Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 600-065-0 | CAS number: 1003218-40-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- November 27, 2017 - January 31, 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 018
- Report date:
- 2018
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 492 (Reconstructed Human Cornea-like Epithelium (RhCE) Test Method for Identifying Chemicals Not Requiring Classification and Labelling for Eye Irritation or Serious Eye Damage)
- Version / remarks:
- July 28, 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: DB-ALM Protocol No. 164: Ocular Irritation Assay for Chemicals using EpiOcular™ EIT,
- Version / remarks:
- September 14, 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- other: EpiOcular Eye Irritation Test (OCL-200-EIT) for the prediction of acute ocular irritation of chemicals; For use with MatTek Corporation`s Reconstructed Human EpiOcular Model; MatTek Corporation
- Version / remarks:
- June 29, 2015
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- 2,3-difluoro-1-propoxy-4-{4-[(1s,4r)-4-propylcyclohexyl]cyclohex-1-en-1-yl}benzene
- EC Number:
- 600-065-0
- Cas Number:
- 1003218-40-3
- Molecular formula:
- C24H34F2O
- IUPAC Name:
- 2,3-difluoro-1-propoxy-4-{4-[(1s,4r)-4-propylcyclohexyl]cyclohex-1-en-1-yl}benzene
Constituent 1
- Specific details on test material used for the study:
- TREATMENT OF TEST MATERIAL PRIOR TO TESTING
- Treatment of test material prior to testing: No pre-treatment, the test item was applied neat to the tissues.
Test system
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL: 50 mg per tissue
NEGATIVE / VEHICLE CONTROL: 50 µL per tissue
Sterile deionized water was used as negative control.
POSITIVE CONTROL: 50 µL per tissue
Designation: Methyl acetate
Supplier: MatTek In Vitro Life Science Laboratories
Lot-No.: 032817ISA
Catalog #: TC-MA
Purity (GC): 99.7%
Appearance: Colorless liquid
Expiration date: March 28, 2018
Storage: 15 to 30°C - Duration of treatment / exposure:
- 6 hours
- Number of animals or in vitro replicates:
- in vitro: duplicate design
- Details on study design:
- Controls
Negative/Vehicle Control: Sterile deionized water
Positive Control: Methyl acetate, MatTek In Vitro Life Science Laboratories, Lot-No 032817ISA, Expiration date March 28, 2018
Number of Replicates
The test item as well as the positive and negative control were tested in batch-duplicates. Therefore, a total number of six tissues was used in this study.
Preparation
On day of receipt, the tissues were equilibrated in their 24-well shipping container to room temperature for about 15 minutes. Afterwards the tissues were removed from the shipping container using sterile forceps and transferred to 6-well plates containing 1 mL pre-warmed (37°C) assay medium. Any agarose adhering to the inserts was removed by gentle blotting on gauze or paper towel. Afterwards, the tissues were incubated at 37°C and 5% CO2 overnight (16-24 hours) without medium exchange.
Pre-Treatment
After the overnight incubation, the tissues were pre-wetted with 20 µL DPBS and incubated at 37°C and 5% CO2 for 30 minutes (± 2 minutes).
Treatment
After the 30 minute DPBS pre-treatment, the negative and the positive control were tested by applying 50 µL topically on the EpiOcular tissues. The solid test item was tested by evenly applying 50 mg topically on the EpiOcular tissues. The tissues were placed back into the culture medium after dosing and incubated at 37°C and 5% CO2 for 6 hours (± 15 minutes).
At the end of the 6 hours treatment time, the positive control, negative control and the test item were removed by extensively rinsing the tissues with pre-warmed (room temperature) DPBS. Three clean beakers, containing a minimum of 100 mL each of DPBS were used per group. The inserts containing the tissue were lifted out of the medium by grasping the upper edge of the plastic "collar" with fine forceps. To assure throughput, the two tissues per group were rinsed simultaneously by holding the replicate inserts together by their collars using forceps. The test item or control articles were decanted from the tissue surface onto a clean absorbent material and the cultures dipped into the first beaker of DPBS, swirled in a circular motion in the liquid for approximately 2 seconds, lifted out so that the inserts were mostly filled with DPBS, and the liquid was decanted back into the container. This process was performed at least two additional times in the first beaker. The culture was then rinsed in the second and third beakers of DPBS at least three times each in the same fashion. Finally, any remaining liquid as decanted onto the absorbent material.
After rinsing, the tissues were immediately transferred in 5 mL of pre-warmed (room temperature) assay medium in a 12-well plate for 25 minutes (± 2 minutes) at room temperature.
Post-Treatment Incubation
After the 25 minutes incubation, each insert was removed from the assay medium, the medium was decanted off the tissue, and the insert were blotted on absorbent material and transferred in 6-well plates filled with 1 mL of pre-warmed (37°C) assay medium for 18 hours (± 15 minutes) at 37°C and 5% CO2.
