Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
auto-flammability
Type of information:
experimental study
Adequacy of study:
key study
Study period:
07-09 December 2015
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
The study was conducted according to an internationally recognised method. The substance is considered to be adequately characterised. Therefore full validation applies.
Qualifier:
according to guideline
Guideline:
EU Method A.15 (Auto-Ignition Temperature (Liquids and Gases))
Deviations:
no
Qualifier:
according to guideline
Guideline:
DIN 51794 (Testing of mineral oil hydrocarbons - Determination of ignition temperature)
Version / remarks:
2003
Deviations:
no
Principles of method if other than guideline:
Not applicable
GLP compliance:
no
Key result
Auto-ignition temperature:
250 °C
Atm. press.:
>= 101 135 - <= 101 276 Pa

Table 4.12/1: Auto ignition temperature – results

Experiment

Value

Ignition delay

Drops used

First test series

254

42 s

5

Second test series

252

39 s

9

Third test series

253

36 s

9

 

The lowest value of the auto ignition temperature is 252 °C. This value was determined using 9 drops of test substance. The test substance showed auto ignition after 39 seconds.

The auto ignition temperature (result of determination) is the lowest value from the lowest values of the three experiments, rounded down to a whole multiple of 5 °C. Therefore, the auto ignition temperature is stated as 250 °C.

 

Validity

Table 4.12/2: Acceptable ranges

 

Auto ignition temperature

Range

< 300 °C

difference between 3 values of the main study max. 10 K

> 300 °C

difference between 3 values of the main study max. 20 K

 

The three lowest values of the main determination lay within a range of 10 K (as required for auto ignition temperatures below 300 °C). The largest difference between measured ignition temperatures was 2 K.

Conclusions:
Auto-ignition temperature of Lavender oil is stated as 250 °C between 101.135 and 101.276 kPa..
This parameter/method is not relevant for classification, however the information is useful regarding potential additional fire hazard. No particular hazard is anticipated in normal conditions of storage.
Executive summary:

The study was conducted according to procedure and demands of EU-Method A.15 and DIN 51794. 

The auto ignition temperature was determined in three independent determinations. The lowest value of the auto ignition temperature is 252 °C. This value was determined using 9 drops of test substance. The test substance showed auto ignition after 39 seconds. The auto ignition temperature is the lowest value from the lowest values of the three experiments, rounded down to a whole multiple of 5 °C.

 

Therefore, the auto-ignition temperature of Lavender oil is stated as 250 °C (between 101135 to 101276 Pa ).

Description of key information

The test item has been determined to have an auto-ignition temperature of 250°C under the test conditions ( between 101.135 and 101.276 kPa.).

This parameter/method is not relevant for classification, however the information is useful regarding potential additional fire hazard.

No particular hazard is anticipated in normal conditions of storage

Key value for chemical safety assessment

Autoflammability / Self-ignition temperature at 101 325 Pa:
250 °C

Additional information

A non-GLP study was performed in order todetermine the auto-ignition temperature of the test substance in compliance with the EU-Method A.15 and stardard DIN 51794 listed in EU A15. 

The auto ignition temperature was determined in three independent determinations.

The lowest auto-ignition temperature of the test item was determined to be 252°C in the main test. Due to safety reasons and according to the guidelines the lowest measured temperature at which an ignition was observed was rounded to the next lower number divisible by 5.

The test substance has been determined to have an auto-ignition temperature of 250°C.