Registration Dossier

Administrative data

First-aid measures

Not specifically necessary. Observance of good industrial hygiene is recommended.
No episodes of damage to health ascribable to the product have been reported.

Fire-fighting measures

SUITABLE EXTINGUISHING EQUIPMENT
The extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray.
UNSUITABLE EXTINGUISHING EQUIPMENT
None in particular.

HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products.

Advice for firefighters
GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137).

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Block the leakage if there is no hazard.
Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent any contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.

Environmental precautions
The product must not penetrate into the sewer system or come into contact with surface water or ground water.

Methods and material for containment and cleaning up
Collect the leaked product into a suitable container. If the product is flammable, use explosion-proof equipment. Evaluate the compatibility of the container to be used, by checking section 10. Absorb the remainder with inert absorbent material.
Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions set forth in point 13.

Handling and storage

Precautions for safe handling
Before handling the product, consult all the other sections of the material safety data sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use.

Conditions for safe storage, including any incompatibilities
Keep the product in clearly labelled containers. Keep containers away from any incompatible materials.

Specific end use(s)
cosmetic and cosmetic formulation

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not applicable
The product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.

Exposure controls / personal protection

HAND PROTECTION
None required.

SKIN PROTECTION
None required.

EYE PROTECTION
None required.

RESPIRATORY PROTECTION
None required.

ENVIRONMENTAL EXPOSURE CONTROLS
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.

Stability and reactivity

Reactivity
There are no particular risks of reaction with other substances in normal conditions of use.

Chemical stability
The product is stable in normal conditions of use and storage.

Possibility of hazardous reactions
No hazardous reactions are foreseeable in normal conditions of use and storage.

Conditions to avoid
None in particular. However the usual precautions used for chemical products should be respected.

Incompatible materials
Information not available

Hazardous decomposition products
Information not available

Disposal considerations

Waste treatment methods
Neat product residues should be considered special non-hazardous waste.
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.