Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 940-284-1 | CAS number: 1591782-62-5
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
- General information:
Remove soiled or soaked clothing immediately.
- After inhalation:
When inhaled remove to fresh air and seek medical aid.
- After contact with skin:
In case of contact with skin wash off immediately with plenty of water.
- After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
- After ingestion:
When swallowed accidentally, drink sufficient amounts of water and seek medical aid.
Most important symptoms and effects, both acute and delayed
Symptoms: No symptoms known currently.
Hazards: No hazards known at this time.
Indication of any immediate medical attention and special treatment needed
Treatment: Treat symptomatically.
Fire-fighting measures
Suitable extinguishing media:
water spray jet
alcohol-resistant foam
carbon dioxide
dry powder
Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Nitrous gases (NOx),Carbon monoxide (CO)
Advice for firefighters
Special protective equipment for firefighting: Use self-contained breathing apparatus.
Further information: Wear protective equipment.
Accidental release measures
Personal precautions, protective equipment and emergency procedures:
- Ensure adequate ventilation.
- Wear suitable personal protective equipment.
Environmental precautions:
- Do not allow to enter drains or waterways.
Methods and material for containment and cleaning up:
- Remove mechanically.
- Pick up rest with binding material (eg sawdust, sand, universal binder).
Handling and storage
Precautions for safe handling
- Advice on safe handling:
Provide good ventilation of working area (local exhaust ventilation if necessary).
- Hygiene measures:
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.
- Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection.
Conditions for safe storage, including any incompatibilities
- Further information on storage conditions:
Keep container tightly closed in a cool, well-ventilated place.
Storage: cool and dry
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
General protective measures:
Avoid contact with eyes and skin.
Respiratory protection :
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Full mask to standard DIN EN 136
Filter A (organic gases and vapours) to standard DIN EN 141
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.
Hand protection :
For long-term exposure:
Butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Eye protection :
safety glasses
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)
Stability and reactivity
Chemical stability:
Under normal conditions the product is stable.
Possibility of hazardous reactions:
Uncleaned empty vessels may contain product gases which can form explosive mixtures with air.
Hazardous decomposition products:
When handled and stored appropriately, no dangerous decomposition products are known.
Disposal considerations
Waste treatment methods:
- Product: In accordance with local authority regulations, take to special waste incineration plant.
- Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
