Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Environmental fate & pathways

Biodegradation in water: screening tests

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
biodegradation in water: ready biodegradability
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2015-01-15 to 2015-02-13
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test)
Deviations:
yes
Remarks:
s. below
Principles of method if other than guideline:
The temperature during the test was at 24.5 °C for 2 hours (2015-01-29) and at 19 °C for 1 day (2015-02-01 to 2015-02-02).
GLP compliance:
yes (incl. QA statement)
Oxygen conditions:
aerobic
Inoculum or test system:
activated sludge, non-adapted
Details on inoculum:
- Source of inoculum/activated sludge (e.g. location, sampling depth, contamination history, procedure):
Municipal sewage treatment plant, D-31137 Hildesheim, Germany
- Pretreatment/Concentration of sludge:
The activated sludge was washed twice with chlorine free tap water. After the second washing the settled sludge was resuspended in mineral salts medium and was maintained in an aerobic condition by aeration for 2 ¾ hours. Thereafter the sludge was homogenized with a blender. After sedimentation the supernatant was decanted and maintained in an aerobic condition by aeration with CO2 free air until test start. 10 mL/L of this mixture were used to initiate inoculation.
Colony forming units in the test vessel: approx. 10^7 - 10^8 CFU/L





Duration of test (contact time):
28 d
Initial conc.:
18 other: mg/L
Based on:
test mat.
Parameter followed for biodegradation estimation:
CO2 evolution
Details on study design:
TEST CONDITIONS
- Composition of medium: Mineral salts medium acc. to OECD 301 B / CO2 Evolution Test
- Test temperature: Nominal 22 +/- 2°C (actually measured: 19.0 - 24.5 °C)
- Dispersion treatment: Continuous stirring
- Aeration: 30 - 100 mL/min
- Photoperiod: Low light conditions (brown glass bottles)

TEST SYSTEM
- Culturing apparatus: 5000 mL brown glass flasks
- Number of culture flasks/concentration: 1 for the reference item, 1 for toxicity control (test and reference item), 2 for the control, 2 for the test item
- Method used to create aerobic conditions: Aeration with 30 - 100 mL/min
- Measuring equipment: Visual check of aeration twice per day
- Details of trap for CO2 and volatile organics if used:
CO2 adsorption vessels were connected to the air outlets of the incubation vessels via a series of 3 gas wash bottles, each containing 100 mL of
a 0.0125 mol/L Ba(OH)2 solution.
- Course of the study:
The following incubation vessels were prepared:
- two for the test item concentration (P1, P2)
- one for the functional control (R1)
- two for the inoculum control (C1, C2)
- one for the toxicity control (T1)
The necessary amounts of ultrapure water, mineral salts medium and inoculum were placed in each incubation vessel. The vessels were aerated for 24 h with CO2 free air. After 24 h the CO2 adsorption vessels were connected to the air outlets of the incubation vessels via a series of 3 gas wash bottles, each containing 100 mL of a 0.0125 mol/L Ba(OH)2 solution. Test and reference item were weighed out. The test item was weighed out onto object slides and transferred with these into the test vessel. The vessels were made up to 3 L with ultrapure water and connected to the system for the production of CO2 free air. On day 28, 1 mL 37 % HCl was added to each of the vessels. Aeration was continued for further 24 h and the quantity of CO2 released was determined.


SAMPLING
- Sampling frequency:
Backtitration of the residual Ba(OH)2 with 0.05 N HCL was carried out three times a week during the first ten days and thereafter twice weekly.
- Sampling method:
For each titration the first gas wash bottle was removed and a new bottle was connected to the last one.

CONTROL AND BLANK SYSTEM
- Inoculum blank: Test medium without test and reference item
- Abiotic sterile control: No
- Toxicity control: Test item and reference item in test concentration


STATISTICAL METHODS:
- The theoretical production of carbon dioxide (ThCO2) of the test item and functional control was calculated by the carbon content (1) and the
molecular formula (2), respectively.

