Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures:

General advice:
In the case of accident or if you feel unwell, seek medical advice immediately. When symptoms persist or in all cases of doubt seek medical advice.

Protection of first-aiders:
First Aid responders should pay attention to self-protection, and use the recommended personal protective equipment when the potential for exposure exists.

If inhaled:
If inhaled, remove to fresh air. Get medical attention if symptoms occur.

In case of skin contact:
Wash with water and soap as a precaution. Get medical attention if symptoms occur.

In case of eye contact:
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.

If swallowed:
If swallowed, DO NOT induce vomiting unless directed to do so by medical personnel. Get medical attention. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed:

Risks:
Harmful if swallowed.

Indication of any immediate medical attention and special treatment needed:

Treatment:
Treat symptomatically and supportively.

Fire-fighting measures

Extinguishing media:

Suitable extinguishing media:
Water spray; Alcohol-resistant foam; Carbon dioxide (CO2); Dry chemical

Unsuitable extinguishing media:
None known.

Special hazards arising from the substance or mixture:

Specific hazards during firefighting:
Exposure to combustion products may be a hazard to health.

Hazardous combustion products:
Carbon oxides; Nitrogen oxides (NOx)

Advice for firefighters:

Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

Specific extinguishing methods:
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Personal precautions:
Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.

Environmental precautions:
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g. by containment or oil
barriers). Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.

Methods and material for containment and cleaning up:

Methods for cleaning up tainer for disposal.:
Soak up with inert absorbent material. For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill with suitable absorbent. Local or national regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which regulations are applicable. Sections "Disposal considerations" and "Regulatory information" of this SDS provide information regarding certain local or national requirements.

Reference to other sections:
See sections: "Handling and storage", "Exposure controls/personal protection", "Toxicological information", "Ecological information" and "Disposal considerations".

Handling and storage

Precautions for safe handling:

Technical measures:
See Engineering measures under EXPOSURE CONTROLS/PERSONAL PROTECTION section.

Local/Total ventilation:
Use with local exhaust ventilation.

Advice on safe handling:
Avoid inhalation of vapour or mist. Do not swallow. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Handle in accordance with good industrial hygiene and safety practice. Take care to prevent spills, waste and minimize release to the environment.

Hygiene measures:
Ensure that eye flushing systems and safety showers are located close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.

Conditions for safe storage, including any incompatibilities:

Requirements for storage areas and containers:
Keep in properly labelled containers. Store in accordance with the particular national regulations.

Advice on common storage:
Do not store with the following product types: Strong oxidizing agents

Recommended storage temperature:
<= 40 °C

Specific end use(s):

Specific use(s):
No data available

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated as a dangerous good
Shipping information
Proper shipping name and description:
Not regulated as a dangerous good
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated as a dangerous good
Shipping information
Proper shipping name and description:
Not regulated as a dangerous good
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:
Contains no substances with occupational exposure limit values.

Exposure controls:

Engineering measures:
Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.

Personal protective equipment:

Eye protection:
Wear the following personal protective equipment: Safety glasses

Hand protection Material:
Impervious gloves

Remarks:
Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. Breakthrough time is not determined for the product. Change gloves often! For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.

Skin and body protection:
Skin should be washed after contact.

Respiratory protection:
No personal respiratory protective equipment normally required.

Filter type:
Organic vapour type (A)

Stability and reactivity

Reactivity:
Not classified as a reactivity hazard.

Chemical stability:
Stable under normal conditions.

Possibility of hazardous reactions:
Hazardous reactions:
Can react with strong oxidizing agents.

Conditions to avoid:
Conditions to avoid:
None known.

Incompatible materials:
Materials to avoid:
Oxidizing agents

Hazardous decomposition products:
No hazardous decomposition products are known.

Disposal considerations

Waste treatment methods:

Product:
Dispose of in accordance with local regulations. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities..

Contaminated packaging:
Empty containers should be taken to an approved waste handling site for recycling or disposal. If not otherwise specified: Dispose of as unused product.