Registration Dossier

Administrative data

First-aid measures

- Description of first aid measures
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet
if possible).
General information:
In case of accident by inhalation: remove casualty to fresh air and keep at rest. In case of respiratory tract
irritation, consult a physician.
After inhalation:
Gently wash with plenty of soap and water. In case of skin irritation, seek medical treatment.
After contact with skin:
Rinse cautiously with water for several minutes. In case of troubles or persistent symptoms, consult an
ophthalmologist.
After contact with eyes:
Rinse mouth thoroughly with water. Let water be drunken in little sips ( dilution effect). Do NOT induce vomiting. In
all cases of doubt, or when symptoms persist, seek medical advice.
After ingestion:
-Most important symptoms and effects, both acute and delayed
No information available.
- Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

Fire-fighting measures

-Extinguishing media
Carbon dioxide (CO2). Dry extinguishing powder. alcohol resistant foam. Atomized water.
Suitable extinguishing media:
High power water jet.
Unsuitable extinguishing media:
-Special hazards arising from the substance or mixture
Can be released in case of fire: Carbon monoxide, Carbon dioxide (CO2).
In case of fire: Wear self-contained breathing apparatus.
-Advice for firefighters
Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water.
Co-ordinate fire-fighting measures to the fire surroundings.

Accidental release measures

-Environmental precautions
Discharge into the environment must be avoided.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents).
Treat the recovered material as prescribed in the section on waste disposal .
Clean contaminated objects and areas thoroughly observing environmental regulations.

Handling and storage

-Precautions for safe handling
Advice on safe handling:
Wear suitable protective clothing.
Advice on protection against fire and explosion:
Usual measures for fire prevention.
-Conditions for safe storage, including any incompatibilities:
Requirements for storage rooms and vessels:
Keep container tightly closed in a cool, well-ventilated place.
Advice on storage compatibility:
Do not store together with: Explosives. Oxidizing solids. Oxidizing liquids. Radioactive substances. Infectious
substances. Food and animal feedingstuff.
Further information on storage conditions:
Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity.
Recommended storage temperature: 5 - 25°C
Protect against: Light. UV-radiation/sunlight. heat. moisture.

Transport information

Land transport (ADR/RID)

UN number:
No dangerous good in sense of this transport regulation.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
No dangerous good in sense of this transport regulation.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
No dangerous good in sense of this transport regulation.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
No dangerous good in sense of this transport regulation.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

-Control parameters
To date, no national critical limit values exist.
- Exposure controls
Appropriate engineering controls:
No special measures are necessary.
Protective and hygiene measures:
Always close containers tightly after the removal of product. When using do not eat, drink, smoke, sniff. Wash
hands before breaks and after work.
Eye/face protection:
Wear safety glasses; chemical goggles (if splashing is possible).
Hand protection:
In case of prolonged or frequently repeated skin contact:
Wear suitable gloves.
Suitable material:
FKM (fluororubber). - Thickness of glove material: 0,4 mm
Breakthrough time >= 8 h
Butyl rubber. - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
CR (polychloroprenes, Chloroprene rubber). - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
NBR (Nitrile rubber). - Thickness of glove material: 0,35 mm
Breakthrough time >= 8 h
PVC (Polyvinyl chloride). - Thickness of glove material: 0,5 mm
Breakthrough time >= 8 h
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN
374 derived from it.
Before using check leak tightness / impermeability. In the case of wanting to use the gloves again, clean them
before taking off and air them well.
Skin protection:
Suitable protective clothing: Lab apron.
Minimum standard for preventive measures while handling with working materials are specified in the TRGS 500.
Respiratory protection:
With correct and proper use, and under normal conditions, breathing protection is not required.

Environmental exposure controls:
No special precautionary measures are necessary.

Stability and reactivity

- Reactivity
No information available.
- Chemical stability
The product is chemically stable under recommended conditions of storage, use and temperature.
- Possibility of hazardous reactions
No information available.
-Conditions to avoid
Protect against: UV-radiation/sunlight. heat.
- Incompatible materials
Materials to avoid: Oxidizing agents, strong. Reducing agents, strong.
-Hazardous decomposition products
Can be released in case of fire: Carbon monoxide Carbon dioxide (CO2).

Disposal considerations

-Waste treatment methods
Advice on disposal:
Observe in addition any national regulations! Consult the local waste disposal expert about waste disposal.
Non-contaminated packages may be recycled.