ThCO2 [mgCO2/mg] = 3.67 * TOC [mgC/mg test item] (1)

ThCO2 [mgCO2/mg] = (C-Atoms *molecular weight of CO2)/molecular weight of referenz item) (2)


- The produced CO2 was calculated by: 1 mL HCl (c = 0.05 mol/L) = 1.1 mg CO2

- The net amount of CO2 produced was calculated by correcting the results of the test item and functional control for endogenous CO2 production
of the inoculum controls.

- The biodegradation was calculated from the ratio theoretical CO2 production to net CO2 production:

Degradation [%] = (net CO2 * 100)/(THCO2 [mg CO2/3L])
Reference substance:
benzoic acid, sodium salt
Parameter:
% degradation (CO2 evolution)
Value:
100
Sampling time:
28 d
Details on results:
The adaptation phase of the functional control changed after 2 days into the degradation phase (degradation >= 10 %). The course of the degradation was rapid and the functional control reached the pass level of 60 % within 7 days and a biodegradation of 83 % after 28 days. The validity criterion degradation > 60 % after 14 days is fulfilled.

In the toxicity control containing both test and reference item a biodegradation of 80 % was determined within 14 days and it came to 94 % after 28 days. The biodegradation of the reference item was not inhibited by the test item in the toxicity control.

The biodegradation of the test item is shown in comparison to the readily degradable functional control and the toxicity control. Both test item replicates reached the 10 % level (beginning of biodegradation) within 3 days. The 60 % pass level was reached by the mean of replicates within 8 days. The mean biodegradation on day 28 was 100 %.

Under the test conditions the test item is classified as readily biodegradable within the 28 day period of the study.

In the inoculum control the total CO2 production was 28.7 mg CO2/L after 28 days.
Results with reference substance:
In the toxicity control containing both test and reference item a biodegradation of 80 % was determined within 14 days and it came to 94 % after 28 days. The biodegradation of the reference item was not inhibited by the test item in the toxicity control.
Validity criteria fulfilled:
yes
Interpretation of results:
readily biodegradable
Conclusions:
Under the test conditions the test item is classified as readily biodegradable in the 10-day-window and within 28 days.
Executive summary:

The ready biodegradability of the test item Reaction mass of C18 (unsaturated) esters with glycerine oligomers was determined with a non-adapted activated sludge over a test period of 28 days in the Modified Sturm Test. The study was conducted according to OECD 301 B . The test item was tested at a concentration of 18 mg/L with 2 replicates corresponding to a carbon content (TOC) of 11.8 mg C/L in the test vessels.The test vessels were incubated at low light conditions and at a temperature of 19.0 – 24.5 °C.

The biodegradation of the test item was followed by titrimetric analysis of the quantity of CO2produced by the respiration of bacteria. The degradation was stopped on day 28 by acidification of the test solutions. The last titration was made on day 29 after residual CO2had been purged from the test solutions over a period of 24 hours. The percentage CO2production was calculated in relation to the theoretical CO2production (ThCO2) of the test item. The biodegradation was calculated for each titration time.

 

To check the activity of the test system sodium benzoate was used as functional control. The percentage degradation of the functional control reached the pass level of 60 % within 7 days and a biodegradation of 83 % after 28 days.

 

In the toxicity control containing both test and reference item a biodegradation of 80 % was determined within 14 days and it came to 94 % after 28 days. The biodegradation of the reference item was not inhibited by the test itemin the toxicity control.

 

The biodegradation of the test item is shown graphically in comparison to the readily degradable functional control and the toxicity control. Both test item replicates reached the 10 % level (beginning of biodegradation) within 3 days. The course of the degradation was rapid and the test item replicates reached the pass level of 60 % within 8 days and a biodegradation of 100 % after 28 days.

The test item is classified as
 readily biodegradable
in the 10 -day-window and within 28 days.

 

Biodegradation of the Test Item Reaction mass of C18 (unsaturated) esters with glycerine oligomers in Comparison to the Functional Control and Toxicity Control

 

Biodegradation [%]

 

Study Day [d]

 

6

14

21

28*

Test Item, 1stReplicate

52

84

94

100

Test Item, 2ndReplicate

55

84

93

100

Functional Control

57

80

82

83

Toxicity Control
test item + reference item

36

80

89

94

Description of key information

Key value for chemical safety assessment

Biodegradation in water:
readily biodegradable

Additional information