Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: If symptomatic, move to fresh air. Treat symptomatically.

Get medical attention if symptoms occur.

Emergency measure - Eyes: Any material that contacts the eye should be washed out

immediately with water. Get medical attention if symptoms

occur.

Emergency measure - Skin: Wash off with soap and water. Get medical attention if

symptoms occur.

Emergency measure - Ingestion: Seek medical advice. Never give anything by mouth to an

unconscious person.

Fire-fighting measures

Recommended extinguishing agent: Water spray, carbon dioxide (CO2), dry chemical.

Product arising from burning: Hazardous Combustion Products:  Carbon oxides, nitrogen

oxides (NOx), sulphur oxides,

Hazardous decomposition products:  hydrogen chloride

Product determined by test: N

Protective equipment: Wear self-contained breathing apparatus and protective

clothing. Fire or excessive heat may produce hazardous

decomposition products. Use water spray to cool unopened

containers.

Accidental release measures

Emergency measures in case of spillage: Shovel into suitable container for disposal. Avoid dust

formation. Clean surface thoroughly to remove residual

contamination.

Handling and storage

Handling: Avoid prolonged or repeated breathing of dust. Avoid contact

with eyes and prolonged or repeated contact with skin.

Ensure adequate ventilation. Wash thoroughly after handling.

Storage: Keep container tightly closed. Keep away from incompatible

substances (i.e., strong oxidizing agents).

Packaging of the substance and or preparation: The substance will be imported as a solid in 1-kilogram pre-

weighed sealed poly lined bags in cardboard boxes.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport code: None
Transport: None, not regulated
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Fire or high temperatures may cause decomposition. Dust may

form explosive mixture in air.

Chemical reaction with water: Experience in use and structure activity relationships

indicate that the test substance is not hazardous in contact

with water or humid air.

Dust explosion: There are no data or experience indicating this substance

presents a dust explosion hazard; however no testing has

been conducted to characterize its dust explosibility

properties.  Fines of this substance, like those of many

organic dusts, may be capable of forming explosible dust

clouds in air.  Minimize dust generation and accumulation.

Keep away from sources of ignition.  Use adequate ventilatio

n.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: It is not practical to recover or recycle the substance

Industry - Possibility of neutralisation: It is not practical to neutralize the substance

Industry - Possibility of destruction: controlled discharge: Not recommended

Industry - Possibility of destruction - incineration: A temperature of 1000 °C is expected to be sufficient to

destroy the substance.  Combustion will produce carbon

oxides, nitrogen oxides (NOx), and sulphur oxides.

Industry - Possibility of destruction - water purification: Kodak Industrie, Chalon, France:

Wastes from formulation activies are released to the the

shared industrial waste treatment facility, Station de

l'AUZIN.  Based on the log P value of -1.30 and the

estimated Henry's Law constant (H) of 2.42E-024 Pa/mole, the

SIMPLETREAT model predicts approximately 0% removal during

wastewater treatment.

Kodak Limited, Harrow, UK:

Any wastes that remain after removal at the on-site

facilities will be discharged to the Mogden municipal

treatment works.  Based on the log P value of -1.30 and the

estimated Henry's Law constant (H) of 2.42E-024 Pa/mole, the

SIMPLETREAT model predicts approximately 0% removal during

wastewater treatment.

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: It is not practical to recover or recycle the substance.

Public at large - Possibility of neutralisation: It is not practical to neutralize the substance.

Public at large - Possibility of destruction: controlled discharge: Not recommended.

Public at large - Possibility of destruction - incineration: A temperature of 1000 °C is expected to be sufficient to

destroy the substance.  Combustion will produce carbon

oxides, nitrogen oxides (NOx), and sulphur oxides.

Public at large - Possibility of destruction - water purification: Kodak Industrie, Chalon, France:

Wastes from formulation activies are released to the the

shared industrial waste treatment facility, Station de

l'AUZIN.  Based on the log P value of -1.30 and the

estimated Henry's Law constant (H) of 2.42E-024 Pa/mole, the

SIMPLETREAT model predicts approximately 0% removal during

wastewater treatment.

Kodak Limited, Harrow, UK:

Any wastes that remain after removal at the on-site

facilities will be discharged to the Mogden municipal

treatment works.  Based on the log P value of -1.30 and the

estimated Henry's Law constant (H) of 2.42E-024 Pa/mole, the

SIMPLETREAT model predicts approximately 0% removal during

wastewater treatment.

Public at large - Possibility of destruction - others: None