Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 232-136-3 | CAS number: 7787-93-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Hydrolysis
Administrative data
Link to relevant study record(s)
Description of key information
Hydrolysis half-life: <5 seconds at 25°C and pH 4, 7 and 9 (analogue read-across).
Key value for chemical safety assessment
Additional information
No hydrolysis study is available for the submission substance. However, reliable studies according to OECD 111 are available for other related dichlorosilane substances:
dichloro(dimethyl)silane, dichloromethyl(3,3,3-trifluoropropyl)silane and dichloro(diphenyl)silane. These substances are fully hydrolysed within a few minutes at pH 4, 7 and 9 and 1.5°C. This read-across is made in the context of evidence from other available data for chlorosilane structural analogues, as shown in the table below.
Dichloro(3 -chloropropyl)methylsilane contains the reactive group Si-Cl. Strong evidence based on read-across within the category of chlorosilanes is available to indicate that the Si-Cl bonds will rapidly hydrolyse to Si-OH with a half-life of ≤17 seconds at pH 4, 7 and 9 and 1.5°C (see below). The hydrolysis products are (3 -chloropropyl)methylsilanediol and hydrogen chloride.
For six substances, quantitative half-life data at 1.5ºC are available; a study with one further substance at 50ºC found no parent substance to be present at t0, indicating extremely rapid hydrolysis. The measured half-lives at pH 4, 7 and 9 and 1.5ºC are all ≤17 s.
Table 4.1.2: Hydrolysis data for chlorosilanes
CAS |
Name |
Result – half-life at pH 4 (seconds) |
Result – half-life at pH 7 (seconds) |
Result – half-life at pH 9 (seconds) |
Temperature |
Klimisch |
75-77-4 |
Chlorotrimethylsilane |
7 |
11 |
8 |
1.5 ± 0.5˚C |
2 |
75-78-5 |
Dichloro(dimethyl)silane |
10 |
17 |
7 |
1.5 ± 0.5˚C |
2 |
75-79-6 |
Trichloro(methyl)silane |
7 |
9 |
6 |
1.5 ± 0.5˚C |
2 |
80-10-4 |
Dichloro(diphenyl)silane |
6 |
10 |
8 |
1.5 ± 0.5˚C |
2 |
675-62-7 |
Dichloromethyl(3,3,3-trifluoropropyl)silane |
8 |
12 |
9 |
1.5 ± 0.5˚C |
2 |
5578-42-7 |
Dichlorocyclohexylmethylsilane |
<<27 min[1] |
<<27 min[2] |
<<27 min[3] |
27°C |
2 |
4518-98-3 |
1,1,2,2-tetrachloro-1,2-dimethyldisilane |
8 |
7 |
7 |
1.5 ± 0.5˚C |
2 |
13154-25-1 |
Chlorotri(3-methyl-propyl)silane |
Not quantified[4] |
Not quantified[5] |
Not quantified[6] |
50˚C |
1 |
[1]No parent substance was detected when the first measurement was taken.
[2]No parent substance was detected when the first measurement was taken.
[3]No parent substance was detected when the first measurement was taken.
[4]In this test the t0analysis (50˚C) showed a recovery <LOD, suggestive of an extremely rapid reaction.
[5]In this test the t0analysis (50˚C) showed a recovery <LOD, suggestive of an extremely rapid reaction.
[6]In this test the t0analysis (50˚C) showed a recovery <LOD, suggestive of an extremely rapid reaction.
Hydrolysis half-lives of 10 seconds at pH 4, 17 seconds at pH 7 and 7 seconds at pH 9 and 1.5°C were determined for dichloro(dimethyl)silane in accordance with OECD 111 (Dow Corning Corporation 2001).
Hydrolysis half-lives of 8 seconds at pH 4, 12 seconds at pH 7 and 9 seconds at pH 9 and 1.5°C were determined for dichloromethyl(3,3,3-trifluoropropyl)silane in accordance with OECD 111 (Dow Corning Corporation 2001).
Hydrolysis half-lives of 6 seconds at pH 4, 10 seconds at pH 7 and 8 seconds at pH 9 and 1.5°C were determined for dichloro(diphenyl)silane in accordance with OECD 111 (Dow Corning Corporation 2001).
Since the hydrolysis was so rapid relative to the timescale of the analytical measurement, there was insufficient data to determine rate constants for the hydrolysis reactions of these chlorosilanes using regression modelling. However, the data was adequate for estimating the upper limit of t1/2. Half-lives were estimated as 0.1t, where t=time for complete hydrolysis.
