Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 460-140-7 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Move exposed person to fresh air; in case of indisposition
seek medical advice.
Emergency measure - Eyes: Rinse with plenty of water; if irritation occurs, seek
medical advice
Emergency measure - Skin: Wash with soap and water
Emergency measure - Ingestion: Symptomatic treatment; in case of indisposition seek medical
advice.
seek medical advice.
Emergency measure - Eyes: Rinse with plenty of water; if irritation occurs, seek
medical advice
Emergency measure - Skin: Wash with soap and water
Emergency measure - Ingestion: Symptomatic treatment; in case of indisposition seek medical
advice.
Fire-fighting measures
Recommended extinguishing agent: Water, dry powder, foam
Product arising from burning: Combustion products may contain carbon-, nitrogen- and
sulfuroxides as well as hydrogen chloride.
Product determined by test: N
Protective equipment: Wear self contained breathing apparatus
Product arising from burning: Combustion products may contain carbon-, nitrogen- and
sulfuroxides as well as hydrogen chloride.
Product determined by test: N
Protective equipment: Wear self contained breathing apparatus
Accidental release measures
Emergency measures in case of spillage: Avoid skin and eye contact. Do not inhale dust. Wear
appropriate personal protective equipment (see "handling").
Solids: sweep up avoiding dust formation (wet powders with
water or use an approved industrial vacuum cleaner) and
place in suitable containers for disposal.
Liquids: absorb using an adequate absorbent (such as
kieselgur, sand, saw dust), collect and place in suitable
containers (labelled according to TRGS 201) for disposal.
Dispose of waste material in authorized incineration
facilities.
appropriate personal protective equipment (see "handling").
Solids: sweep up avoiding dust formation (wet powders with
water or use an approved industrial vacuum cleaner) and
place in suitable containers for disposal.
Liquids: absorb using an adequate absorbent (such as
kieselgur, sand, saw dust), collect and place in suitable
containers (labelled according to TRGS 201) for disposal.
Dispose of waste material in authorized incineration
facilities.
Handling and storage
Handling: Alle Arbeitsverfahren sind grundsätzlich so zu gestalten,
dass die Belastung durch Einatmen des Stoffes so gering wie
möglich und der Augenkontakt ausgeschlossen ist.
Bei Abfüll-, Umfüll- und Dosierarbeiten sowie bei Probe-
nahmen sollten geschlossene bzw. zumindest staubdichte
Vorrichtungen verwendet werden.
Beim Umgang in offenen Systemen sollte möglicher Staub
unmittelbar am Entstehungsort abgesaugt werden.
Wenn technische Absaug- oder Lüftungsmaßnahmen nicht
möglich oder unzureichend sind, sollte Atemschutz
(z.B.: Staubmaske mit Partikelfilter) getragen werden.
Zur Vermeidung von Hautkontakt sollten geprüfte Schutz-
handschuhe (z.B. aus PVC oder Nitrilkautschuk) und
geeignete Schutzkleidung (z.B.: normale Arbeitskleidung)
getragen werden.
Ein sicherer Augenschutz (z.B. Korbbrille) ist unbedingt
erforderlich.
In unmittelbarer Nähe des Arbeitsbereiches sollten
Augenbrausen bereitgestellt und ihr Standort auffällig
gekennzeichnet werden.
Bei möglicher Staubentwicklung sollten wegen der
potentiellen Staubexplosionsgefahr potentielle Zünd-
quellen aus dem Arbeitsbereich entfernt werden.
Des Weiteren sollten Maßnahmen gegen elektrostatische
Aufladungen getroffen werden.
"ENGLISH"
While handling in open systems possible dust should be
sucked off directly at the place of origin. If technical
extraction or ventilation systems are notpossible or
insufficient, respiratory protection (e.g.a filtrating
mask with a particle filter) should be worn. To avoid skin
contact proofed protective gloves (e.g. PVC or nitrile
rubber) and suitable protective clothing (e.g. normal work
clothes) should be worn.
A safe eye protection (e.g. safety goggles) is absolutely
necessary. In direct vicinity of the working place eye
showers should be provided and be labelled conspicuously.
If dust forms potential ignition sources should be removed
from the working place because of the possible danger of
dust explosions. More over that precautionary measures
against static discharges should be taken.
Storage: The substance should be stored in well sealed, labelled
according to the regulations and secure containers in
adequate rooms at room temperature. The containers should be
secured against falling.
Avoid residues outside the containers.
Packaging of the substance and or preparation: Adequate plastic containers: Big-Bags (ca 500 kg)
cardboard folding box with PE inliners: 15-30 kg
(Wellpappfaltkiste mit PE Inliner)
dass die Belastung durch Einatmen des Stoffes so gering wie
möglich und der Augenkontakt ausgeschlossen ist.
