Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 484-480-0 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Keep the victim warm and quiet. Remove the victim from
contamination immediately to fresh air.
Emergency measure - Eyes: Wear eye/face protection. Chemical goggles are recommended.
Emergency measure - Skin: If prolonged or repeated contact is likely, chemical
resistant clothing is recommended.
Emergency measure - Ingestion: Consult a physician.
Fire-fighting measures
Recommended extinguishing agent: Extinguish with foam, carbon dioxide, dry powder or water fo
g
Product arising from burning: Carbon dioxide, carbon monoxide, oxides of nitrogen, water,
hydrofluoric acid
Product determined by test: N
Protective equipment: Selection of respiratory protection for fire fighting:
follow the general fire precaution indicated in the
workplace. Self-contained breathing apparatus and full
protective clothing must be worn in case of fire.
Accidental release measures
Emergency measures in case of spillage: Personal precautions: extinguish all ignition sources. Avoid
sparks, heat and smoking. Ventilate. Avoid inhalation of
vapors/spray and contact with skin and eyes. Wear suitable
protective clothing.
Spill clean-up methods: Absorb spillage with non-
combustible, absorbent material. Remove sources of ignition.
Beware of the explosion danger.
Environmental precautions: Do not allow to enter drains,
sewers or watercourses.
Handling and storage
Handling: All handling to take place in well-entilated area. Local
exhaust is recommended. Avoid inhalation of vapors and spray
mist and contact with skin and eyes. Wear approved safety
goggles. Do not smoke and do not spray near a naked flame or
other sources of ignition. The product is flammable, and
heating may generate vapors which may form explosive
vapor/air mixtures. Vapors are heavier than air and may
travel along the floor and in the bottom of containers.
Vapors may be ignited by a spark, a hot surface or an ember.
Observe good industrial hygiene practices.
Storage: Store in closed container at temperatures between -4°F and
77°F. Store in a dry place. Keep away from heat, sparks and
open flame. Store in a cool and well-ventilated place.
Follow rules for flammable liquids. Protect against direct
sunlight.
Packaging of the substance and or preparation: 250 g FHDPE bottles, 1 liter HDPE bottles, 4 liter HDPE
bottles, in two plastic bags per unit.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport code: Not applicable
Transport: Not applicable
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: No specific danger
Chemical reaction with water: None, Polymer and other components may precipitate
Dust explosion: The substance is not likely to explode.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Recovery by mechanically collection
Industry - Possibility of neutralisation: Neutralisation, not specified
Industry - Possibility of destruction: controlled discharge: Removal, not specified
Industry - Possibility of destruction - incineration: Incineration, not specified
Industry - Possibility of destruction - water purification: Not specified
Industry - Possibility of destruction - other: Wastes from Semiconductor Fabs are collected and disposed of
according to national regulations. This is typically done
by off-site incineration (organic wastes) and/or appropriate
waste treatment for aqueous wastes.
Public at large - Possibility of recovery/recycling: Not specified
Public at large - Possibility of neutralisation: Not specified
Public at large - Possibility of destruction: controlled discharge: Not specified
Public at large - Possibility of destruction - incineration: Not specified
Public at large - Possibility of destruction - water purification: Not specified
Public at large - Possibility of destruction - others: Product is not provided to the public at large. Spill
remediation is as according to the MSDS and through
professional contact/support, also outlined on MSDS.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