Measured hydrolysis half-lives of <<27 mins at pH 4, pH 7 and pH 9 and 27°C were determined for dichlorocyclohexylmethylsilane in a study conducted according to generally acceptable scientific principles (Haas 2012). Only a preliminary study was carried out and a more precise knowledge of the half-life is needed for use in the chemical safety assessment. Therefore, this data is not used as part of the weight-of-evidence.
Given the very rapid hydrolysis rates in water (≤17 seconds at 1.5°C and pH 4, 7 and 9) observed for all tested dichlorosilanes, and the lack of significant variation in the half-lives for the different substances, it is considered appropriate to read-across this result to dichloro(3-chloropropyl)methylsilane.
Reaction rate increases with temperature, and therefore hydrolysis will be faster at 25ºCand at physiologically-relevant temperatures. Under ideal conditions, hydrolysis rate can be recalculated according to the equation:
DT50(XºC) = DT50(T°C) *e(0.08.(T-X))
Where T = temperature for which data are available and X = target temperature.
Using the longest half-life measured for the dichlorosilanes at 1.5ºC and pH 7 (17 seconds) the estimated hydrolysis half-life at 25ºC and pH 7 is 2.6 seconds. However, it is not appropriate or necessary to attempt to predict accurately when the half-life is less than 5-10 seconds. As a worst-case it can therefore be considered that the half-life of the substance at pH 7 and 25°C is approximately 5 seconds.
The estimated hydrolysis half-life at 37.5ºC and pH 7 (relevant for lungs and blood andin vitroandin vivo(intraperitoneal administration) assays) is 1 second, so worst case approximately 5 seconds.
Using the longest half-life measured for the dichlorosilanes at 1.5ºC and pH 4 (10 seconds)the estimated hydrolysis half-life at 37.5ºC and pH 4 is 0.6 second, so worst case approximately 5 seconds.
As the hydrolysis reaction may be acid or base catalysed, the rate of reaction is expected to be slowest at pH 7 and increase as the pH is raised or lowered (this is consistent with the data presented above). The half-life at pH 4 and 37.5°C is estimated to be around 5 s, therefore, the half-life at pH 2 and 37.5°C (relevant for oral exposure) is also estimated as 5 s as a worst case. At 37.5ºC and pH 5.5 (relevant for dermal exposure), the hydrolysis half -life is estimated to be in between the half-lives at pH 4 and pH 7 at 37.5ºC, and thus also approximately 5 seconds as a worst case.
Hydrolysis in air
The above hydrolysis studies were carried out with the substance dissolved in water. Consideration of the rates of reaction with moisture in air is relevant for inhalation exposure assessment. Experience in handling and use, as well as the extremely rapid rates observed in the available water-based studies, would suggest that rates of reaction in moist air will also be rapid. If any unreacted chlorosilane were to reach the airways, it would rapidly hydrolyse in this very moist environment.
A simulated nose-only exposure study (Houghton 2013) has been conducted to determine hydrolytic stability of dichloro(dimethyl)silane under conditions typical of nose-only vapour inhalation exposures. The vapour generation was on 1 day for 3 hrs 14 minutes; concentrations of parent material were measured at 30 minute intervals using gas chromatography (GC). The nominal concentration was 50 ppm. The mean temperature was 21.6°C and the relative humidity (RH) was 57%. 24% parent concentration remaining in the test atmosphere relative to nominal concentration was measured by GC. This indicates 76% hydrolysis of the parent substance had taken place by the time the test atmosphere reached the GC. It was concluded that at least 20-29% of the parent test article would be present in the breathing zone relative to the nominal concentration under typical conditions used for nose-only inhalation exposure of rats. It is therefore possible to expose rats in a nose-only study to parent chlorosilane, because the transit time from the substance reservoir to the nose is very rapid (<1 second), however, this is not considered to be representative of human exposure conditions.
This represents extremely rapid hydrolysis because the time taken for the test substance to reach the GC was very short (13-15 seconds). The authors of this summary have used the information from this study to estimate a half-life for dichloro(dimethyl)silane in air of approximately 7 seconds (95% confidence limit = 3 -11 seconds), which is comparable to the half-life in water.
In a study of the acute toxicity to rats via the inhalation route (Dow Corning Corporation 1997), dichloro(dimethyl)silane was quantified in the exposure chamber using Thermal Conductivity Detection and identification was confirmed using GC/MS. The relative humidity (RH) in the exposure chamber was 30 -35%. The mean measured concentrations in the exposure chambers during exposure (1 hour) was only about 15% of the nominal concentration of dichloro(dimethyl)silane. The test atmosphere contained an amount of chloride consistent with the nominal concentration of test article as determined via electrochemical detection. Thus, the majority of parent had hydrolysed in the test atmosphere at only 30-35% relative humidity.
