EC50. Concentrations in excess of nominal 1000 mg test item/L were not tested.
Test solutions
- Vehicle:
- yes
- Details on test solutions:
- Just before the start of the test a concentrated stock solution (2500 mg/L) was prepared by dissolving test item in deionised water.
The test solutions used in the test were freshly prepared by dilution of the stock solution by mechanical dispersion at the beginning of the experiment, in the testing laboratory.
Test organisms
- Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Details on inoculum:
- Species: Activated sludge, microorganisms from a domestic waste water treatment plant.
Source: The activated sludge was supplied from the sewage plant for domestic sewage in Veszprém, Hungary
Conditioning: The activated sludge used for this study was washed and centrifuged and the supernatant liquid phase was decanted. The solid material was re-suspended in isotonic saline solution and again centrifuged. This procedure was repeated twice.
An aliquot of the final sludge suspension was weighed, dried and the ratio of wet sludge to dry weight determined.
Based on this ratio, calculated amounts of wet sludge were suspended in isotonic saline solution to yield a concentration equivalent to 4 g per litre (on dry weight basis). The pH of the activated sludge inoculum was determined to be pH 7.41. The activated sludge was used directly after conditioning.
Study design
- Test type:
- not specified
- Water media type:
- brackish water
- Limit test:
- yes
- Total exposure duration:
- 3 h
- Post exposure observation period:
- No post exposure observation period
Test conditions
- Hardness:
- No data
- Test temperature:
- 19.2 – 20.4°C (during the incubation) and
19.4 – 20.5°C (during oxygen measurement) - pH:
- 7.45 - 7.60
- Dissolved oxygen:
- 7.6 - 7.9 mg O2/l - start
7.1 - 7.5 mg O2/l finish - Salinity:
- No data
- Nominal and measured concentrations:
- The test concentrations (10, 31, 100, 313 and 1000 mg/L) were chosen to permit the determination of the EC50. Concentrations in excess of nominal 1000 mg test item/L were not tested.
- Details on test conditions:
- Test units
Type and size: Erlenmeyer bottles of approximately 350 mL volume and BOD bottles with special neck of 300 mL volume.
Identification: Each test flask was uniquely identified with at least study code, treatment and replicate codes (in case of controls).
Test conditions
Surrounding type: Climate chamber (during the incubation) and controlled environment room (during the formulation and oxygen measuring)
Temperature: 19.2 – 20.4°C (during the incubation) and 19.4 – 20.5°C (during oxygen measurement)
Aeration: With compressed air (1 litre per minute)
Recording: Test conditions were measured with suitable instruments and documented in the raw data.
REFERENCE ITEM
Reference item: 3,5-Dichlorophenol
Supplier: SIGMA-ALDRICH
Batch No.: 15809KI
Expiry Date: 30 August 2012
Storage: In original container, at room temperature
CONTROLS
Untreated Control (C1 and C2)
Two controls (deionised water, synthetic sewage and inoculum, but without addition of the test item) were tested in parallel.
Reference Control (R1 – R3)
In parallel to the study with the test item, the reference item 3,5-Dichlorophenol was tested (the nominal test concentrations of 5, 16 and 32 mg/L) under otherwise identical test conditions.
A stock solution of 3,5-Dichlorophenol was prepared according to the OECD Guideline No. 209: 0.25 g of 3,5-Dichlorophenol was dissolved in 5 mL 1 mol/L NaOH and diluted to about 15 mL with deionised water. Excess of NaOH was neutralised with approximately 4 mL of 0.5 mol/L H2SO4 to the point of incipient precipitation. Thereafter, the mixture was made up to 0.5 litre with deionised water. The final pH was measured to be 7.45 and the final concentration amounted 500 mg/L.
Preparations of the test flasks
One test solution with a final volume of 330 mL was tested per treatment in a glass flask. 10.56 mL synthetic sewage and an adequate amount of the test item stock solution or an adequate volume of the stock solution of the reference item was filled up with deionised water to 198 mL before the start of the test. At the start of the test 132 mL activated sludge inoculum with a sludge concentration of 4 g/L (dry weight) was added, first to first control (C1), then in time intervals of 15 minutes (an arbitrary but convenient interval) to the test solutions of the reference item and the test item and finally to a second control (C2). Time interval between the third reference item flask and the first test item solution flask was more than 15 minutes.
