Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-678-8 | CAS number: 109-53-5
Adsorption / desorption
Administrative data
Link to relevant study record(s)
Description of key information
Adsorption to the solid soil phase is not expected.
Key value for chemical safety assessment
Additional information
QSAR-disclaimer:
In Article 13 of Regulation (EC) No 1907/2006, it is laid down that information on intrinsic properties of substances may be generated by means other than tests, provided that the conditions set out in Annex XI (of the same Regulation) are met.
According to Annex XI of Regulation (EC) No 1907/2006 (Q)SAR results can be used if (1) the scientific validity of the (Q)SAR model has been established, (2) the substance falls within the applicability domain of the (Q)SAR model, (3) the results are adequate for the purpose of classification and labeling and/or risk assessment and (4) adequate and reliable documentation of the applied method is provided.
For the assessment of the substance, (Q)SAR results were used for the estimation of the adsorption potential. The criteria listed in Annex XI of Regulation (EC) No 1907/2006 are considered to be adequately fulfilled and therefore the endpoint(s) sufficiently covered and suitable for risk assessment.
Therefore, further experimental studies on the adsorption potential are not provided.
Assessment:
According to Regulation (EC) No 1907/2006, Annex VIII, Section 9.3.1, Column 2, the study on adsorption/desorption screening does not need to be conducted if based on the physicochemical properties the substance can be expected to have a low potential for adsorption (e.g. the substance has a low octanol water partition coefficient), or the substance and its relevant degradation products decompose rapidly.
Isobutyl vinyl ether (CAS 109-53-5) is readily biodegradable (see IUCLID Ch. 5.2.1).
Therefore, an experimental study on adsorption/desorption is not provided.
In order to assess the adsorption potential of the substance, the Koc value was estimated using QSAR models. According to the MCI method of the KOCWIN v2.00 module of EPI Suite v4.11 the substance has a log Koc of 1.4 (BASF SE, 2022). The MCI module is more reliable than the log Kow method of KOCWIN v2.00, which estimates the Koc based on the n-octanol/water partition coefficient. The latter method resulted in a log Koc of 2.5. These estimates are representative for uncharged molecules; the substance is completely within the applicability domain of the estimation models.
Based on these results, adsorption to the solid soil phase is not expected under environmentally relevant conditions.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
