Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction product of Crude sludge and Calcium oxide. Crude sludge is the mixture of by-products of petroleum hydrocarbons refining (especially Total petroleum hydrocarbons, Polycyclic aromatic hydrocarbons, acid-refined heavy petroleum distillates). The Crude sludge is neutralised by calcium oxide in the ratio 80:20. The maturing process proceeds under ambient conditions and takes for at least 3 days. Subsequently, the reaction product is processed mechanically.
EC number: 930-592-4 | CAS number: -
Short-term toxicity to aquatic invertebrates
Administrative data
Link to relevant study record(s)
Description of key information
Method C.2 – Daphnia sp. Acute Immobilisation Test, Council Regulation (EC) No. 440/2008, published in O.J.L 142, 2008.
GLP study
Key value for chemical safety assessment
Fresh water invertebrates
Fresh water invertebrates
- Effect concentration:
- 100 mg/L
Additional information
The test substance was tested in acute immobilisation test on Daphnia magna.
Since the test substance is multi-component poorly soluble substance the water-accommodated fractions (WAFs) were prepared by adding measured amounts of the test substance to the dilution water and then were stirred for a period of 72 hours.
The preliminary test was performed in range of test substance loading rates 10 – 100 mg/L. Based on the highest observed immobilisation 10 % in the preliminary test, the main test was performed. The main test was performed in range of test substance loading rates 62 – 100 mg/L. The test was performed as static.
The study was performed without the analytical determination of the test substance concentrations. Only the concentrations of metals in the highest loading rate 100 mg/L were analysed in the limit test. For all evaluations and results the loading rates of the test substance were used.
Test results:
24 hour–EL50 > 100 mg/L (loading rate)
48 hour–EL50 > 100 mg/L (loading rate)
24 hour–NOELR = 91 mg/L (loading rate)
48 hour–NOELR = 75 mg/L (loading rate)
24 hour–EL100 > 100 mg/L (loading rate)
48 hour–EL100 > 100 mg/L (loading rate)
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
