Hydrazinecarboximidamide, 2-[(2-hydroxyphenyl)methylene]-, reaction products with 2-undecanone

Guidance on Safe Use

First-aid measures

INHALATION

Remove from further exposure.  For those providing assistance, avoid exposure to yourself or others.  Use adequate respiratory protection.  If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance.  If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.

SKIN CONTACT

Wash contact areas with soap and water.  Remove contaminated clothing.  Launder contaminated clothing before reuse.

EYE CONTACT

Flush thoroughly with water.  If irritation occurs, get medical assistance.

INGESTION

First aid is normally not required. Seek medical attention if discomfort occurs.

MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED

Itching and rash from allergic skin reaction.

INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED

The need to have special means for providing specific and immediate medical treatment available in the workplace is not expected.

Fire-fighting measures

EXTINGUISHING MEDIA

Suitable Extinguishing Media:  Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

Unsuitable Extinguishing Media:  Straight streams of water

SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE

Hazardous Combustion Products:  Incomplete combustion products, Oxides of carbon, Smoke, Fume

ADVICE FOR FIRE FIGHTERS

Fire Fighting Instructions:  Evacuate area.  Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply.  Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).  Use water spray to cool fire exposed surfaces and to protect personnel.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES

NOTIFICATION PROCEDURES

In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.

PROTECTIVE MEASURES

Avoid contact with spilled material.

ENVIRONMENTAL PRECAUTIONS

Remove debris in path of spill prior to oiling and remove contaminated debris from shoreline and water surface. Dispose of according to local regulations.  Large Spills:  Dyke far ahead of liquid spill for later recovery and disposal.  Prevent entry into waterways, sewers, basements or confined areas.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP

Land Spill:  Stop leak if you can do so without risk.  Do not touch or walk through spilled material.  Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.  Recover by pumping or with suitable absorbent.

Water Spill:  Stop leak if you can do so without risk.  Material will sink.  Remove material, as much as possible, using mechanical equipment.

Water spill and land spill recommendations are based on the most likely spill scenario for this material; however, geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction and speed may greatly influence the appropriate action to be taken.  For this reason, local experts should be consulted.  Note:  Local regulations may prescribe or limit action to be taken.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING

Avoid contact with skin. Prevent small spills and leakage to avoid slip hazard.    

Static Accumulator:   This material is not a static accumulator.

CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES

Do not store in open or unlabelled containers.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:

3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Chemical name:

(HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Labels:

9, EHS

SpecialProvisions

Inland waterway transport (UN RTDG/ADN(R))

UN number:

3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Chemical name:

(HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Labels:

9, EHS

Remarks

Marine transport (UN RTDG/IMDG)

UN number:

3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Chemical name:

(HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Labels:

9

Marine pollutant

Remarks

Air transport (UN RTDG/ICAO/IATA)

UN number:

3082

Shipping information

Proper shipping name and description:

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Chemical name:

(HYDRAZINECARBOXIMIDAMIDE, 2-[(2-HYDROXYPHENYL)METHYLENE]-, REACTION PRODUCTS WITH 2-UNDECANONE)

Labels:

9, EHS

Remarks

SpecialProvisions

Exposure controls / personal protection

ENGINEERING CONTROLS

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Control measures to consider:

No special requirements under ordinary conditions of use and with adequate ventilation.

PERSONAL PROTECTION

Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation.  Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.

Respiratory Protection:   If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate.  Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable.  Types of respirators to be considered for this material include:

No special requirements under ordinary conditions of use and with adequate ventilation.  

For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode.  Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

Hand Protection:   Any specific glove information provided is based on published literature and glove manufacturer data.  Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material include:

Chemical resistant gloves are recommended. If contact with forearms is likely wear gauntlet style gloves.  Nitrile, minimum 0.38 mm thickness or comparable protective barrier material with a high performance level for continuous contact use conditions, permeation breakthrough minimum 480 minutes in accordance with CEN standards EN 420 and EN 374.

Eye Protection:   If contact is likely, safety glasses with side shields are recommended.

Skin and Body Protection:    Any specific clothing information provided is based on published literature or manufacturer data.  The types of clothing to be considered for this material include:

Chemical/oil resistant clothing is recommended.

Specific Hygiene Measures:   Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking.  Routinely wash work clothing and protective equipment to remove contaminants.  Discard contaminated clothing and footwear that cannot be cleaned. Practice good housekeeping.

ENVIRONMENTAL CONTROLS

Comply with applicable environmental regulations limiting discharge to air, water and

soil. Protect the environment by applying appropriate control measures to prevent or limit

emissions.

Stability and reactivity

REACTIVITY:  See sub-sections below.

CHEMICAL STABILITY:  Material is stable under normal conditions.

POSSIBILITY OF HAZARDOUS REACTIONS:  Hazardous polymerization will not occur.

CONDITIONS TO AVOID:  Excessive heat. High energy sources of ignition.

INCOMPATIBLE MATERIALS:  Strong oxidisers

HAZARDOUS DECOMPOSITION PRODUCTS:  Material does not decompose at ambient temperatures.

Disposal considerations

Disposal recommendations based on material as supplied.  Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.

WASTE TREATMENT METHODS

Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.

REGULATORY DISPOSAL INFORMATION

Empty Container Warning Empty Container Warning (where applicable):  Empty containers may contain residue and can be dangerous.  Do not attempt to refill or clean containers without proper instructions.  Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed.  Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations.  

DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION.  THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.