Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: If signs/symptoms develop, remove person to fresh air. If
signs/symptoms persist, get medical attention.
Emergency measure - Eyes: Get immediate medical attention. Immediately flush eyes with

large amounts of water for at least 15 minutes.
Emergency measure - Skin: Wash affected area with soap and water. If signs/symptoms
develop, get medical attention.
Emergency measure - Ingestion: Get immediate medical attention. Do not induce vomiting
unless instructed to do so by medical personnel. Give victim

two glasses of water. Never give anything by mouth to an
unconscious person.

Fire-fighting measures

Recommended extinguishing agent: Non-combustible. Choose material suitable for surrounding
fire.

Product arising from burning: Carbon monoxide. Carbondioxide. Hydrogen fluoride. Toxic
Vapor, Gas, Particulates.

Product determined by test: N

Protective equipment: Wear full protective clothing, including helmet, self-
contained, positive pressure or pressure demand breathing
apparatus, bunker coat and pants, bands around arms, waist
and legs, face mask, and protective covering for exposed
areas of the head.

Accidental release measures

Emergency measures in case of spillage: Ventilate the area with fresh air.

Collect as much of the spilled material as possible. Use wet

sweeping compound or water to avoid dusting. Sweep up.
Clean up residue. Place in a closed container approved for
transportation by appropriate authorities.

Handling and storage

Handling: Avoid eye contact.

The following should be worn alone or in combination, as
appropriate, to prevent eye contact : Indirect Vented
Goggles.


Avoid skin contact.

The following glove material(s) are recommended : neoprene,
nitrile rubber.


Avoid breathing of dust.

Provide appropriate local exhaust ventilation at
transferpoints and when product is heated.Use general
dilution ventilation and/or local exhaust ventilation to
control airborne exposures.If ventilation is not adequate,
use respiratory equipment.

Select one of the following approved respirators based on
airborne concentration of the coontaminants and in
accordance with regulations : Half facepiece or fullface
air-purifying respirator with N95 particulate prefilters.

Use a positive pressure supplied-air respirator if there is
a potential for exposure from an uncontrolled release,
exposure levels are not known, or under any other
circumstances where air-purifying respirators may not
provide adequate protection.


Wash hands after handling and before eating. Do not eat,
drink or smoke when using this product. Wash exposed areas
thoroughly with soap and water.

Storage: Store away from heat. Store away from areas where product
may come into contact with food or pharmaceuticals.

Packaging of the substance and or preparation: Substance :

Polyethylene bag inside a drum coated with an epoxy
material.


Preparations :

12.5 kg polyethylene (HDPE) bags as such or additionally
packed in cardboard boxes (2 x 12.5 kg) or in returnable
HDPE palletboxes (48 x 12.5 kg)

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: UN 3278
Transport: UN 3278 Organophosphorus compound, toxic, n.o.s.

([nonafluoro-N-Methyl-1-butanesulfonamide] triphenyl
(phenylmethyl)phosphonium salt), class 6.1, pg III
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Not known.

Chemical reaction with water: Not anticipated.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: The substance can be recovered by re-using eventual non-
conformal material (fluorolastomer).

Industry - Possibility of neutralisation: We expect that both the anion and cation would bind fairly
strongly to solids in wastewater and that after binding,
these now insoluble particles will precipitate out.

We think that they would be removed when the sludge is
wasted.

So, we think that possible toxicity will be mitigated
through removal.


A soil adsorption/desorption study (planned for completion
of the VIIA dossier) on this substance will confirm or
reject this hypothesis.

Industry - Possibility of destruction: controlled discharge: Cured fluoroelastomer compounds can be landfilled. (650)

Industry - Possibility of destruction - incineration: Pure substance and non-cured fluorochemical compounds should

be incinerated in halogen specific incinerators (664). The
combustion product will include HF.

Industry - Possibility of destruction - water purification: Not applicable.


We expect that both the anion and cation would bind fairly
strongly to solids in wastewater and that after binding,
these now insoluble particles will precipitate out.

We think that they would be removed when the sludge is
wasted.

So, we think that possible toxicity will be mitigated
through removal.


A soil adsorption/desorption study (planned for completion
of the VIIA dossier) on this substance will confirm or
reject this hypothesis.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Not applicable.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable.

Public at large - Possibility of destruction - others: Not applicable.