Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures:

Remove contaminated clothing.

If inhaled: If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.

On skin contact: Wash thoroughly with soap and water.

On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open.

On ingestion: Rinse mouth and then drink plenty of water.

Most important symptoms and effects, both acute and delayed:

Symptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11.

Further important symptoms and effects are so far not known.

Indication of any immediate medical attention and special treatment needed:

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Fire-fighting measures

Extinguishing media:

Suitable extinguishing media: dry powder, foam.

Unsuitable extinguishing media for safety reasons: carbon dioxide.

Additional information: Avoid whirling up the material/product because of the danger of dust explosion.

Special hazards arising from the substance or mixture:

harmful vapours.

Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters:

Special protective equipment: Wear a self-contained breathing apparatus.

Further information:

The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in

accordance with official regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Avoid dust formation. Use personal protective clothing.

Environmental precautions:

Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up:

For small amounts: Pick up with suitable appliance and dispose of.

For large amounts: Contain with dust binding material and dispose of.

Avoid raising dust.

Reference to other sections:

Information regarding exposure controls/personal protection and disposal considerations can be found in section 8 and 13.

Handling and storage

Precautions for safe handling:

Breathing must be protected when large quantities are decanted without local exhaust ventilation.

Protection against fire and explosion: Avoid dust formation. Take precautionary measures against static discharges.

Conditions for safe storage, including any incompatibilities:

Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

The packed product is not damaged by low temperatures or by frost. The packed product will not be damaged by high temperatures.

Specific end use(s):

For the relevant identified use(s) listed in Section 1 the advice mentioned in this section 7 is to be observed.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not classified as a dangerous good under transport regulations
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:

Components with workplace control parameters: No occupational exposure limits known.

Exposure controls:

Personal protective equipment:

Respiratory protection: Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with medium

efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)

Hand protection: Chemical resistant protective gloves (EN 374).

Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time

according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other.

Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar

substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed

because of great diversity of types.

Eye protection: Safety glasses with side-shields (frame goggles) (e.g. EN 166)

General safety and hygiene measures:

Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is recommended.

Stability and reactivity

Reactivity:

Corrosion to metals: No corrosive effect on metal.

Reactions with water/air:

Reaction with: water

Flammable gases: no

Toxic gases: no

Corrosive gases: no

Smoke or fog: no

Peroxides: no

Reaction with: air

Flammable gases: no

Toxic gases: no

Corrosive gases: no

Smoke or fog: no

Peroxides: no

Chemical stability: The product is stable if stored and handled as prescribed/indicated.

Peroxides: 0 %. The product does not contain peroxides.

Possibility of hazardous reactions: Dust explosion hazard.

Conditions to avoid: Avoid dust formation. Avoid deposition of dust. Avoid all sources of ignition: heat, sparks, open flame.

Avoid electro-static charge.

Incompatible materials:

Substances to avoid:

strong acids, strong bases, strong oxidizing agents

Hazardous decomposition products: No hazardous decomposition products if stored and handled as prescribed/indicated.

Disposal considerations

Waste treatment methods:

Must be disposed of or incinerated in accordance with local regulations.

Contaminated packaging: Uncontaminated packaging can be re-used. Packs that cannot be cleaned should be disposed of in the same manner as the contents.