Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 830-582-9 | CAS number: 1951440-04-2
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 24 December 2018 - 28 February 2019
- Reliability:
- 1 (reliable without restriction)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- EU Method A.3 (Relative Density)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- EPA OPPTS 830.7300 (Density / Relative Density / Bulk Density)
- GLP compliance:
- yes
- Type of method:
- pycnometer method
- Specific details on test material used for the study:
- Identification: 4,4'-(4-methylpentane-2,2-diyl)bis((heptyloxy)benzene)
Batch (Lot) Number: AS455433
Expiry date: 01 November 2020 (retest date) (taken from label)
Physical Description: Colourless to light yellow viscous liquid
Purity/Composition: 98.5%
Storage Conditions: At room temperature protected from light - Key result
- Type:
- density
- Density:
- ca. 0.952 g/cm³
- Temp.:
- 20 °C
- Key result
- Type:
- relative density
- Density:
- ca. 0.952
- Temp.:
- 20 °C
- Conclusions:
- A pycnometer was used for the determination of the density and relative density of 4,4'-(4-methylpentane-2,2-diyl)bis((heptyloxy)benzene).
The density of the test item at 20ºC was 0.952 g/cm3 (0.952 x 10^3 kg/m3).
The relative density was 0.952. - Executive summary:
The density (ρ) and relative density (20 4 D ) of the test item were determined using a pycnometer with a volume of 10 mL. The density of the test item was calculated from the difference in weight between the full and empty pycnometer and its volume. The volume of the pycnometer was determined first. The pycnometer was weighed empty. Then it was filled with water, dried on the outside and weighed again. The temperature of the water was measured. The procedure was performed in duplicate. The mean volume of the pycnometer was calculated. The pycnometer was filled with test item, dried on the outside and weighed. The temperature of the test item was measured. The test was performed in duplicate. The mean density and relative density of the test item were determined. Measurements were performed at 20.0 ± 0.5°C. Weightings were performed on an analytical balance with an accuracy of 0.1 mg. The test item was protected from light.
The density of the test item at 20ºC was 0.952 g/cm3 (0.952 x 10^3 kg/m3).
The relative density was 0.952.
Reference
Description of key information
A pycnometer was used for the determination of the density and relative density of 4,4'-(4-methylpentane-2,2-diyl)bis((heptyloxy)benzene).
The density of the test item at 20ºC was 0.952 g/cm3 (0.952 x 10^3 kg/m3).
The relative density was 0.952.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.952
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
