Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
flammable liquids: obsolete as covered by section 'Flash point'
Data waiving:
study technically not feasible
Justification for data waiving:
the study does not need to be conducted because the substance is a liquid
Endpoint:
pyrophoric liquids
Data waiving:
study scientifically not necessary / other information available
Justification for data waiving:
the study does not need to be conducted because the substance is known to be stable in contact with air at room temperature for prolonged periods of time (days) and hence, the classification procedure does not need to be applied
Endpoint:
substances / mixtures which in contact with water emit flammable gases
Data waiving:
study scientifically not necessary / other information available
Justification for data waiving:
other:

Description of key information

The substance, trimethoxy(vinyl)silane:

•       Is flammable (based on a measured flash point of 25.5-26°C and boiling point 123°C)

•       In contact with water does not emit a flammable gas based on structure

•       Is not pyrophoric based on structure

Key value for chemical safety assessment

Flammability:
flammable

Additional information

The flammability study is not required for liquids as flammability is assessed on the basis of flash point. The substance has a measured flash point of 25.5 - 26°C at 1013 hPa.

 

There is no indication on the basis of structure and experience in handling and use that the substance is pyrophoric (flammable in contact with air) or flammable in contact with water.

 

Therefore, in accordance with Section 1 of REACH Annex XI, there is no need to conduct further flammability testing.

 

A lower explosive limit (LEL) of 1.4vol% and an upper explosive limit (UEL) of 23.94vol% were determined for the substance in accordance with ASTM E918-83. In available secondary sources, LEL of 1.4vol% at 54°C and UEL of 19.9vol% at 82°C and LEL value of 1.1vol% were reported for the submission substance.

Justification for classification or non-classification

The substance has reliable measured flash points in the range 23-26°C (key study 25.5-26°C) and a boiling point of 123°C. These results indicate that the substance should be classified as Flammable Liquid Category 3 according to Regulation (EC) No. 1272/2008. Sources to which reliability could not be assigned indicate flash points in the range 22-28°C; some of these results would indicate a different classification.

According to Regulation (EC) No. 1272/2008 (CLP Regulations)

  • The flash point values =23°C combined with a boiling point of 123°C indicate a classification of Flam. Liq. 3, H226: Flammable liquid and vapour, according to Regulation 1272/2008.
  • A flash point value <23°C combined with a boiling point of 123°C indicates a classification of Flam. Liq. 2, H225: Highly flammable liquid and vapour, according to Regulation 1272/2008.

Flash point is sensitive to the presence of volatile impurities in the substance. Individual manufacturers will classify their product according to the flash point measured for that product.

Flammability in contact with air:

There is no evidence to suggest that the submission substance should be classified for this hazard on the basis of Regulation (EC) No. 1272/2008.

Flammability in contact with water:

There is no evidence to suggest that the submission substance should be classified for flammability in contact with water on the basis of Regulation (EC) No. 1272/2008.