Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation: Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. For breathing difficulties, oxygen may be necessary. Get medical attention if any discomfort continues.

Ingestion: Rinse mouth thoroughly with water. Give plenty of water to drink. Keep affected person under observation. Get medical attention if any discomfort continues.

Skin contact: Remove contaminated clothing immediately and wash skin with soap and water. Remove contaminated clothing and rinse skin thoroughly with water. Get medical attention promptly if symptoms occur after washing.

Eye contact: Continue to rinse for at least 15 minutes and get medical attention.

Fire-fighting measures

Extinguishing media: Water spray, dry powder or carbon dioxide.

Hazardous combustion products: Protection against nuisance dust must be used when the airborne concentration exceeds 10 mg/m3. Oxides of carbon.

Special protective equipment for firefighters: Self contained breathing apparatus and full protective clothing must be worn in case of fire.

Accidental release measures

Personal precautions: Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots, clothing or apron, as appropriate. Use suitable respiratory protection if ventilation is inadequate.

Environmental precautions: Avoid release to the environment.

Methods for cleaning up: No smoking, sparks, flames or other sources of ignition near spillage. Absorb spillage with

sand or other inert absorbent. Spillage may be stored as chemical waste in approved area.

Handling and storage

Usage precautions: Keep away from heat, sparks and open flame. Use mechanical ventilation in case of handling which causes formation of vapours. Handle and open container with care. Wear suitable

protective equipment for prolonged exposure and/or high concentrations of vapours, spray or mist.

Storage precautions: Protect from light, including direct sunrays. Keep containers tightly closed. Store in tightly closed original container in a dry, cool and

well-ventilated place. Store in closed original container at temperatures between 5°C and 30°C. Must not be exposed to temperatures

above 40°C.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls: Provide adequate general and local exhaust ventilation. Observe any occupational exposure limits for the product or ingredients.

Eye/face protection:Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Chemical splash goggles.

Wear tight-fitting, chemical splash goggles or face shield.

Other skin and body protection: Wear apron or protective clothing in case of contact.

Respiratory protection: If ventilation is inadequate, suitable respiratory protection must be worn. Wear a full facepiece respirator fitted with the following cartridge: High-efficiency particulate filter.

Stability and reactivity

Stability Stable at normal ambient temperatures.

Possibility of hazardous reactions:May polymerise.

Conditions to avoid Avoid heat, flames and other sources of ignition. Avoid contact with free radical initiators. Avoid contact with isocyanates and oxidising agents. Avoid contact with vinyl polymerization initiators. Avoid exposure to high temperatures or direct sunlight.

Materials to avoid Avoid contact with radical forming initiators, peroxides, strong alkalies or reactive metals to prevent exothermic polymerization.

Hazardous decomposition products: Oxides of carbon.

Disposal considerations

Waste should be treated as controlled waste. Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.