Similarly, in a study to assess stability of dichloro(dimethyl)silane vapour in air using gas-sampling FTIR (Dow Corning 2009), dichloro(dimethyl)silane was observed to be extremely unstable in high relative humidity atmospheres. At 75% relative humidity (RH)level, a stable test atmosphere of the substance could not be generated. In dry air (<5% RH), the substance had achieved 28% loss after 1 hour and 71% loss after 3.2 hours.
The significant extent of chlorosilane hydrolysis demonstrated in the studies with dichloro(dimethyl)silane is in good agreement with the theoretical capacity for hydrolysis in air under conditions typical of a rat repeated exposure test.
Theoretically, air at 20°C and 50% relative humidity would have more than 100 times the amount of water necessary for complete hydrolysis of dichloro(3 -chloropropyl)methylsilane:
Water content of air at 20°C and 100% relative humidity = 17.3 g/m3
Assuming a 50% humidity, the water content would be 8.65g water/m3= 8.65 mg water/l
Molecular weight of water = 18 g/mole; So 8.65 mg water/l = 0.48 mmol water/l
50 ppm HCl is the estimated upper exposure limit based on HCl corrosivity for a repeated dose inhalation toxicity exposure test.
As dichloro(3 -chloropropyl)methylsilane has two hydrolysable Cl groups, 25 ppm of the substance would produce 50 ppm HCl, so 25 ppm of dichloro(3 -chloropropyl)methylsilane is the upper exposure limit for a repeated dose inhalation toxicity test.
Molecular weight of dichloro(3 -chloropropyl)methylsilane = 194.56 g/mol;
1 mole of an ideal gas under relevant conditions (standard pressure and temperature 25°C) has a volume of 24.45 l. So 25 ppm * 194.56 g/mol gives mass of substance per mole of air, then dividing by 24.45 gives the mass of substance per volume of air.
So 25 ppm dichloro(3 -chloropropyl)methylsilane ≡ 195.86 mg/m3
Therefore, it can be concluded that the registered substance will hydrolyse very rapidly under conditions relevant for environmental and human health risk assessment and no further testing is necessary. It is not possible or necessary to attempt a quantitative prediction of rate or half-life because the chemical safety assessment is not sensitive to this uncertainty within this range. Additional information is given in a supporting report (PFA 2013ab) attached in Section 13 of the REACH technical dossier.
The hydrolysis products for the present substance are (3-chloropropyl)methylsilanediol and hydrochloric acid.
Hydrolysis of the read-across substance (3-chloropropyl)dimethoxymethylsilane (CAS 18171-19-2)
Data for the substance(3-chloropropyl)dimethoxymethylsilane(CAS 18171-19-2) are read-across to the submission substance dichloro(3-chloropropyl)methylsilane for appropriate endpoints (see CSR Section 1.4). The rate of hydrolysis half-life, presence of a common functional group (3-chloropropyl) and silanol hydrolysis product of the two substances is relevant to this read-across, as discussed in the appropriate Sections of the CSR for each endpoint.
For (3-chloropropyl)dimethoxymethylsilane, hydrolysis half-lives of 0.1 h at pH 4, 1.3 h at pH 7 and 0.03 h at pH 9 and 20 -25°C were obtained using a validated QSAR estimation method. The result is considered to be reliable.
The hydrolysis products are 3-chloropropylmethylsilanediol and methanol.
Hydrolysis of the read-across substance (3-chloropropyl)diethoxymethylsilane (CAS 13501-76-3)
Data for the substance(3-chloropropyl)diethoxymethylsilane(CAS 13501-76-3) are read-across to the submission substance dichloro(3-chloropropyl)methylsilane for appropriate endpoints (see CSR Section 1.4).The rate of hydrolysis half-life, presence of a common functional group (3-chloropropyl) and silanol hydrolysis product of the two substances is relevant to this read-across, as discussed in the appropriate Sections of the CSR for each endpoint.
For (3-chloropropyl)diethoxymethylsilane, hydrolysis half-lives of 0.4 h at pH 4, 9.5 h at pH 7 and 0.27 h at pH 9 and 25°C were determined for the substance using validated QSAR estimation method.
The hydrolysis products are 3-chloropropylmethylsilanediol and ethanol.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.