Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
auto-ignition temperature (liquids)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
From 18 to 20th July 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
The study was conducted according to an internationally recognised method. The substance is considered to be adequately characterised. Therefore full validation applies.
Qualifier:
according to guideline
Guideline:
EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
Deviations:
no
Qualifier:
according to guideline
Guideline:
DIN 51794 (Testing of mineral oil hydrocarbons - Determination of ignition temperature)
Version / remarks:
2003
Deviations:
no
Principles of method if other than guideline:
Not applicable
GLP compliance:
yes (incl. QA statement)
Remarks:
inspected on 13 and 14 October 2014 / signed on 08 April 2015
Key result
Auto-ignition temperature:
ca. 285 °C
Atm. press.:
>= 99 410 - <= 100 083 Pa

Results

Table 4.12/1: Auto ignition temperature – results

Experiment

Value

Ignition delay

Drops used

First test series

289 °C

20 s

5

Second test series

289 °C

18 s

5

Third test series

294°C

19 s

5

The lowest value of the auto ignition temperature is 289°C. This value was determined using 5 drops test item. The test item showed auto ignition after 18 and 20 seconds.

The auto ignition temperature (result of determination) is the lowest value from the lowest values of the three experiments, rounded down to a whole multiple of 5 °C. Therefore, the auto ignition temperature is stated as 285 °C.

Validity

The requirements for precision of the DIN standard in case of one observer and one test system (no interlaboratory testing, no second observer) are stated as follows: Sufficient accordance is reached if the largest difference between measured temperatures was:

- at the most 5 °C for ignition temperatures up to 300 °C

- at the most 10 °C for ignition temperatures above 300 °C.

As these demands are not fulfilled, the higher temperature is discarded.

As no difference between three evaluated measured ignition temperatures, accordance with the demands of the DIN standard is given.

Conclusions:
Under the test conditions, the auto-ignition temperature of the test item was stated as 285°C between 99,410 and 100,083 kPa.
This parameter/method is not relevant for classification, however the information is useful regarding potential additional fire hazard. No particular hazard is anticipated in normal conditions of storage.
Executive summary:

The study was conducted according to procedure and demands of EU-Method A.15 and DIN 51794.

The auto ignition temperature was determined in three independent determinations. The lowest value of the auto ignition temperature is 289 °C. This value was determined using 5 drops of test substance. The test substance showed auto ignition after 18 and 20 seconds.

Due to safety reasons and according to the guidelines the auto ignition temperature (result of determination) is the lowest value from the lowest values of the experiments, rounded down to a whole multiple of 5 °C.

Therefore, the auto-ignition temperature of the test item is stated as 285 °C (99410 -100083 Pa).

Description of key information

The test item has been determined to have an auto-ignition temperature of 285°C under the test conditions (99410 -100083 Pa).

This parameter/method is not relevant for classification, however the information is useful regarding potential additional fire hazard.

No particular hazard is anticipated in normal conditions of storage.

Key value for chemical safety assessment

Autoflammability / Self-ignition temperature at 101 325 Pa:
285 °C

Additional information

A GLP study was performed in order to determine the auto-ignition temperature of the test substance in compliance with the EU-Method A.15 and stardard DIN 51794 listed in EU A15. 

The auto ignition temperature was determined in three independent determinations. The lowest value of the auto ignition temperature is 289 °C. This value was determined using 5 drops of test substance. The test substance showed auto ignition after 18 and 20 seconds.

Due to safety reasons and according to the guidelines the auto ignition temperature (result of determination) is the lowest value from the lowest values

of the experiments, rounded down to a whole multiple of 5 °C.

Therefore, the auto-ignition temperature of the test item is stated as 285 °C (99410 -100083 Pa).