MTT-Assay
After the post-treatment incubation period, the treated tissues were transferred in a 24-well plate filled with 300 µL MTT solution (1.0 mg/mL MTT). Once all the tissues were placed into the 24-well plate, the plate was incubated for 180 minutes (± 10 minutes) at 37°C and 5% CO2.
The inserts were removed from the 24-well plate after 180 minutes (± 10 minutes). The bottom of the inserts was blotted on absorbent material, and then transferred to a 6-well plate containing 2 ml isopropanol so that no isopropanol was flowing into the inserts. The plate was sealed with a standard plate sealer. To extract the MTT, the plates was placed on an orbital plate shaker and shaken for 2 to 3 hours at room temperature. The corresponding negative and positive controls were treated identically.
The extract solution was mixed and 2 x 200 µL were transferred into a 96-well plate.The OD was read using a spectrophotometer at 570 nm wavelength.A functional test of the microplate reader was performed using a filter test plate. The results of the functional test and the printout of the measurement were included in the raw data of the study.
Evaluation of Results
All formulas for the calculation of the relative viability were given by the supplier of the human in vitro eye model (MatTek In Vitro Life Science Laboratories).
The calculation was performed with the MS-Excel-Sheet “InVitroEyeIrritation_V01”. The mean OD (optical density) of the two negative control tissues as calculated. This value corresponds to 100% tissue viability in the current test. For each individual tissue treated with the test item or the positive control the individual relative tissue viability was calculated according to the following formula:
Viabililty (%) = (test item OD/mean negative control OD) x 100
If the test item-treated tissue viability is >60.0% relative to negative control-treated tissue viability, the test item is labeled non-irritant (UN GHS No Category).
If the test item-treated tissue viability is <=60.0% relative to negative control-treated tissue viability, the test item is labeled irritant (UN GHS Category 1 or Category 2).
Acceptance Criteria
The results are acceptable if:
The negative control OD >0.8 and <2.5
The mean relative viability of the positive control is:
a) 30 minute exposure: below 50% of control viability
b) 6 hour exposure: below 50% of control viability
The difference of viability between the two relating tissues of a single chemical is <20% in the same run (for positive and negative control tissues and tissues of single chemicals). This applies also to the killed controls (single chemicals and negative killed control) and the colorant controls which are calculated as percent values related to the viability of the relating negative control.
Results and discussion
In vitro
Results
- Irritation parameter:
- other: Viability %
- Run / experiment:
- Run 1 / Experiment 1
- Value:
- 97.8
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Other effects / acceptance of results:
- OTHER EFFECTS:
- Visible damage on test system: No observations
ACCEPTANCE OF RESULTS:
1. The negative control OD is >0.8 and <2.5 (1.403 and 1.615).
2. The mean relative viability of the positive control is below 50% of the negative control viability (47.0%).
3. The difference of viability between the two relating tissues of a single chemical is <20% (values between 1.1% to 14.0%) in the same run (for positive and negative control tissues and tissues of single chemicals).
The study met all acceptance criteria
Any other information on results incl. tables
Mean OD | Mean Viability | |
Negative Control | 1.509 | 100.0% |
Positive Control | 0.709 | 47.0% |
Test Item | 1.475 | 97.8% |
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- Under the conditions of the present study, the test item did not show an eye hazard potential. The test item is labeled non-irritant (UN GHS: No Category).
- Executive summary:
This study was performed according to GLP and the methods applied are fully compliant with OECD TG 492.The objective was to investigate the potential of the test item to induce eye irritation in an in vitro human cornea model.The test item was applied topically to a reconstructed human cornea-like epithelium model (EpiOcular) followed by determination of the cell viability. Cell viability was determined by enzymatic conversion of vital dye MTT into a blue formazan salt and measurement of the formazan salt after extraction from tissues. The percent reduction of cell viability in comparison to untreated negative controls was used to predict the eye irritation potential. Duplicates of the EpiOcular-model were treated with the test item, the negative or the positive control for 6 hours (± 15 minutes). 50 mg of the test item and 50 µL of either the negative control (sterile deionized water) or the positive control (methyl acetate) were applied to the tissues.
After treatment with the negative control (sterile deionized water) the mean OD was 1.509 (study acceptance criterion: >0.8 and <2.5). Treatment with the positive control (methyl acetate) revealed a mean viability value of 47.0% (study acceptance criterion: <50%). Thus, the acceptance criteria were met.
Following treatment with the test item, the tissue viability was 97.8% and, thus, higher than 60%, i.e.according to OECD 492 the test item is labeled non-irritant (UN GHS: No Category).
Under the conditions of the present study, the test item did not show an eye hazard potential. The test item is labeled non-irritant (UN GHS: No Category).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)