Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Endpoint summary

Currently viewing:

Administrative data

Description of key information

Additional information

APPEARANCE AND PHYSICOCHEMICAL STATE

Direct Yellow 086 (DY086) is a red brown organic powder at 20 °C and 1013 Pa. The volumetric distribution of particles size shows that the d(0.5) is ca 59 μm; ca 2 % of particles have a diameter lower than 4 μm.

The test item thermal behaviour has been assayed using the Differential Scanning Calorimetry (DSC). The imbibition water/solvent release was observed between 25 - 200 °C, followed by exothermic reaction between 323 - 429 °C (onset at 324.7 °C, enthalpy 102.6 J/g).

No melting and boiling points were determined. Based on thermal behaviour, the vapour pressure is expected to be negligible.

 

SOLUBILITY AND PARTITION COEFFICIENT

The partition coefficient of DY086 has been determined by means of shake flask method; the average of logPow resulted to be -2.9 20 °C and at pH of 6.80. Although the values recorded are outside of the applicability domain for the test method, the rusults can be considered as reliable and representative for the tested substance. The study outcomes are indicative of a high affinity with the water phase, respect than the octanol one.

The water solubility was performed following the recommendations of the OECD method 105 and the average between 24, 48 and 72 hours resulted to be 71.33 g/l at 20 °C and pH 9.14, confirming the high affinity with water phase, rather than the octanol one.

PHYSICAL HAZARDS

DY086 is not expected to not ignite and propagate combustion; no chemical groups associated with oxidising properties are present in the molecule.

The substance does not meet the criteria to be considered as flammable/explosive/oxidising.