Synthetic Sewage Feed (ratio of composition of culture media referring to 1000 mL)
Peptone: 16.0g
Meat extract: 11.0g
Urea: 3.0g
NaCl: 0.7g
CaCl2 x 2H2O: 0.4g
MgSO4 x 7H2O: 0.2g
K2HPO4: 2.8g
Deionised water: add 1000.0 mL
Measurement of Respiration Rate
For the measurement of the respiration rate a well-mixed sample of each treatment was poured into a BOD flask after exactly 3 hours incubation time, and was not further aerated. The oxygen concentration was measured with a stirring O2 electrode and was recorded for about ten minutes. The oxygen consumption (in mg O2 L-1 minute-1) was determined from the most linear part of the respiration curve.
Measurement of pH, Dissolved Oxygen and Water Temperature
The pH and the oxygen concentrations were determined at the start and at the end of the incubation period in all treatments. The temperature was measured in the climate chamber with a min/max thermometer during the incubation period. The water temperature was recorded during the oxygen measurement in all BOD bottles. - Reference substance (positive control):
- yes
- Remarks:
- 3,5-Dichlorophenol
Results and discussion
Effect concentrationsopen allclose all
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Duration:
- 3 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 1 000 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Details on results:
- INHIBITION of the Respiration Rate
For the measurement of the respiration rate a well-mixed sample of each treatment was poured into a BOD flask after exactly 3 hours incubation time, and was not further aerated. The oxygen concentration was measured with a stirring O2 electrode and was recorded for about ten minutes. The oxygen consumption (in mg O2 L-1 minute-1) was determined from the most linear part of the respiration curve.
Test item
In comparison to the inoculum controls the respiration rate of the activated sludge was not inhibited and a slight stimulation of respiration rates (-4.9; -2.9; -2.9 and -1.0%) were observed in the test concentration range of 10-313 mg Reactive Red F03-0318/L. The respiration rate was inhibited 2.9% at the highest test concentration of 1000 mg/L. Concentrations exceeding 1000 mg/L nominal were not tested. - Results with reference substance (positive control):
- The following nominal concentrations of the positive reference control 3,5-Dichlorophenol were tested on the same activated sludge and under identical conditions as the test item: 5, 16 and 32 mg/L. In comparison to the controls the respiration rate of the activated sludge was inhibited by 28.2% at the lowest nominal concentration of 5 mg/L.
At the nominal concentrations of 16 and 32 mg/L, the respiration rate was inhibited by 59.2% and 78.6%, respectively.
The 3-hour EC50 of 3,5-Dichlorophenol was calculated to be 11.32 mg/L with 95% confidence limits of 9.15 to 14.00 mg/L. - Reported statistics and error estimates:
- The respiration rates of the two controls did not differ by more than 15% (5.85%).
The 3-hour EC50 of the reference item 3,5-Dichlorophenol for the used activated sludge batch was determined to be in the range of 5 to 30 mg/L (11.32 mg/L).
The concentration of dissolved oxygen did not drop below 2.5 mg O2/L during the incubation period, and just before the measurements of the respiration rates the oxygen concentrations were at least 7.1 mg O2/L.