Bei Abfüll-, Umfüll- und Dosierarbeiten sowie bei Probe-
nahmen sollten geschlossene bzw. zumindest staubdichte
Vorrichtungen verwendet werden.
Beim Umgang in offenen Systemen sollte möglicher Staub
unmittelbar am Entstehungsort abgesaugt werden.
Wenn technische Absaug- oder Lüftungsmaßnahmen nicht
möglich oder unzureichend sind, sollte Atemschutz
(z.B.: Staubmaske mit Partikelfilter) getragen werden.
Zur Vermeidung von Hautkontakt sollten geprüfte Schutz-
handschuhe (z.B. aus PVC oder Nitrilkautschuk) und
geeignete Schutzkleidung (z.B.: normale Arbeitskleidung)
getragen werden.
Ein sicherer Augenschutz (z.B. Korbbrille) ist unbedingt
erforderlich.
In unmittelbarer Nähe des Arbeitsbereiches sollten
Augenbrausen bereitgestellt und ihr Standort auffällig
gekennzeichnet werden.
Bei möglicher Staubentwicklung sollten wegen der
potentiellen Staubexplosionsgefahr potentielle Zünd-
quellen aus dem Arbeitsbereich entfernt werden.
Des Weiteren sollten Maßnahmen gegen elektrostatische
Aufladungen getroffen werden.
"ENGLISH"
While handling in open systems possible dust should be
sucked off directly at the place of origin. If technical
extraction or ventilation systems are notpossible or
insufficient, respiratory protection (e.g.a filtrating
mask with a particle filter) should be worn. To avoid skin
contact proofed protective gloves (e.g. PVC or nitrile
rubber) and suitable protective clothing (e.g. normal work
clothes) should be worn.
A safe eye protection (e.g. safety goggles) is absolutely
necessary. In direct vicinity of the working place eye
showers should be provided and be labelled conspicuously.
If dust forms potential ignition sources should be removed
from the working place because of the possible danger of
dust explosions. More over that precautionary measures
against static discharges should be taken.
Storage: The substance should be stored in well sealed, labelled
according to the regulations and secure containers in
adequate rooms at room temperature. The containers should be
secured against falling.
Avoid residues outside the containers.
Packaging of the substance and or preparation: Adequate plastic containers: Big-Bags (ca 500 kg)
cardboard folding box with PE inliners: 15-30 kg
(Wellpappfaltkiste mit PE Inliner)
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Not classified
Transport in well sealed suitable containers. The containers
should be secured against falling. Label containers in
accordance with pertinent regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: Not known
Chemical reaction with water: No dangerous reaction with water.
Dust explosion: Not to be expected if handled under good industrial hygiene
practices.
Dust explosion determined by test: N
Chemical reaction with water: No dangerous reaction with water.
Dust explosion: Not to be expected if handled under good industrial hygiene
practices.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Normal application results in the consumption of ca. 88 %
by irreversible binding to the cellulose or cotton fibers;
recovery or recycling of the remaining test substance is
not possible.
Industry - Possibility of neutralisation: No suitable method known
Industry - Possibility of destruction: controlled discharge: Not suitable for deposit in landfill site.
Industry - Possibility of destruction - incineration: Incineration with flue gas scrubbing.
Industry - Possibility of destruction - water purification: Removal by controlled discharge to a waste water treatment
plant. It is estimated that approx. 12 % of the total
quantity used is discharged into internal industrial
effluents as highly diluted solution. A purification of
the waste water in a waste water treatment plant is
recommended. The dyestuff should be used in a well
equiped dyehouse.
If necessary the waste water can be purified prior to the
waste water treatment by membrane filtration or by
floculation with cationic agents or by treatment with ozone.
The most effective method is the membrane filtration: more
than 99 % of the remaining dyestuff can be removed from the
waste water.
Industry - Possibility of destruction - other: None
Public at large - Possibility of recovery/recycling: Not applicable
by irreversible binding to the cellulose or cotton fibers;
recovery or recycling of the remaining test substance is
not possible.
Industry - Possibility of neutralisation: No suitable method known
Industry - Possibility of destruction: controlled discharge: Not suitable for deposit in landfill site.
Industry - Possibility of destruction - incineration: Incineration with flue gas scrubbing.
Industry - Possibility of destruction - water purification: Removal by controlled discharge to a waste water treatment
plant. It is estimated that approx. 12 % of the total
quantity used is discharged into internal industrial
effluents as highly diluted solution. A purification of
the waste water in a waste water treatment plant is
recommended. The dyestuff should be used in a well
equiped dyehouse.
If necessary the waste water can be purified prior to the
waste water treatment by membrane filtration or by
floculation with cationic agents or by treatment with ozone.
The most effective method is the membrane filtration: more
than 99 % of the remaining dyestuff can be removed from the
waste water.
Industry - Possibility of destruction - other: None
Public at large - Possibility of recovery/recycling: Not applicable
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
