A REACH-rendelet célja, hogy javítsa az emberi egészségnek és a környezetnek a vegyi anyagok által jelentett kockázattal szembeni védelmét.
A CLP-rendelet biztosítja, hogy az Európai Unióban a munkavállalók és a fogyasztók a vegyi anyagok osztályozásán és címkézésén keresztül egyértelmű tájékoztatást kapjanak a vegyi anyagok által jelentett veszélyekről.
Osztályozási és címkézési jegyzék
A biocid termékekről szóló rendelet (BPR) célja, hogy javítsa a biocid termékek Európai Unión belüli piacának működését, az emberek és a környezet magas szintű védelmének biztosítása mellett.
Biocid termékek engedélyezése
Útmutatók és IT-eszközök
Az előzetes tájékoztatáson alapuló jóváhagyási eljárásról szóló rendelet (PIC) szabályozza egyes veszélyes vegyi anyagok behozatalát és kivitelét, és kötelezettségeket állapít meg az e vegyi anyagokat EU-n kívüli országba kivinni szándékozó vállalatok számára.
a PIC-rendelet hatálya alá tartozó vegyi anyagok jegyzéke
A foglalkozási expozíciós határértékeket (OEL) két jogszabályi keret határozza meg, amelyek a munkavállalók egészségét védő európai uniós mechanizmus szerves részét képezik.
The Waste Framework Directive aims to protect the environment and human health from the generation and management of waste and to improve efficient use of resources.
A POP-rendelet tiltja vagy szigorúan korlátozza az Európai Unióban a környezetben tartósan megmaradó szerves szennyező anyagok gyártását és használatát.
Az ECHA nyilvános konzultációt kezdeményez annak érdekében, hogy a szabályozási eljárásokhoz a lehető legszélesebb körből tájékozódjon a tudományos információkról és minden érdekelt fél megtehesse észrevételeit.
Biocid termékekről szóló rendelet
Ez egy maga nemében páratlan információforrás az Európában gyártott és Európába importált vegyi anyagokról. Részletezi az anyagok veszélyes tulajdonságait, osztályozásukat és címkézésüket, valamint a biztonságos felhasználásukra vonatkozó információkat.
Ebben a menüpontban eszközöket és gyakorlati iránymutatásokat találnak azok a vállalatok, amelyeknek a vegyi anyagokra vonatkozó uniós jogszabályokkal összefüggő feladataik vannak.
Infocards are automatically generated based on industry data. What is an infocard?
The fraction of tar acids, rich in 2,4- and 2,5-dimethylphenol, recovered by distillation of low-temperature coal tar crude tar acids.
The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.
Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.
The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.
If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.
The EC or list number is the primary substance identifier used by ECHA.
The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.
The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
More help available here.
EC / List no.: 284-895-5
CAS no.: 84989-06-0
Mol. formula: C48H60O6
The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).
This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.
The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:
To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.
More information about Classification and Labelling is available in the Regulations section of ECHA website.
Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.
The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.
If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.
It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.
More info on CLH can be found here.
If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.
If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.
Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.
Danger! According to the harmonised classification and labelling (ATP01) approved by the European Union, this substance may cause genetic defects and may cause cancer.
Additionally, the classification provided by companies to ECHA in REACH registrations identifies that this substance is toxic if swallowed, is toxic in contact with skin, causes severe skin burns and eye damage, is toxic to aquatic life with long lasting effects, causes serious eye damage and may cause an allergic skin reaction.
This section provides an overview of the calculated volume at which the substance is manufactured or imported to the European Economic Area (EU28 + Iceland, Liechtenstein and Norway). Additionally, if available, information on the use of the substance and how consumers and workers are likely to be exposed to it can also be displayed here.
The use information is displayed per substance life cycle stage (consumer use, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites or in manufacturing). The information is aggregated from the data coming from REACH substance registrations provided by industry.
For a detailed overview on identified uses and environmental releases, please consult the registered substance factsheet.
Use descriptors are adapted from ECHA guidance to improve readability and may not correspond textually to descriptor codes described in Chapter R.12: Use Descriptor system of ECHA Guidance on information requirements and chemical safety assessment.
The examples provided are generic examples and may not apply to the specific substance you are viewing. A substance may have its use restricted to certain articles or products and therefore not all the examples may apply to the specific substance. Furthermore, some substances can be found in an article, but with unlikely exposure (e.g. inside a watch) or with very low concentrations considered not to pose risks to human health or the environment.
For readability purpose, only non-confidential use descriptors occurring in more than 5% of total occurrences are displayed.
The described Product category (i.e. the products in which the substance may be used) may refer to uses as intermediate and under controlled conditions, for which there is no consumer exposure.
More help is available here.
This substance is manufactured and/or imported in the European Economic Area in 100+ tonnes per year.
This substance is used by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.
ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment. ECHA has no public registered data indicating whether or into which articles the substance might have been processed.
This substance is used in the following products: washing & cleaning products. This substance is used in the following areas: agriculture, forestry and fishing and building & construction work. This substance is used for the manufacture of: machinery and vehicles, textile, leather or fur, wood and wood products and furniture. Other release to the environment of this substance is likely to occur from: indoor use as processing aid, outdoor use as processing aid, indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. Release to the environment of this substance can occur from industrial use: formulation of mixtures.
This substance is used in the following products: coating products and polymers. This substance is used in the following areas: building & construction work. This substance is used for the manufacture of: chemicals, fabricated metal products, electrical, electronic and optical equipment, rubber products, plastic products, mineral products (e.g. plasters, cement), machinery and vehicles and furniture. Release to the environment of this substance can occur from industrial use: in the production of articles, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates) and for thermoplastic manufacture.
Release to the environment of this substance can occur from industrial use: manufacturing of the substance.
The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.
Properties of concern are calculated at four "levels" of certainty:
The following properties of concern are calculated:
The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications.
Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).
A majority of data submitters agree this substance is Skin sensitising
Under assessment as Persistent, Bioaccumulative and Toxic
This section provides links to the list of precautions (precautionary statements) and to the guidance on safe use, if they have been provided in REACH registration dossiers.
Please note: Precautionary measures and guidance on safe use concern the use and handling of the specific substance as such, not of the presence of the substance in other articles or mixtures. The precautionary measures and guidance on safe use are as submitted to ECHA by registrants under the REACH Regulation. Information on precautionary measures and the safe use is submitted by the registrant of a substance and the registrant is solely responsible for its accuracy and completeness.
The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.
The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.
InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
European Chemicals Agency
Bár az ECHA sok anyagot az ön nyelvén is rendelkezésre bocsát az interneten, az oldal egy része csak angolul érhető el. Bővebben az ECHA többnyelvűségre irányuló gyakorlatáról.
Bezárás Ez az üzenet ne jelenjen meg újra.
Üdvözöljük az ECHA weboldalán! Az oldal az Internet Explorer 7 (és korábbi verziók) alatt nem teljes mértékben támogatott. Kérjük, frissítse Internet Explorer böngészőjét egy újabb verzióra!
Ez a weboldal cookie-kat használ a legjobb felhasználói élmény biztosítása érdekében.
Bezárás További információ a cookie-k használatáról.