Any other information on results incl. tables
Influence of test item on oxygen consumption of activated sludge
Flask |
ID |
Test group |
Concentration |
Oxygen consumption |
Inhibition |
pH-values |
Oxygen concentration |
||
start * |
end * |
start * |
end * |
||||||
1 |
C1 |
Control |
– |
0.500 |
– |
7.54 |
7.60 |
7.6 |
7.1 |
15 |
C2 |
Control |
– |
0.530 |
– |
7.48 |
7.43 |
7.8 |
7.5 |
|
Mean |
– |
0.515 |
– |
– |
– |
– |
– |
|
|
Deviation (%) |
– |
5.85 |
– |
– |
– |
– |
– |
|
10 |
T1 |
Test item |
10 |
0.540 |
-4.9 |
7.52 |
7.50 |
7.7 |
7.4 |
11 |
T2 |
Test item |
31 |
0.530 |
-2.9 |
7.56 |
7.52 |
7.9 |
7.1 |
12 |
T3 |
Test item |
100 |
0.530 |
-2.9 |
7.51 |
7.53 |
7.8 |
7.3 |
13 |
T4 |
Test item |
313 |
0.520 |
-1.0 |
7.47 |
7.51 |
7.9 |
7.3 |
14 |
T5 |
Test item |
1000 |
0.500 |
2.9 |
7.45 |
7.56 |
7.8 |
7.5 |
* start and end of 3-hour aeration
ID: Code of each group
Influence of reference item on oxygen consumption of activated sludge
Flask |
ID |
Test group |
Concentration |
Oxygen consumption |
Inhibition |
pH-values |
Oxygen concentration |
||
start * |
end * |
start * |
end * |
||||||
1 |
C1 |
Control |
– |
0.500 |
– |
7.54 |
7.60 |
7.6 |
7.1 |
15 |
C2 |
Control |
– |
0.530 |
– |
7.48 |
7.43 |
7.8 |
7.5 |
|
Mean |
– |
0.515 |
– |
– |
– |
– |
– |
|
|
Deviation (%) |
– |
5.85 |
– |
– |
– |
– |
– |
|
2 |
R1 |
Ref. item |
5 |
0.370 |
28.2 |
7.50 |
7.60 |
7.2 |
7.2 |
3 |
R2 |
Ref. item |
16 |
0.210 |
59.2 |
7.52 |
7.62 |
7.6 |
7.7 |
4 |
R3 |
Ref. item |
32 |
0.110 |
78.6 |
7.58 |
7.60 |
7.8 |
8.3 |
* start and end of 3-hour aeration
ID: Code of each group
Applicant's summary and conclusion
- Validity criteria fulfilled:
- yes
- Conclusions:
- Based on measured inhibition rates it can be stated that the 3-hour EC20, EC50 and EC80 were higher than 1000 mg/L.
The NOEC was determined to be 1000 mg/L. - Executive summary:
A laboratory test was carried out with Reactive Red F03-0318 to evaluate the effect of the test item on microorganisms by measuring the respiration rate.
The study was performed in accordance with the study plan agreed upon by Sponsor, the OECD Guidelines for Testing of Chemicals (No. 209, 04 April 1984), the Council Regulation (EC) No 440/2008, Part C, C.11, the Product Properties Test Guideline OPPTS 850.6800 of the United States Environment Protection Agency (EPA) and the Principles of Good Laboratory Practice (GLP) and reoprted with a valid GLP certificate.
The test concentrations (10, 31, 100, 313 and 1000 mg/L) were chosen to permit the determination of the EC50.
In comparison to the inoculum controls the respiration rate of the activated sludge was not inhibited and a slight stimulation of respiration rates (-4.9; -2.9; -2.9 and -1.0%) were observed in the test concentration range of 10-313 mg Reactive Red F03-0318/L. The respiration rate was inhibited 2.9% at the highest test concentration of1000 mg/L, which wasconsidered to reflect the biological variability of the test system and not to be a toxic effect on bacteria. Concentrations exceeding 1000 mg/L nominal were not tested.
In parallel to the study with the test item, the reference item 3,5-Dichlorophenol was tested (the nominal test concentrations of 5, 16 and 32 mg/L) under otherwise identical test conditions.
The 3-hour EC50 of 3,5-Dichlorophenol was calculated to be 11.32 mg/L with 95% confidence limits of 9.15 to 14.00 mg/L.
Based on measured inhibition rates it can be stated that the 3-hour EC20, EC50 and EC80 were higher than 1000 mg/L.
The NOEC was determined to be 1000 mg/L.
The NOEC for respiration rates was not based on the results of a statistical analysis, but it is biologically justified. The respiration rates were not inhibited and influenced dose dependently in the whole concentration range, and the observed slight inhibition (2.9%) at the concentration level of 1000 mg/L was evaluated as reflecting the biological variability in the test. The calculated respiration rate, 0.500 (at 1000 mg/L) was below in the historical control data range (0.519±0.070), but the deviation from the control was within +/- 15%, it can be considered as a biological variability of the test system.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)
Sebbene gran parte del materiale online fornito dall'ECHA sia accessibile nella tua lingua, alcuni contenuti di questa pagina sono disponibili solo in inglese. Maggiori informazioni sulla prassi dell'ECHA in materia di multilinguismo.
Benvenuti al sito dell'ECHA. Non tutte le funzionalità del presente sito sono fruibili con Internet Explorer 7 (e versioni precedenti). Aggiornare Internet Explorer a una versione più recente.
Questo sito web si avvale di cookie affinché possiate usufruire della migliore esperienza sui nostri siti web.
Per saperne di più su come utilizziamo i cookie.