Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- substances / mixtures which in contact with water emit flammable gases
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 1996-01-04 to 1996-05-09
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: see 'Remark'
- Remarks:
- GLP study in accordance with recognised test guideline but: Lot/batch No.: not stated Expiration date of the lot/batch: not stated NOTE: study deemed acceptable because spectral data for A-3622 are available, covering before and after the test period - see section 1.4 Analytical Information.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.12 (Flammability (Contact with Water))
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- - Substance type: Organic
- Physical state: Solid
- Composition of test material, percentage of components: relative proportions components 1, 2 and 3 are 100:60:40 - Test procedure:
- step 4
- Remarks on result:
- only step 4 of test procedure conducted because substance does not react violently with water
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- The test item is non-flammable when in contact with water.
- Executive summary:
Flammability in contact with water was determined according to EEC Method A12.
Evolution of gases was not observed.
The test item is non-flammable when in contact with water.
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 1996-01-04 to 1996-05-09
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: see 'Remark'
- Remarks:
- GLP study in accordance with recognised test guideline but: Lot/batch No.: not stated Expiration date of the lot/batch: not stated NOTE: study deemed acceptable because spectral data for A-3622 are available, covering before and after the test period - see section 1.4 Analytical Information.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- - Substance type: Organic
- Physical state: Solid
- Composition of test material, percentage of components: relative proportions components 1, 2 and 3 are 100:60:40 - Test procedure:
- burning rate test: preliminary screening test
- Moisture (wt %):
- 0.2
- Remarks on result:
- other: The test material formed a yellow-brown melt, which sustained a flame that propogated along a 40 mm length of the pile in approximately 2.5 minutes before extinguishing.
- Interpretation of results:
- non flammable
- Remarks:
- Migrated information
- Conclusions:
- The test item is non-flammable when ignited.
- Executive summary:
Flammability on ignition was determined according to EEC Method A10.
The test item is non-flammable when ignited.
- Endpoint:
- pyrophoric solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 1996-01-04 to 1996-05-09
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: see 'Remark'
- Remarks:
- GLP study in accordance with recognised test guideline but: Lot/batch No.: not stated Expiration date of the lot/batch: not stated NOTE: study deemed acceptable because spectral data for A-3622 are available, covering before and after the test period - see section 1.4 Analytical Information.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.13 (Pyrophoric Properties of Solids and Liquids)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- - Substance type: Organic
- Physical state: Solid
- Composition of test material, percentage of components: relative proportions components 1, 2 and 3 are 100:60:40 - Test procedure:
- ignition time on contact with air
- Remarks on result:
- no ignition within 5 minutes
- Interpretation of results:
- not classified based on GHS criteria
- Conclusions:
- The test item is non-pyrophoric.
- Executive summary:
Flammability in contact with air was determined according to EEC Method A13.
The test item did not spontaneously ignite during dropping or within five minutes of settling in any of the replicate tests.
The test item is non-pyrophoric.
Referenceopen allclose all
Evolution of gases was not observed.
The test material formed a yellow-brown melt, which sustained a flame that propogated along a 40 mm length of the pile in approximately 2.5 minutes before extinguishing.
The test item did not spontaneously ignite during dropping or within five minutes of settling in any of the replicate tests.
Description of key information
Flammability:
The test material formed a yellow-brown melt, which sustained a flame that propogated along a 40 mm length of the pile in approximately 2.5 minutes before extinguishing. The test item is non-f1ammable with respect to this test.
Flammability in contact with water:
The test item is non-flammable when in contact with water.
Pyrophoric solids:
The test item did not spontaneously ignite during dropping or within five minutes of settling. The test item is non-pyrophoric.
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
Flammable solids:
The test material formed a yellow-brown melt, which sustained a flame that propogated along a 40 mm length of the pile in approximately 2.5 minutes before extinguishing.
Therefore in accordance with Regulation (EC) No. 1272/2008 section 2.7.2.1, this substance should not be classified as flammable solids.
Flammability in contact with water:
The test item is non-flammable when in contact with water tested according to EC A12.
Therefore, in accordance with Regulation (EC) No. 1272/2008 section 2.12.2.2, the substance is not classified as a substance which in contact with water emits flammable gases.
Pyrophoric solids:
The test item did not spontaneously ignite during dropping or within five minutes of settling.
Therefore, in accordance with Regulation (EC) No. 1272/2008 table 2.10.1, the substance should not be classified as pyrophoric solids.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.