Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Remove contaminated clothing.
If inhaled: Keep patient calm, remove to fresh air.
On skin contact: Wash thoroughly with soap and water.
On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open.
On ingestion: Rinse mouth and then drink plenty of water.
Symptoms: No significant reaction of the human body to the product known.
Treatment: Symptomatic treatment (decontamination, vital functions).

Fire-fighting measures

Suitable extinguishing media: Dry powder, carbon dioxide, water spray, alcohol-resistant foam
Unsuitable extinguishing media for safety reasons: water jet, Not alcohol resistant foam
Special hazards arising from the substance or mixture: carbon oxides, harmful vapours can be released in case of fire.
Advice for fire-fighters: Wear a self-contained breathing apparatus.
Further information: Can form explosive gas/air mixtures. Cool endangered containers with water-spray. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: No special precautions necessary, use personal protective clothing.
Environmental precautions: Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up: For small amounts: Pick up with suitable absorbent material. For large amounts: Dike spillage. Pump off product. For residues: Contain with absorbent material (e.g. sand, silica gel, acid binder, general purpose binder, sawdust). Sweep/shovel up.
Dispose of absorbed material in accordance with regulations.

Handling and storage

Precautions for safe handling: No special measures necessary provided product is used correctly. Handle in accordance with good industrial hygiene and safety practices
Protection against fire and explosion: Take precautionary measures against static discharges. Avoid all sources of ignition: heat, sparks, open flame.
Conditions for safe storage, including any incompatibilities: Suitable materials for containers: use only use approved steel and plastic containers (stainless steel, polyethylene, high density polyethylene (HDPE), glass)
Further information on storage conditions: Containers should be stored tightly sealed in a dry place. Keep under inert gas. Protect from of light, air and heat.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protective equipment:
Respiratory protection: Not applicable with adequate ventilation
Hand protection: No special protection needed under normal conditions of use. Wear suitable gloves.
Eye protection: Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection: Body protection must be chosen based on level of activity and exposure.
General safety and hygiene measures: Handle in accordance with good industrial hygiene and safety practice.

Stability and reactivity

Reactivity: No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals: Corrosive effects to metal are not anticipated.
Formation of flammable gases: Forms no flammable gases in the presence of water.
Chemical stability: The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions: None if used for intended purpose.

Disposal considerations

Observe national and local legal requirements.