Registration Dossier

Administrative data

First-aid measures

General information Avoid chance of exposure by any feasible way.
After inhalation: Move the affected person to fresh air.If breathing becomes irregular or ceases, apply mouthtomouth resuscitation or artifical respiration immediately. Get medical attention.
After skin contact: Immediately remove contaminated clothing, wash off the skin with plenty of water.
After eye contact: Rinse the eyes with water for several minutes with eyelids open wide. Having rinsed the eyes, obtain ophthalmologic attention as soon as possible.
After swallowing: Wash out the mouth with plenty of water, give plenty of water to drink, then obtain medical attenton immediately.
Information for doctor The physician must be informed on the time, type and extent of exposure. If needed, show the safety data sheet to the physician.

Fire-fighting measures

Suitable extinguishing media: Available extinguishing media: water spray, extinguishing powder, carbon dioxid, foam.
Unsuitable extinguishing media: Full waterjet are not suitable for extinguishing.
Special hazards arising from the substance or mixture Substance is combustible. Combustion products: carbonmonoxide/ dioxide.
Advice for firefighters: Outdoors stay on the weatherside and extinguish from there. In closed places, and in case of wreck, wear fireproof working

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Only the trained personnel in charge of release is allowed to bepresent at the site of spilling, wearing the prescribed protective equipments.
Environmental precautions: Hinder the spilled substance from entering the soil, sewers or living water.
Methods and material for containment and cleaning up: Collect spilt substance aspiring to the lowest possible dustlevel. Put the collected substance into adequately labelled empties and transport them to the site of disposal, then wash the contaminated area with plenty of water.

Handling and storage

Precautions for safe handling: Handled it the compliance with good industrial hygiene and safety procedures. All work processes must always be designed so minimize or exclude the risk of exposure. It is necessary to wash a hand and a face with water and a soap after the work made with the substance.
Avoid: dust formation; deposition.
Conditions for safe storage, including any incompatibilities: Store it in a cool, dry, wellventilated, free from direct sunlight place. Storage in a tightly fitting package, in accordance with the Intermediate Storage and Packing Instruction.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls Closed system, specific processes (eg. sampling) usage of local exhaust ventilation.
Individual protection measures / personal protective equipment: The personal protective equipment for the working process are determined by internal standards.
Eye/face protection: Wear closed protection glasses.
Skin protection: Closed protective clothing against particulate matter.
Hand protection: Protective gloves made of nitrile and butyl and neopren.
Respiratory protection: P3 dust mask.
Environmental exposure controls In case of proper handling and using no environmental damage may be expected.

Stability and reactivity

Chemical stability: Stable under normal circumstances.
Possibility of hazardous reactions: Danger of electrostatic charge. Danger of dust explosion. May react with substance in 10.5 incompantibility.
Conditions to avoid: Sensitive to the following physical effects: light, heat.
Incompatible materials: acids, basics, strong oxidisers

Disposal considerations

Suggestions for disposal procedures of the substance/product: Incineration in a special waste incineration plant.
Suggestions for disposal procedures of contaminated packaging (vessels): Flammable empties must be incinerated in waste increation plant, in compliance with local regulations.