Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative self-ignition temperature (solids)
Type of information:
experimental study
Adequacy of study:
key study
Study period:
From May 24, 2061 to May 25, 2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
test procedure in accordance with national standard methods
Qualifier:
according to guideline
Guideline:
other: UN-Test Method N.4
Principles of method if other than guideline:
Tests are performed to determine if the substances in a 25 mm or 100 mm sample cube, at test temperature of 100, 120, or 140°C, undergo spontaneous ignition or dangerous self-heating, which is indicated by 60°C rise in temperature over the oven temperature within 24 hours.
GLP compliance:
not specified
Specific details on test material used for the study:
Batch 145
Appearance white granula solid
Key result
Remarks on result:
other: no self ignition observed under test conditions

Sample cube                    Temperature oven                 Max. Temp. sample                  Result: Self-heating yes/no


100 mm                             140°C                                       138°C                                           No


The classsification, based on the test results of the self-heating substances, is to be made according to the Regulation (EC) 1272/2008 of the Europeen Parliament and of the Council on Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Conclusions:
Under the study conditions, no self-ignition temperature could be determined and the substance was not classified as a self-heating substance.
Executive summary:

A study was conducted to determine the self-ignition temperature of the test substance according to the test method N.4 (test method for self-heating substances) as described in the UN Recommendations of Dangerous Goods, Manual of Tests and Criterian part III, sub-section 33.3.1.6. Tests are performed to determine if the substances in a 25 mm or 100 mm sample cube, at test temperatures of 100, 120, or 140°C, undergo spontaneous ignition or dangerous self-heating, which is indicated by 60°C rise in temperature over the oven temperature within 24 hours. The test substance was filled to the brim of the samples cube. The sample cube was housed in a cubic container made from a stainless steel net and was stored at the selected temperature in the center of a hot-air circulated drying cabinet. The temperature of the sample and the oven was recorded during the heat storage. A positive result was obtained if spontaneous ignition occured or if the temperature of the sample exceeded the oven temperature by 60°C during the 24 hour test time. Otherwise, the result was considered negative. Under the study conditions, no self-ignition temperature could be determined and the substance was not classified as a self-heating substance (Kintrup 2016).

Description of key information

The relative self-ignition temperature was determined according to the UN Test Method N.4 (Kintrup, 2016)

Key value for chemical safety assessment

Additional information