Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
experimental study
Adequacy of study:
key study
Study period:
3 November 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
The study was conducted according to an internationally recognised method, and under GLP. No deviation was reported. Test substance is adequately specified. Therefore full validation applies.
Qualifier:
according to guideline
Guideline:
OECD Guideline 104 (Vapour Pressure Curve)
Version / remarks:
2006
Deviations:
no
Qualifier:
according to guideline
Guideline:
EU Method A.4 (Vapour Pressure)
Version / remarks:
2009
Deviations:
no
GLP compliance:
yes (incl. QA statement)
Remarks:
GLP certificate (inspected on 13 to 14 Octher 2014 / signed on 8 April 2015)
Type of method:
static method
Key result
Test no.:
#1
Temp.:
ca. 20 °C
Vapour pressure:
ca. 724 Pa
Key result
Test no.:
#2
Temp.:
ca. 25 °C
Vapour pressure:
ca. 941 Pa

The calculation results are presented in the following table:

Table 4.6/1 .- Calculated values for 1/T and log P

n

Temperature T

Pressure P

Temperature T

1/T

log P

 

°C

hPa*

K

1/K

log Pa

1

20.0

7.2

293.15

0.00341122

2.8573

2

28.2

11.2

301.35

0.00331840

3.0492

3

35.2

16.0

308.35

0.00324307

3.2041

4

40.2

20.4

313.35

0.00319132

3.3096

5

48.0

28.8

321.15

0.00311381

3.4594

6

56.1

37.9

329.25

0.00303721

3.5786

7

49.2

30.3

322.35

0.00310222

3.4814

8

40.1

19.8

313.25

0.00319234

3.2967

9

35.2

15.8

308.35

0.00324307

3.1987

10

27.2

10.6

300.35

0.00332945

3.0253

11

20.1

7.2

293.25

0.00341006

2.8573

12

15.1

5.4

288.25

0.00346921

2.7324

*hPa = mbar

The parameters for the linear regression of the graph log (p) vs. 1/T are presented in the following table:

Table 4.6/2.- Linear Regression Parameters

Parameter

Value

Slope

-1993.926699

Intercept

9.66130322

Correlation coefficient r

-0.999248288

 

Using the equations below, vapour pressures at ambient temperature were calculated.

P(20 °C) = 10B * (1/293.15) + A 

P(25 °C) = 10B * (1/298.15) + A

Table 4.6/3.-Calculated Values for vapour pressure

Parameter

Value

Unit

Vapour Pressure (20 °C)

724

Pa

Vapour Pressure (25 °C)

941

Pa

 

Discussion

The vapour pressure of the test item was measured using the static method as described in EU method A.4. Twelve pairs temperature/vapour pressure were used to calculate a regression from which vapour pressure at ambient temperature could be estimated.

From the measured values, the vapour pressure of the test itemlwas calculated as 724 Pa at 20.0 °C and 941 Pa at 25 °C. The values of the heating and cooling down phase showed very good correspondence.

Therefore, the result of the study is considered valid.

Conclusions:
The vapor pressure of the test substance has been determined to be 724 Pa at 20 °C and 941 Pa at 25 °C (interpolation).
Executive summary:

The vapour pressure of the test substance was measured under GLP according to OECD 104 / EU A4 guideline using a static method.

12 individual measurements were conducted in a temperature range of 15.1 – 56.1 °C and the pairs of Temperature / Vapour pressure were used to calculate a regression from which vapour pressure at ambient temperature could be interpolated.

Note that the result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and these values may represent a limited part of the substance. Therefore the result should be considered with caution when used for subsequent assessment (worst case).

Description of key information

The vapor pressure of the test substance has been determined to be 724 Pa at 20 °C and 941 Pa at 25 °C (interpolation).

Key value for chemical safety assessment

Vapour pressure:
724 Pa
at the temperature of:
20 °C

Additional information

A fully reliable experimental study, conducted according to a recognized OECD/EC method and under GLP, is available. It is considered as a key study.

Note that the result obtained on this kind of substance should be largely influence by small amounts of volatile constituents and these values may represent a limited part of the substance. Therefore the result should be considered with caution when used for subsequent assessment (worst case).