Registration Dossier

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point, other
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2015
Reliability:
1 (reliable without restriction)
Qualifier:
according to
Guideline:
EU Method A.9 (Flash-Point)
Deviations:
no
GLP compliance:
yes
Type of method:
closed cup
Flash point apparatus:
Setaflash apparatus
Specific details on test material used for the study:
Appearance/Physical state: White solid
Batch: 7061415
Purity: 99.96%
Expiry date: 13 February 2019
Storage conditions: Room temperature in the dark
Flash point:
199 °C
Atm. press.:
102 kPa
Interpretation of results:
other: not classified
Conclusions:
The flash point of the test item has been determined to be 199 ± 2 °C.
Executive summary:

The determination was carried out using a closed cup flash point tester∗, using a procedure designed to be compatible with Method A.9 Flash Point of Commission Regulation (EC) No 440/2008 of 30 May 2008. An aliquot (2 g for temperatures up to 100 ºC and 4 g for temperatures above 100 ºC) of the test item was transferred to the sample cup of the Setaflash 30000-0 tester. The sample was heated and allowed to equilibrate at the set temperature. The test flame was introduced into the sample cup for approximately 2½ seconds by sliding the cup shutter open. Observations were made for ignition of the vapor. If no ignition occurred, the temperature was increased and the test flame re-introduced. This was repeated until the lowest reproducible temperature at which a flash occurred, using a fresh sample, was determined. The flash point of the test item has been determined to be 199 ± 2 °C at Atmospheric pressure: 102.0 kPa.

Description of key information

Key value for chemical safety assessment

Additional information