Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
General information:
- Remove clothing where dust collected.
- Adhere to personal protective measures when giving first aid.
After inhalation:
- Remove the casualty into fresh air and keep him calm.
- Ensure supply of fresh air.
- Take medical treatment.
After contact with skin:
- In case of contact with skin, clean with soap and water.
- Take for medical treatment.
After contact with eyes:
- Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.
- Summon a doctor immediately.
After ingestion:
- If swallowed do not induce vomiting, seek medical advice and show safety datasheet or label.
- Rinse out mouth and give plenty of water to drink.
Fire-fighting measures
Suitable extinguishing media: foam
Extinguishing media that must not be used for safety reasons: gaseous extinguishing media; water.
Special hazards arising from the substance or mixture:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), phosphorus oxide (eg Phosphorus pentoxide), carbon dioxide (CO2).
Advice for firefighters - Special protective equipment for firefighting:
- Use self-contained breathing apparatus
- Do not inhale explosion and/or combustion gases
- Wear full protective suit
- In case of fire, use acid-resistant equipment / personal protective equipment.
Further information: Fire residues and contaminated firefighting water must be disposed of in accordance with the local registrations.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
- Do not inhale dust
- Avoid contact with skin and eyes
- Self-contained breathing apparatus
- Wear personal protective equipment. Unprotected persons must be kept away.
Environmental precautions:
- Do not discharge into the drains/surface waters/groundwater.
Methods and material for containment and cleaning up:
- Take up mechanically
- Dispose of absorbed material in accordance with the regulations
- Avoid raising dust.
Handling and storage
Advice on safe handling:
- Provide suitable exhaust ventilation at processing machines
- Use only in well ventilated areas
- Avoid the formation and deposition of dust
- Take precautionary measures against electrostatic loading.
Hygiene measures:
- Wash hands before breaks and after work
- At work do not eat, drink, smoke or take drugs.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
General protective measures:
- Do not inhale dust.
- Avoid contact with eyes and skin.
Respiratory protection: Full mask with dust filter P3
Hand protection:
- Gloves (acid-resistant)
- Nitrile rubber gloves
- Neoprene gloves
Eye protection: Tightly fitting safety glasses and in case of severe danger add face protection (shield).
Body protection: Acid-resistant protective clothing
Stability and reactivity
Chemical stability: Stable
Possibility of hazardous reactions: Risk of dust explosions
Conditions to avaoid: Temperatures exceeding thermal stability of the masterbatch. High concentrations of powders. Electrostatic charges.
Incompatible materials: none
Hazardous decomposition products: Phosphorus oxides (e.g. P2O5)
Disposal considerations
Waste treatment methods:
Product: Disposal in an incineration plant in accordance with the regulations of the local authorities.
Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
